Experimental, Numerical, and Analytical Investigation of the Reinforced Concrete Hidden and Wide Beams

This research presents an experimental, analytical, and numerical study to predict the flexural behavior of reinforced concrete hidden and wide beams embedded in slabs. The experimentally studied parameters of testing eight specimens include beam depth, beam width, and beam eccentricity from the column. The obtained test results were compared to the predictions of finite element analysis using the ANSYS program. A numerical parametric study was conducted by the ANSYS program to explore other parameters affecting the ultimate flexural strength of beams. The studied parameters encompass concrete compressive strength, steel reinforcement strength, bottom reinforcement ratio, top-to-bottom reinforcement ratio, and web reinforcement ratio. The results revealed that an increase in beam depth led to higher ultimate load and secant stiffness, along with a decrease in deflection. The increase in beam width significantly affected beam depth, resulting in increased ultimate load and secant stiffness and a slight decrease in deflection. The increase in beam eccentricity from the column resulted in a decrease in ultimate load and secant stiffness while increasing the deflection. Comparisons between experimental and numerical results were made against calculations based on the ECP 203-2017 and ACI 318-19 codes, and the comparison yielded satisfactory results.