International Journal of Concrete Structures and Materials - v. 18, n. 1 (January 2024)

Published:	January 2024

Articles in this Issue

Author(s)	Title	Page(s)
Dathe, Felix / Dehn, Frank	Alkali Activation of Common Clay Deposits: Evaluation of the Suitability by an IR Spectroscopic Method
Eu, Hamin / Kim, Gyuyong / Son, Minjae / Sasui, Sasui / Lee, Yaechan / Choi, Hyeonggil / Kang, Sukpyo / Nam, Jeongsoo	Alkali-Silica Reaction and Residual Mechanical Properties of High-Strength Mortar Containing Waste Glass Fine Aggregate and Supplementary Cementitious Materials
Wang, Wei / Zhang, Congkun / Yang, Guangrui	Anti-explosion Performance of a New Type of Polyurea-Coated Corrugated Steel Plate Reinforced Concrete Slab
Zeng, Rong / Bao, En-he / Yin, Xia / Fu, Feng	The Behavior of Post-installed Rebar Connectors in Steel Frame Retrofitted Concrete Structures Under Combined Shear and Tension
Hamoda, Ahmed / Fayed, Sabry / Mansour, Walid / Emara, Mohamed	Behavior of Reinforced Concrete Circular Columns Subjected to Double Curvature Buckling Moment
Kartal, Saruhan / Kısıklı, Emin	Bending Behavior of RC Beams with Regular Web Openings and Non-corroding GFRP Reinforcement
Han, Zehong / Gao, Jing / Song, Huaihui / Xu, Gongyi	Bond Properties of CFRP Externally Bonded Reinforcement on Groove in Concrete
Alhems, Luai Mohammed / Ahmad, Aftab / Ibrahim, Mohammed / Ali, Mohammed Rizwan / Al-Shugaa, Madyan A.	Comparative Thermal Evaluation of Two Systems of Wall Panels Exposed to Hot and Arid Arabian Environmental Weather Conditions
Jahami, Ali / Issa, Camille A.	Correction: An Updated Review on the Effect of CFRP on Flexural Performance of Reinforced Concrete Beams
Sobuz, Md. Habibur Rahman / Aditto, Fahim Shahriyar / Datta, Shuvo Dip / Kabbo, Md. Kawsarul Islam / Jabin, Jannat Ara / Hasan, Noor Md. Sadiqul / Khan, Md. Munir Hayet / Rahman, S. M. Arifur / Raazi, Mehernaz / Zaman, Ahmad Akib Uz	Correction: High-Strength Self-Compacting Concrete Production Incorporating Supplementary Cementitious Materials: Experimental Evaluations and Machine Learning Modelling
Degefa, Aron Berhanu / Jeon, Geonyeol / Choi, Sooyung / Bak, Jinyeong / Park, Seunghee / Yoon, Hyungchul / Park, Solmoi	Data-Driven Insights into Controlling the Reactivity of Supplementary Cementitious Materials in Hydrated Cement
Aly, Jehan H. / Farghal Maree, A. / Kohail, Mohamed / Khalil, Ayman H.	Development Length Assessment of Bonded Post-Tensioning Slabs with Bulb-Shaped Dead end Anchorage
Amer, Ismail / Abdelkhalik, Amr / Mayhoub, Ola A. / Kohail, Mohamed	Development of Sustainable Slag-based Geopolymer Concrete Using Different Types of Chemical Admixtures
Tran, Nhi / Van Tran, Mien / Tran, Phuong / Nguyen, An Khanh / Nguyen, Cuong Quoc	Eco-Friendly 3D-Printed Concrete Using Steel Slag Aggregate: Buildability, Printability and Mechanical Properties
González, Dorys C. / Mena-Alonso, Álvaro / Mínguez, Jesús / Martínez, José A. / Vicente, Miguel A.	Effect of Fiber Orientation on the Fatigue Behavior of Steel Fiber-Reinforced Concrete Specimens by Performing Wedge Splitting Tests and Computed Tomography Scanning
Wei, Xiong / Xiaoqing, Wang / Chunmei, Li	Effect of Nano-TiO2 and Polypropylene Fiber on Mechanical Properties and Durability of Recycled Aggregate Concrete
Cho, Sanghyeon / Chung, Wonseok / Jung, Woo-Tai / Park, Jong-Sup / Lee, Heeyoung	Enhancing the Flexural Capacity of Deteriorated Low-Strength Prestressed Concrete Beam Using Near-Surface Mounted Post-Tensioned Carbon Fiber-Reinforced Polymer Bar
Sawicki, Bartłomiej / Brühwiler, Eugen	Experimental and Analytical Investigation of Deflection of R-UHPFRC Beams Subjected to Loading–Unloading
El-Salakawy, Tarik S. / Gamal, Amr A. / Sayed, Mohamed Essam	Experimental and Numerical Evaluation for Hybrid Reinforced T-Beam with Different Ratios of Recycled Rubberized Concrete
Park, Youngjun / Kim, Kukjoo / Park, Sang-Woo / Yum, Sang-Guk / Baek, Jang-Woon	Experimental Evaluation on Blast Resistance of Reinforced Concrete Structures under Partially Confined Explosion
