Structures - January 2023

Published:	January 2023

Articles in this Issue

Author(s)	Title	Page(s)
Banaei, Ali / Alamatian, Javad / Zia Tohidi, Reza	Active control of structures using genetic algorithm with dynamic weighting factors using in the constrained objective function	189-200
Mohanty, Nupur / Mishra, Uttam Kumar / Sahu, Shishir Kumar	An adaptive neuro fuzzy inference system model for studying free in plane and out of plane vibration behavior of curved beams	1836-1845
Gantes, Charis J. / Koulatsou, Konstantina G. / Chondrogiannis, Kyriakos-Alexandros	Alternative ring flange models for buckling verification of tubular steel wind turbine towers via advanced numerical analyses and comparison to code provisions	1366-1382
Aloisio, Angelo / Boggian, Francesco / Sævareid, Håkon Østraat / Bjørkedal, Johan / Tomasi, Roberto	Analysis and enhancement of the new Eurocode 5 formulations for the lateral elastic deformation of LTF and CLT walls	1940-1956
Liu, Chaofeng / Zhou, Bao / Guo, Xingxing / Liu, Caiwei / Wang, Ling	Analysis and prediction methods for the static properties of reinforced concrete beams under fire	2319-2330
Yao, Juncheng / Zhang, Jinpeng / Huang, Liang / Xu, Jianguo / Wang, Bo	Analysis of anti-collision performance of a new assembled rolling guardrail	246-259
Zhang, Wen-Ming / Chen, Yu-peng	An analytical method for assessing the live load deformation of a suspension bridge with an improved central buckle	1341-1351
Al-samawi, Mohammed / Zhu, Jinsong / Rong, Wei	Application of 3D cellular automata-based analysis to chloride diffusion process in concrete bridges	500-519
Gatheeshgar, Perampalam / Bock, Marina / Chandrasiri, Dilanka / Suntharalingam, Thadshajini	Assessment of Eurocode shear design provisions for cold-formed steel sections	2066-2073
Mohsenian, Vahid / Gharaei-Moghaddam, Nima / Mariani, Stefano / Hajirasouliha, Iman	Assessment of the effects of non-structural components on the seismic reliability of structures via a block diagram method	2050-2065
Ji, Jing / Li, Yun H. / Jiang, Liang Q. / Zhang, Yun F. / Liu, Ying C. / He, Ling J. / Zhang, Zhan B. / Wang, Yang	Axial compression behavior of strength-gradient composite stub columns encased CFST with small diameter: Experimental and numerical investigation	282-298
Chai, Shengbo / Zhang, Jinglong / Wang, Xiulan	Basic static behaviours of an arch-cable composite bridge	1548-1557
Ismail, Fouad Ismail / Shafiq, Nasir / Abbas, Yassir M. / Ateya, El Sayed / Zahid, Muhammad / Bheel, Naraindas / Benjeddou, Omrane / Abdulkadir, Isyaka	The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing	694-708
Zheng, Baofeng / Zhang, Sibo / Yu, Lei / Shu, Ganping / Dong, Shutong	Behavior of high-strength stainless steel S600E welded I-section beams	2381-2396
Chen, Xiaowan / Yuan, Huanxin / Real, Esther	Bending-shear interaction buckling of stainless steel plate girders: Numerical investigation and design method	2113-2128
Uprety, Rupesh / Suwal, Rajan	Bidirectional effect of earthquake on low-rise RC frames with and without the consideration of In-plane effect of unreinforced masonry infill	648-664
Cao, Xuan / Xie, Xiang-Dong / Zhang, Tian-Yi / Du, Guo-Feng	Bond-slip behavior between high-strength steel tube and Ultra-high Performance Concrete	1498-1510
Zhang, Lingxin / Liu, Tao / Chen, Yongsheng	Calculations of additional axial force and coupling ratio for coupled shear walls	1531-1547
Fakharian, Pouyan / Rezazadeh Eidgahee, Danial / Akbari, Mahdi / Jahangir, Hashem / Ali Taeb, Amir	Compressive strength prediction of hollow concrete masonry blocks using artificial intelligence algorithms	1790-1802
Acharya, Ojaswi / Dahal, Aarosh / Shrestha, Kshitij C.	Confined masonry in seismic regions: Application to a prototype building in nepal	2281-2299
Zhong, Hanqing / Hao, Chaoran / Yu, Zhixiang / Lyu, Liang / Wu, Anjie	Damage assessment of RC bridge piers under rockfall impact and evaluation of a steel-sand protective structure	607-624
