Sungchul Bae 
- (2024): Benefits of CaCO3 nanoparticles for the strain hardening behavior of high-strength alkali-activated composites based on blast furnace slag and liquid crystal display glass powder. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): A mechanism study of thermal resistance formation and post-fire strength recovery in cement paste with carbon nanotubes and nanosilica via focused ion beam/scanning electron microscopy tomography. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Performance of Self-healing Cementitious Mortar with PVA Fiber and SAP. In: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 January 2024).
- (2024): Impacts of graphene nanoribbon dispersion and stability on the mechanical and hydration properties of cement paste: Insights from surfactant-assisted ultrasonication. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Investigation of the hydrate formation and mechanical performance of limestone calcined clay cement paste incorporating nano-CaCO3 and nano-SiO2 as partial limestone substitutes. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Graphene nanoribbons: A novel additive for enhancing the fire resistance of cementitious composites. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Influences of alumina type and sulfate content on hydration and physicochemical changes in Portland–limestone cement. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Exploring the potential of pulverized oyster shell as a limestone substitute in limestone calcined clay cement (LC3) and its implications for performance. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): Evaluation of the mechanical and photocatalytic properties of TiO2-reinforced cement-based materials in binder jet 3D printing. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Comparative analysis of the synergistic effects of hybrid nanomaterial reinforcement in cementitious composites: A perspective for pore refinement and thermal resistance. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled nuclear power plants. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): Graphene nanoribbons as a novel nanofiller for enhancing the mechanical and electrical properties of cementitious composites. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Characteristic microstructural phase evolution and the compressive strength development mechanisms of tricalcium silicate pastes under various initial carbonation curing environments. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Impact of interatomic structural characteristics of aluminosilicate hydrate on the mechanical properties of metakaolin-based geopolymer. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Effect of nanomaterials (carbon nanotubes, nano-silica, graphene oxide) on bond behavior between concrete and reinforcing bars. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2014): Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (μ-SXRD). In: Cement and Concrete Research, v. 59 (May 2014).
- (2023): Insight on the mechanical properties of hierarchical porous calcium-silicate-hydrate pastes according to the Ca/Si molar ratio using in-situ synchrotron X-ray scattering and nanoindentation test. In: Construction and Building Materials, v. 365 (February 2023).
- (2023): Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Feasibility study on utilization of pulverized eggshell waste as an alternative to limestone in raw materials for Portland cement clinker production. In: Construction and Building Materials, v. 324 (March 2022).
- (2022): Flexural retrofit of existing reinforced concrete structural walls with various boundary element details under cyclic loading. In: Journal of Building Engineering, v. 52 (July 2022).
- (2021): Instant mechanical recovery of heat-damaged nanosilica-incorporated cement composites under various rehydrations procedures. In: Materials and Structures, v. 55, n. 1 (18 December 2021).
- (2021): Networking human biomarker and hazardous chemical elements from building materials: Systematic literature review and in vivo test. In: Building and Environment, v. 192 (April 2021).
- (2021): Evaluation of orientation and distribution of steel fibers in high-performance concrete column determined via micro-computed tomography. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Application of micro-CT to Mori-Tanaka method for non-randomly oriented pores in air-entrained cement pastes. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Analysis of atomistic structural deformation characteristics of calcium silicate hydrate in 53-year-old tricalcium silicate paste using atomic pair distribution function. In: Construction and Building Materials, v. 237 (March 2020).
- (2020): Influences of rehydration conditions on the mechanical and atomic structural recovery characteristics of Portland cement paste exposed to elevated temperatures. In: Construction and Building Materials, v. 235 (February 2020).
- (2013): Advanced Nanoscale Characterization of Cement Based Materials Using X-Ray Synchrotron Radiation: A Review. In: International Journal of Concrete Structures and Materials, v. 7, n. 2 (May 2013).
Structurae cooperates with
