John T. Harvey 
- (2024): Environmental impacts from traffic on highway construction work zones: Framework and simulations. In: International Journal of Sustainable Transportation, v. 18, n. 8 (August 2024).
- (2024): Evaluation of the laboratory aging of field-blended crumb rubber modified binder. In: Construction and Building Materials, v. 423 (April 2024).
- (2023): Characterizing the Aging and Performance of Asphalt Binder Blends Containing Recycled Materials. In: Advances in Civil Engineering Materials, v. 12, n. 1 (13 March 2023).
- (2023): Engineering the performance of post-consumer calcium carbonate from carpet in cement-based materials through pre-treatment methods. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Investigation of fatigue performance of asphalt mixtures and FAM mixes with high recycled asphalt material contents. In: Construction and Building Materials, v. 314 (January 2022).
- (2006): Implementation of Automated Travel-Time Information and Public Reaction on Urban Highway Rehabilitation. In: Journal of Transportation Engineering, v. 132, n. 10 (October 2006).
- (2011): Evaluation of Laboratory, Construction, and Performance Variability by Bootstrapping and Monte Carlo Methods for Rutting Performance Prediction of Heavy Vehicle Simulator Test Sections. In: Journal of Transportation Engineering, v. 137, n. 12 (December 2011).
- (2012): Mechanistic-Empirical and Life-Cycle Cost Analysis for Optimizing Flexible Pavement Maintenance and Rehabilitation. In: Journal of Transportation Engineering, v. 138, n. 5 (May 2012).
- (2021): Mechanisms of asphalt cracking and concrete-asphalt debonding in concrete overlay on asphalt pavements. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Evaluation of Age-Hardening on Long-Term Aged Asphalt Binders. In: Construction and Building Materials, v. 304 (October 2021).
- (2002): Modeling Measured 3D Tire Contact Stresses in a Viscoelastic FE Pavement Model. In: International Journal of Geomechanics, v. 2, n. 3 (July 2002).
- (2012): Hydraulic Performance of Fully Permeable Highway Shoulder for Storm Water Runoff Management. In: Journal of Environmental Engineering (ASCE), v. 138, n. 7 (July 2012).
- (2017): Energy and environmental consequences of a cool pavement campaign. In: Energy and Buildings, v. 157 (December 2017).
- (2020): Fatigue and Fracture Properties of Asphalt Mixes Containing Low Content of Crumb-Rubber Modifier. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (October 2020).
- (2010): Investigation of the Curing Mechanism of Foamed Asphalt Mixes Based on Micromechanics Principles. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 1 (January 2010).
- (2010): Micromechanics of the Effects of Mixing Moisture on Foamed Asphalt Mix Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 10 (October 2010).
- (2011): Analysis of Representative Volume Element for Asphalt Concrete Laboratory Shear Testing. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 12 (December 2011).
- (2008): Evaluation of Corrosion Resistance of Steel Dowels Used for Concrete Pavements. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 10 (October 2008).
- (2015): Automated Sequence Selection and Cost Calculation for Maintenance and Rehabilitation in Highway Life-Cycle Cost Analysis (LCCA). In: International Journal of Transportation Science and Technology, v. 4, n. 1 (March 2015).
- (2011): The effects of asphalt binder and granular material characteristics on foamed asphalt mix strength. In: Construction and Building Materials, v. 25, n. 2 (February 2011).
- (2012): A micromechanical approach to investigate asphalt concrete rutting mechanisms. In: Construction and Building Materials, v. 30 (May 2012).
- (2012): Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures. In: Construction and Building Materials, v. 30 (May 2012).
- (2013): A fully heterogeneous viscoelastic finite element model for full-scale accelerated pavement testing. In: Construction and Building Materials, v. 43 (June 2013).
- (2013): Micromechanical investigation of open-graded asphalt friction courses' rutting mechanisms. In: Construction and Building Materials, v. 44 (July 2013).
- (2016): Evaluation of AASHTO T 324 Hamburg-Wheel Track Device test. In: Construction and Building Materials, v. 114 (July 2016).
- (2002): Case Study of Urban Concrete Pavement Reconstruction on Interstate 10. In: Journal of Construction Engineering and Management, v. 128, n. 1 (February 2002).
- (2006): Fast-Track Urban Freeway Rehabilitation with 55-H Weekend Closures: I-710 Long Beach Case Study. In: Journal of Construction Engineering and Management, v. 132, n. 5 (May 2006).
- (2013): Investigation of asphalt concrete rutting mechanisms by X-ray computed tomography imaging and micromechanical finite element modeling. In: Materials and Structures, v. 46, n. 6 (June 2013).
- (2014): Investigation of layered elastic theory prediction accuracy for asphalt concrete pavement design using micromechanical viscoelastic finite element modeling. In: Materials and Structures, v. 47, n. 3 (March 2014).
- (2005): Integrated Design/Construction/Operations Analysis for Fast-Track Urban Freeway Reconstruction. In: Journal of Construction Engineering and Management, v. 131, n. 12 (December 2005).
Structurae cooperates with
