-
Drobiec, Łukasz (2024): Technical Conditions of Diamond Vaults in Poland. In: Civil and Environmental Engineering Reports, v. 34, n. 3 (8 July 2024).
https://doi.org/10.59440/ceer/191066
-
Drobiec, Łukasz / Mazur, Wojciech / Jokiel, Remigiusz (2023): Analysis of compressive strength of AAC masonry columns strengthened circumferentially. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1979
-
Drobiec, Łukasz / Jasiński, Radosław / Mazur, Wojciech / Rybarczyk, Tomasz (2023): Influence of the type of lintel and the method of covering the window opening on the compressive strength of walls made of AAC. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1968
-
Drobiec, Łukasz / Mazur, Wojciech / Jokiel, Remigiusz (2023): Comprehensive studies of the influence of superficial strengthening with the FRCM system on the load‐bearing capacity and deformability of AAC walls. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1969
-
Drobiec, Łukasz / Jasiński, Radosław / Mazur, Wojciech / Rybarczyk, Tomasz / Połubiński, Tomasz (2023): Analysis of the impact of horizontal reinforcement on the compression and diagonal compression strength of walls made of AAC. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1975
-
Drobiec, Łukasz / Mazur, Wojciech (2023): Investigation of the influence of bed joint steel reinforcement on the load‐bearing capacity and deformability of walls made of AAC (subjected to vertical compression). Part 2 test of the wall connection zone. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1963
-
Drobiec, Łukasz / Jasiński, Radosław / Mazur, Wojciech (2023): Evaluation of the compressive strength of autoclaved aerated concrete in existing masonry. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1964
-
Drobiec, Łukasz / Mazur, Wojciech (2023): Investigation of the influence of bed joint steel reinforcement on the load‐bearing capacity and deformability of walls made of AAC (subjected to vertical compression). Part 1 zone around the window opening. In: ce/papers, v. 6, n. 2 (September 2023).
https://doi.org/10.1002/cepa.1972
-
Drobiec, Łukasz (2022): Stan techniczny dwóch żelbetowych kominów o wysokości około 300 m. In: Builder, v. 297, n. 4 (March 2022).
https://doi.org/10.5604/01.3001.0015.8048
-
Zając, Jakub / Drobiec, Łukasz / Jasiński, Radosław / Wieczorek, Mirosław / Kisiołek, Artur (2021): Experimental Tests of the Vector II Slab in Field Conditions, Slab and Strip Model. In: Civil and Environmental Engineering Reports, v. 31, n. 1 (March 2021).
https://doi.org/10.2478/ceer-2021-0004
-
Drobiec, Łukasz / Mazur, Wojciech / Rybarczyk, Tomasz (2022): Analysis of confined AAC walls under monotonic compression. In: Engineering Structures, v. 253 (February 2022).
https://doi.org/10.1016/j.engstruct.2021.113756
-
Jasiński, Radosław / Drobiec, Łukasz (2016): Comparison Research of Bed Joints Construction and Bed Joints Reinforcement on Shear Parameters of AAC Masonry Walls. In: Journal of Civil Engineering and Architecture, v. 10, n. 12 (December 2016).
https://doi.org/10.17265/1934-7359/2016.12.004
-
Drobiec, Łukasz / Mazur, Wojciech / Jokiel, Remigiusz (2020): Studies on the effects of superficial strengthening with FRCM system on compressive strength of AAC masonry. In: Budownictwo i Architektura, v. 19, n. 3 ( 2020).
https://doi.org/10.35784/bud-arch.2169
-
Drobiec, Łukasz (2020): Analyse von Spannungen und Verformungen im Brüstungsbereich von Wandmodellen aus Porenbeton und Kalksandstein. In: Mauerwerk, v. 24, n. 1 (February 2020).
https://doi.org/10.1002/dama.201800015
-
Drobiec, Łukasz (2019): Analyse von vertikal belasteten Porenbeton‐Wänden. In: Mauerwerk, v. 23, n. 6 (December 2019).
https://doi.org/10.1002/dama.201900021
-
Šlivinskas, Tomas / Jonaitis, Bronius / Drobiec, Łukasz (2016): Assessment of Bed Joints Behavior of Calcium Silicate Brick Masonry During Execution. In: Engineering Structures and Technologies, v. 8, n. 4 (December 2016).
https://doi.org/10.3846/2029882x.2016.1238784
-
Drobiec, Łukasz / Rybarczyk, Tomasz (2018): Influence of reinforced concrete confining on the load-bearing capacity of the AAC walls. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.847
-
Mazur, Wojciech / Drobiec, Łukasz / Jasiński, Radosław (2018): Effects of specimen dimensions and shape on compressive strength of specific autoclaved aerated concrete. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.837
-
Rybarczyk, Tomasz / Drobiec, Łukasz (2018): Effect of filling joints on resistance of walls under vertical loading. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.848
-
Drobiec, Łukasz / Jasiński, Radosław / Mazur, Wojciech (2018): Analysis of AAC precast lintels embedded in walls different construction. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.830
-
Drobiec, Łukasz (2018): Tests of AAC walls subjected to vertical loads - Part 1. Zone at the opening. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.824
-
Drobiec, Łukasz (2018): Tests of AAC walls subjected to vertical loads - Part 2. Connection zone of perpendicular walls. In: ce/papers, v. 2, n. 4 (September 2018).
https://doi.org/10.1002/cepa.823
-
Drobiec, Łukasz (2017): Limitation of cracking in AAC masonry under the window zone. Begrenzung von Rissbildung in Porenbetonmauerwerk im Brüstungsbereich. In: Mauerwerk, v. 21, n. 5 (October 2017).
https://doi.org/10.1002/dama.201700010