Sungchul Bae 
- (2024): Benefits of CaCO3 nanoparticles for the strain hardening behavior of high-strength alkali-activated composites based on blast furnace slag and liquid crystal display glass powder. Dans: Construction and Building Materials, v. 449 (octobre 2024).
- (2024): A mechanism study of thermal resistance formation and post-fire strength recovery in cement paste with carbon nanotubes and nanosilica via focused ion beam/scanning electron microscopy tomography. Dans: Journal of Building Engineering, v. 97 (novembre 2024).
- (2024): Performance of Self-healing Cementitious Mortar with PVA Fiber and SAP. Dans: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 janvier 2024).
- (2024): Impacts of graphene nanoribbon dispersion and stability on the mechanical and hydration properties of cement paste: Insights from surfactant-assisted ultrasonication. Dans: Journal of Building Engineering, v. 96 (novembre 2024).
- (2024): Investigation of the hydrate formation and mechanical performance of limestone calcined clay cement paste incorporating nano-CaCO3 and nano-SiO2 as partial limestone substitutes. Dans: Construction and Building Materials, v. 418 (mars 2024).
- (2024): Graphene nanoribbons: A novel additive for enhancing the fire resistance of cementitious composites. Dans: Construction and Building Materials, v. 426 (mai 2024).
- (2024): Influences of alumina type and sulfate content on hydration and physicochemical changes in Portland–limestone cement. Dans: Construction and Building Materials, v. 426 (mai 2024).
- (2024): Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites. Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2024): Exploring the potential of pulverized oyster shell as a limestone substitute in limestone calcined clay cement (LC3) and its implications for performance. Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2023): Evaluation of the mechanical and photocatalytic properties of TiO2-reinforced cement-based materials in binder jet 3D printing. Dans: Journal of Building Engineering, v. 72 (août 2023).
- (2023): Comparative analysis of the synergistic effects of hybrid nanomaterial reinforcement in cementitious composites: A perspective for pore refinement and thermal resistance. Dans: Construction and Building Materials, v. 401 (octobre 2023).
- (2023): Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios. Dans: Construction and Building Materials, v. 400 (octobre 2023).
- (2023): Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled nuclear power plants. Dans: Construction and Building Materials, v. 373 (avril 2023).
- (2023): Graphene nanoribbons as a novel nanofiller for enhancing the mechanical and electrical properties of cementitious composites. Dans: Construction and Building Materials, v. 406 (novembre 2023).
- (2023): Characteristic microstructural phase evolution and the compressive strength development mechanisms of tricalcium silicate pastes under various initial carbonation curing environments. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2024): Impact of interatomic structural characteristics of aluminosilicate hydrate on the mechanical properties of metakaolin-based geopolymer. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2024): Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2023): Effect of nanomaterials (carbon nanotubes, nano-silica, graphene oxide) on bond behavior between concrete and reinforcing bars. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2014): Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (μ-SXRD). Dans: Cement and Concrete Research, v. 59 (mai 2014).
- (2023): Insight on the mechanical properties of hierarchical porous calcium-silicate-hydrate pastes according to the Ca/Si molar ratio using in-situ synchrotron X-ray scattering and nanoindentation test. Dans: Construction and Building Materials, v. 365 (février 2023).
- (2023): Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2022): Feasibility study on utilization of pulverized eggshell waste as an alternative to limestone in raw materials for Portland cement clinker production. Dans: Construction and Building Materials, v. 324 (mars 2022).
- (2022): Flexural retrofit of existing reinforced concrete structural walls with various boundary element details under cyclic loading. Dans: Journal of Building Engineering, v. 52 (juillet 2022).
- (2021): Instant mechanical recovery of heat-damaged nanosilica-incorporated cement composites under various rehydrations procedures. Dans: Materials and Structures, v. 55, n. 1 (18 décembre 2021).
- (2021): Networking human biomarker and hazardous chemical elements from building materials: Systematic literature review and in vivo test. Dans: Building and Environment, v. 192 (avril 2021).
- (2021): Evaluation of orientation and distribution of steel fibers in high-performance concrete column determined via micro-computed tomography. Dans: Construction and Building Materials, v. 270 (février 2021).
- (2020): Application of micro-CT to Mori-Tanaka method for non-randomly oriented pores in air-entrained cement pastes. Dans: Construction and Building Materials, v. 255 (septembre 2020).
- (2020): Analysis of atomistic structural deformation characteristics of calcium silicate hydrate in 53-year-old tricalcium silicate paste using atomic pair distribution function. Dans: Construction and Building Materials, v. 237 (mars 2020).
- (2020): Influences of rehydration conditions on the mechanical and atomic structural recovery characteristics of Portland cement paste exposed to elevated temperatures. Dans: Construction and Building Materials, v. 235 (février 2020).
- (2013): Advanced Nanoscale Characterization of Cement Based Materials Using X-Ray Synchrotron Radiation: A Review. Dans: International Journal of Concrete Structures and Materials, v. 7, n. 2 (mai 2013).
Structurae coopère avec