Zhang, Wenxue / Zheng, Yongrui / Chen, Ying / Su, Lijun / Fang, Rong / Wang, Zhibin	Damage mechanism and experimental study of continuous bridges equipped with Sc-FSB	396-411
Yang, Mianyue / Qi, Ai / Zhang, Jiayu / Chen, Yongjian	Design methodology and modified shear constitutive model of the shear pin connection	1225-1240
Farahpour, Hengameh / Hejazi, Farzad	Development of adjustable fluid damper device for the bridges subjected to traffic loads	1295-1322
Ziaee, Mohammad / Hejazi, Farzad	Development of Non-sticking Steady-State solution for structures with hybrid damping mechanism	233-245
Shen, Chen / Ruan, Xiangdang / Liu, Tianxu / Xu, Menghui / Li, Ping	A dimension-wise analysis driven active learning paired-Kriging (DWA-ALK) method for the hybrid reliability analysis	939-952
Cui, Lizhuang / Zhou, Lizhi / Xie, Quanyi / Liu, Jian / Han, Bo / Zhang, Tiantao / Luo, Hongzheng	Direct generation of finite element mesh using 3D laser point cloud	1579-1594
Shi, Yusha / Yao, Wenjuan / Jiang, Mingjing	Dynamic analysis on monopile supported offshore wind turbine under wave and wind load	520-529
Xing, Jin / Patruno, Luca / de Miranda, Stefano / Pinardi, Stefano / Majowiecki, Massimo / Ubertini, Francesco	Early stages wind load assessment using Computational Fluid Dynamics: The new Bologna Stadium roof	1912-1926
Zou, Yang / Peng, Hongbo / Zhang, Zhongya / Jiang, Jinlong / Guo, Jincen	Effect of additional constraints of push-out test on the mechanical properties of perfobond shear connectors	991-1004
Nawaz, W. / Elchalakani, M. / Yehia, S. / Pham, Thong M. / Ayough, P. / Nie, Shidong	The effect of CFRP strip stirrups on the shear strength of SCC high strength lightweight concrete beams	709-724
Dural, Ebru / Oyar, Fulya	Effect of delamination size, location and boundary conditions on the behavior of a laminated glass plate	121-133
Tan, Zhuang / Gou, Hongye / Li, Wenhao / Bao, Yi	Effect of frost heave deformation of bridge foundation on operation safety of high-speed railway	2099-2112
Amiri, Mohammad / Esfahani, M. Reza	Effect of using Engineered Cementitious Composites (ECC) on failure behavior of flat slab-column connections	2397-2407
Kee, Seong-Hoon / Choi, Jongkwon / Kim, Janghwan	Effects of stud connection failure on displacement responses of partially damaged bridges	1957-1966
Nasery, Mohammad Manzoor / Ağcakoca, Elif / Aydin, Medine / Sumer, Yusuf	Effects of support type and geometric shape of steel tube on concrete-encased concrete-filled steel tube beam under low velocity impact	781-799
Ahmed, Ahmed / Abubakr, Payam / Mohammed, Ahmed Salih	Efficient models to evaluate the effect of C3S, C2S, C3A, and C4AF contents on the long-term compressive strength of cement paste	1459-1475
de Carvalho, Adriano Silva / de Oliveira, Vinicius Moura / Rossi, Alexandre / Martins, Carlos Humberto	Elastic lateral-torsional buckling behavior of steel I-beams with sinusoidal web openings	23-36
Pouya, Armin / Izadinia, Mohsen / Memarzadeh, Parham	Energy-based collapse assessment of concentrically braced frames under mainshock-aftershock excitations	925-938
Kim, Sung-Wan / Park, Dong-Uk / Kim, Jin-Soo / Park, Jae-Bong	Estimating tension of a prestressed concrete cable-stayed bridge under construction and traffic use conditions using a vision-based system	299-312
Qiu, Kai / Li, Shuchen / Sun, Huahuai / Wang, Youzhi / Lv, Bin	Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology	625-637
Zhang, Anling / Liu, Jiadi / Wang, Jianshuo / Chen, Zhihua / Li, Yanbo	Experimental and analytical behaviour of light gauge steel-fast growing timber composite shear connections	1691-1709
Loh, Thomas W. / Stehle, John / Zhang, Guomin / Shi, Long / Nguyen, Kate T. Q.	An experimental and numerical analysis of the fire resistance of concrete elements incorporating ROBOVOID void formers	2452-2464
Ma, Xuejiao / Kong, Deren / Shi, Yucheng	Experimental and numerical investigation of blast loads induced by moving charge explosion	2037-2049