Waenpracha, Apisith / Pannachet, Tanyada / Boonpichetvong, Maetee	Experimental Investigation on Axial Strength Improvement of Cold-Formed Steel Jacketed Concrete Stub Columns
Zeng, Jun-Jie / Lin, Xin-Chao / Feng, Sheng-Zhao / Zhu, Jiong-Yi / Zhuge, Yan / Yan, Yihang	Experimental Investigations on Tensile and Shear Behavior of the Interface Between UHP-ECC and Concrete
Park, Young-Jun / Lee, Hong-Sung / Seo, Tae-Seok	Experimental Study on Properties of Graphene and Hollow Glass Powder-Added Ultra-High Strength Concrete
Mahmoud, Ahmed A. / El Gani, Belal K. / Mustafa, Tarek S. / Khater, Ahmed N. M.	Experimental, Numerical, and Analytical Investigation of the Reinforced Concrete Hidden and Wide Beams
Kim, Min Suk / Son, Jeong Jin / Chung, Chul-Woo / Lee, Chang Joon	Factors Influencing Measurement of Dynamic Elastic Modulus from Disk-Shaped Concrete Specimen
Kim, Tae-Kyun / Park, Jong-Sup	Flexural Behavior Evaluation for Seismic, Durability and Structure Performance Improvement of Aged Bridge According to Reinforcement Methods
Makhlouf, Mohamed H. / El-Azab, Ibrahim A. / Mansour, M. H.	Flexural Improvement of RC Slabs by FRP or Steel Using Different Strengthening Systems and Novel Anchoring Techniques
Ramazani, Pari / Moradi Shaghaghi, Taleb / Farzam, Masood / Afshin, Hassan / Behnajady, Mohammad A.	Flexural Strength of Light-Weight Steel Fiber Reinforced Concrete Containing Biodegradable LDHs Microparticles: Experimental Study and Multiscale Finite Element Model
Sobuz, Md. Habibur Rahman / Aditto, Fahim Shahriyar / Datta, Shuvo Dip / Kabbo, Md. Kawsarul Islam / Jabin, Jannat Ara / Hasan, Noor Md. Sadiqul / Khan, Md. Munir Hayet / Rahman, S. M. Arifur / Raazi, Mehernaz / Zaman, Ahmad Akib Uz	High-Strength Self-Compacting Concrete Production Incorporating Supplementary Cementitious Materials: Experimental Evaluations and Machine Learning Modelling
Mardani, Alieh / Bui, Ngoc Kien / Noguchi, Takafumi	Hybrid Environmentally Friendly Method for RCA Concrete Quality Improvement
Kang, Choonghyun / Kim, Taewan / Park, Yong-Myung / Seo, Ki-Young	Hydration Characteristics of Slag-Ca(OH)2-Al2O3 Binder in a 60 °C Curing Environment with Brine as Mixing Water
Pham, Thong M. / Lee, Josh / Pournasiri, Emad / Li, Jun / Peng, zhen / Bi, Kaiming / Tran, Tung M.	Impact of Rubber Content on Performance of Ultra-High-Performance Rubberised Concrete (UHPRuC)
Fayed, Sabry / Madenci, Emrah / Özkılıç, Yasin Onuralp / Zakaria, Mohamed H.	Improving Bond Performance of Near-Surface Mounted Steel Ribbed and Threated Rods in the Concrete
Mekonen, Tadese Birlie / Alene, Temesgen Ejigu / Alem, Yared Aklilu / Nebiyu, Wallelign Mulugeta	Influence of Steel Slag as a Partial Replacement of Aggregate on Performance of Reinforced Concrete Beam
Na, Hyeong-Won / Hyung, Won-Gil	Investigation of Applicability of Non-sintered Cement Mortar for Precast Concrete by Steam Curing
Son, Minjae / Kim, Gyuyong / Lee, Sangkyu / Kim, Hongseop / Eu, Hamin / Lee, Yaechan / Sasui, Sasui / Nam, Jeongsoo	Investigation of Conditions for Using Mass-Produced Waste Glass as Sustainable Fine Aggregate for Mortar
Lee, Binna / Lee, Jong-Suk / Ryou, Jae-Suk	Long-term Compressive Strength Properties of Concrete Incorporating Admixtures: Outdoor Exposure Testing in a Coastal Environment
Han, Sangyoung / Heo, Taemin / Yeum, Chul Min / Kim, Kukjoo / Choi, Jongkwon / Tia, Mang	Machine Learning Approach to Rapidly Evaluate Curling of Concrete Pavement
Nasehi Ghashouieh, Motahereh / Malekinejad, Mohsen / Amiri, Mohammad	Microstructural Analysis of the Effect of Using Nano-silica on the Mechanical Properties of Cement–Sand Mortar Under the Effect of Heat
Shin, Hyun-Seop / Kim, Sung-Wook / Moon, Jae-Heum / Park, Gang-Kyu	Numerical Analysis of Blast Behavior for Non-ideal Explosive ANFO in Shock-Tube Test
Mostafa, Mostafa M. A.	Numerical FE Modeling and Design Methods of CCES Columns with Normal-Weight Crushed Dolomite Coarse Aggregate Fully Embedded IPE Steel-Section