Hejazi, Mehrdad / Mehdian, Amir	Experimental and numerical investigation on masonry arch bridges under uniform and line loads	665-680
Ma, Huihuan / Lu, Kai / Liu, Xinyue	Experimental and numerical studies on lateral low-velocity impact behaviour and residual axial strength of circular aluminum alloy (6061-T6) tubes	1250-1264
Tanriverdi, Sukran	An experimental and numerical study of the strengthening of masonry brick vaults	800-813
Shan, Zhiwei / Wu, Zhuoya / Lo, S. H. / Su, R. K. L.	Experimental and numerical study on an innovative protective measure for high strength concrete using the bilayer method	2440-2451
Li, Jian / Wang, Teng / Li, Feng / You, Yegang / Kong, Zhengyi	Experimental and numerical study on the shear lag behavior of l-shaped double-steel-plate composite shear wall	1729-1742
Tian, Yukun / Li, Haitao / Chen, Ben / Lorenzo, Rodolfo / Ashraf, Mahmud	Experimental and theoretical investigation of prestressed-steel-reinforced laminated bamboo lumber beams	434-448
Iskhakov, I. / Ribakov, Y. / Holschemacher, K. / Kaeseberg, S.	Experimental case study for practical implementation of real pre-stressed two layer reinforced concrete beams	1284-1294
Liu, Kai / Liu, Jian / Li, Jun / Tao, Ming / Wu, Chengqing	Experimental investigation of heating–cooling effects on the mechanical properties of geopolymer-based high performance concrete heated to elevated temperatures	735-747
Maali, Merve Sagiroglu / Maali, Mahyar / Yazici, Casim	Experimental investigation of screwed beam-column connection using cold-formed steel back-to-back sections with gusset-plate	2025-2036
Zhu, Weiqing / Wang, Jiyun / Liu, Yongjian / Sun, Lipeng	Experimental study on axial compressive behavior of concrete-filled double-skin thin-walled steel box columns with and without PBL	1927-1939
Wang, Haitao / Huo, Jingsi / Liu, Yanzhi	Experimental study on dynamic tensile performance of Q345 structural steel considering thickness differences	891-910
Dong, Xiaonong / Dou, Tiesheng / Dong, Peng / Su, Yan / Li, Yanlong / Ning, Jinghua / Wei, Jichun / Li, Kangping / Cheng, Bingqing	Experimental study on the influence of scattered broken wires on the structural performance of prestressed concrete cylinder pipe	52-62
Geng, Kai / Jia, Lianguang / Xu, Feng / Li, Qiurong	Experimental study on the mechanical behaviour of castellated composite beams under a negative bending moment	953-965
Xue, Xuanyi / Shi, Yu / Zhou, Xuhong / Wang, Jie / Xu, Yunpeng	Experimental study on the properties of Q960 ultra–high–strength steel after fire exposure	2081-2098
Araba, Almahdi Mohamed / Zinkaah, Othman Hameed / Alhawat, Musab / Ashour, Ashraf	Experimental tests of two span continuous concrete beams reinforced with hybrid GFRP-Steel bars	2485-2500
Qi, Shaobo / Huang, Guangyan / Zhi, Xudong / Fan, Feng	External explosion-induced collapse failure mechanism on single-layer reticulated domes	177-188
Chu, K. / Hossain, K. M. A. / Lachemi, M.	Fatigue behaviour of joint-free bridges with steel and GFRP-reinforced ECC link slabs	829-845
Xu, Chenjia / Lei, Honggang / Wang, Guoqing	Fatigue life and fatigue reliability assessment for long-span spatial structure based on long-term health monitoring data	586-594
Ling, Yuhong / Zhang, Yinzi / Luo, Quan / He, An	Field measurement and simplified numerical model for vibration response of subway superstructure	313-323
Ismail, Mohamed K. / Hassan, Assem A. A. / AbdelAleem, Basem H. / El-Dakhakhni, Wael	Flexural behavior and cracking of lightweight RC beams containing coarse and fine slag aggregates	1005-1019
Rahim, Aso A. Faqe / Mohammed, Azad A. / Al-Kamaki, Yaman S. S.	Flexural behavior of composite T-beam made of plastic waste aggregate concrete web and high-strength concrete flange	2138-2147
Wan, Chunfeng / Hou, Jiale / Xue, Songtao / Zhang, Guangcai / Xie, Liyu / Huang, Guangxing	Forced vibration of a novel beam model considering the shear deformation induced rotary inertia	2541-2556