Zhuang, Mei-Ling / Cheng, Jinsheng / Fei, Dongsong / Sun, Chuanzhi / Wang, Zhenbo / Chen, Baodong / Qiao, Yan	Numerical Simulation Study on the Seismic Performance of Prefabricated Fiber-Reinforced Concrete Beam–Column Joints With Grouted Sleeve Connections
Mezaouri, Sarra / Kameche, Zine el-Abidine / Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa / Houmadi, Youcef	Optimization and Characterization of Cementitious Composites Combining Maximum Amounts of Waste Glass Powder and Treated Glass Aggregates
Yan, Hua-Jun / Xie, Nan	Optimized Machine Learning Algorithms for Predicting the Punching Shear Resistance of Flat Slabs with Transverse Reinforcement
Kwon, Sukmin / Lee, Sugyu / Kang, Hyunuk / Kim, Min Kyoung / Her, Sungwun / Bae, Sungchul / Kim, Dong joo / Moon, Juhyuk	Performance of Self-healing Cementitious Mortar with PVA Fiber and SAP
Yehia, Saad A. / Fayed, Sabry / Zakaria, Mohamed H. / Shahin, Ramy I.	Prediction of RC T-Beams Shear Strength Based on Machine Learning
Yoon, Jinyoung / Yonis, Aidarus / Park, Sungwoo / Rajabipour, Farshad / Pyo, Sukhoon	Prediction of the R3 Test-Based Reactivity of Supplementary Cementitious Materials: A Machine Learning Approach Utilizing Physical and Chemical Properties
Kim, Yu-A. / Lee, Jung-Soo / Kwon, Seung-Hee / Kim, Jin-Kook	Proposal of a Creep-Experiment Method and Superficial Creep Coefficient Model of CFT Considering a Stress-Redistribution Effect
Lim, Myung-Kwan / Nam, Kyung-Yong / Choi, Hyeonggil	Protection and Heat Insulation Performance Comparison using Insulation Formwork in Winter
Zhang, Jian-cheng / Jiang, Xue-guo / Jia, Zi-kang / Cao, Mao-sen / Jia, Jin-Qing	Seismic Behavior of Steel Reinforced Ultra-High Strength Concrete Composite Frame: Experimental and Numerical Study
Makhlouf, Mohamed H. / Alaa, M. / Khaleel, Gamal I. / Elsayed, K. M. / Mansour, M. H.	Shear Behavior of Reactive Powder Concrete Ferrocement Beams with Light Weight Core Material
Dinh, Ngoc Hieu / Kim, Seung-Hee / Choi, Kyoung-Kyu	Simplification of KDS 14 Design Method for Slab–Column Connections Subjected to Unbalanced Moment
Kim, Tae-Hoon / Kang, Yun-Suk / Bang, Choon-Seok	Structural Performance Assessment of Derailment Containment Provision for Railway using a Grid Steel Frame
Shaheen, Yousry B. / Eltaly, Boshra A. / Khairy, Samar / Fayed, Sabry	Structural Performance of Ferrocement Hollow Shear Walls Subjected to Lateral and Compressive Axial Loads
Hussain, Zahid / Nanni, Antonio	Strut-and-Tie Method for GFRP-RC Deep Members
Ji, Yanting / Sun, Sheng / Chen, Aijiu / Yang, Fen / Bai, Shihua / Han, Xiaoyan	Study on Crack Resistance and Calculation Model of RAC Beams Strengthened with Prestressed CFRP
Wang, Hongbo / Yu, Yunchang / Zhang, Peiyuan / Yang, ChunYu / Wen, Hao / Zhang, Fansheng / Du, Sanlin	Study on the Diffusion Mechanism of Infiltration Grouting in Fault Fracture Zone Considering the Time-Varying Characteristics of Slurry Viscosity Under Seawater Environment
Ahmad, Shamsad / Bahraq, Ashraf A. / Al-Fakih, Amin / Yusuf, Moruf Olalekan / Al-Osta, Mohammed A.	Transport Characteristics and Corrosion Behavior of Ultra-High Performance Fiber-Reinforced Concrete with the Key Mix Parameters
Abdi, Ehsan / Asadollahfardi, Gholamreza / Salehi, Amirmasoud / Akbardoost, Javad / Esmaeili, Negar / Panahandeh, Azadeh	Using Municipal Solid-Waste Incinerator Fly Ash, Wash Water, and Propylene Fibers in Self-Compacting Repair Mortar, Greenhouse Gas Emissions Potential
Park, Sangwoo / Kim, Kukjoo / Kim, Dongku / Park, Young-Jun / Shim, Byul	Verification of Protection Performance of Concrete Blast-Proof Panels Against Internal Explosions

About this
data sheet
IssueID
71679
Published on:
08/01/2024
Last updated on:
08/01/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

International Journal of Concrete Structures and Materials - v. 18, n. 1 (January 2024)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

International Journal of Concrete Structures and Materials - v. 18, n. 1 (January 2024)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.