Yin, Xinfeng / Huang, Zhou / Liu, Yang	Framework of vehicle-bridge coupled analysis for suspension bridges under refined vehicle modeling considering realistic traffic behavior	1991-2005
Mi, Shaoxuan / Wang, Yuquan / Li, Linan / Liao, Lijian / Huo, Xuejin / Su, Wei	Generalized algorithm for horizontal thermal displacement at the pier top of a railway simple-supported girder bridge	725-734
Tang, Qing-Chen / Zhu, Li / Li, Jian-Zhi	Hybrid control of steel-concrete composite girder bridges considering the slip and shear-lag effects with MR–TMD based on train-bridge interactions	2300-2318
Jiang, Hang / Ye, Yong / Miao, Wei / Chen, Xiang-Qing	Hysteretic behavior of concrete-filled bimetallic tube (CFBT) columns under combined loads	1396-1407
Qin, Xi / Yang, Guotao	Hysteretic tests of stud connection subjected to combined shear and tension	862-874
Vu-Huu, T. / Pham-Van, Sy / Pham, Q-Hoan / Cuong-Le, Thanh	An improved bat algorithms for optimization design of truss structures	2240-2258
Tariq, Hisham / Najafgholipour, Mohammad Amir / Sarhosis, Vasilis / Milani, Gabriele	In-plane strength of masonry wall panels: A comparison between design codes and high-fidelity models	1869-1899
Si, Jianhui / Zeng, Zhaobao / Liu, Zewei / Li, Kai / Hu, Jiannan / Feng, Shuyang	Influence of bone joints on the axial compression stability of GFRP hollow cross arms	374-384
Xu, Liang / Hui, Yi / Liu, Gang / Qin, Jingwei	Internal resonance of generalized suspension bridge model considering torsional-vertical vibration	1754-1776
Maroofi, Elham / Mansoori, Mohammad Reza / Moghadam, Abdoreza S. / Aziminejad, Armin	Introducing a new seismic resisting system with dual linked column frame and rocking motion	2148-2161
Soltani, M. / Abolghasemian, R. / Ghasemi, A. R. / Shafieirad, M. / Abbasi, Z. / Amiri-Mehra, A. H.	Laminated optimization of non-uniform I-shaped beams under transversely loading with clamped-free boundary conditions	1524-1530
Demirtaş, Yunus / Yurdakul, Özgür / Avşar, Özgür	Lattice modelling of substandard RC beam-column joints considering localization issues	2515-2530
Zhong, Jian / Mao, Yongheng / Yuan, Xinzhe	Lifetime seismic risk assessment of bridges with construction and aging considerations	2259-2272
Qin, Xiangnan / Gu, Chongshi / Guo, Jinjun / Yuan, Dongyang / Shao, Chenfei / Chen, Xudong	Load combination feedback of fracture in concrete dams based on monitoring data with simplified fuzzy association rules	2354-2364
Sang, Liurui / Zhou, Tianhua / Zhang, Lei / Zhang, Teng / Wang, Shuaibing	Local buckling in cold-formed steel built-up I-section columns: Experiments, numerical validations and design considerations	134-152
Yu, Kequan / Lin, Manfang / Tian, Likang / Ding, Yao	Long-term stable and sustainable high-strength engineered cementitious composite incorporating limestone powder	530-543
Mehdi, Agha Intizar / Kim, Moon-Young	LTB analysis of pre-stressed mono-symmetric thin-walled beams with deviators under non-uniform bending moments using a simplified FEM	2331-2346
Zucca, Marco / Crespi, Pietro / Stochino, Flavio / Puppio, Mario Lucio / Coni, Mauro	Maintenance interventions period of existing RC motorway viaducts located in moderate/high seismicity zones	976-990
Qiao, Jinli / Sun, Yongtao / Hu, Jianbang / Zhang, Wei	Mechanical behavior of secondary lining vault void and mold grouting repair considering contact effect	385-395
Dong, Xiaoyang / Ma, Linlin / Xue, Jianyang	Mechanical behaviors of Tou-Kung in historic timber structures subjected to vertical load	1352-1365
Jingfeng, Wang / Ziming, Hu / Shen, Qihan / Guoqiang, Li / Zhenghu, Han	Mechanical investigation and design of axially-loaded concrete columns reinforced with grade 700 MPa reinforcing bars	1148-1166
Pishgahi, Farnoush / Taghikhany, Touraj	Mechanical model for seismic nonlinear behavior of rubber bearings with end-rotation in highway bridges	875-890
Chen, Ji-hao / Wang, Yu-xin / Zhu, Qian / Guo, Ming-zhen / Fan, Bu-qiao	Mechanical properties and reinforcement technology of deep joints under static and fatigue loads	1182-1195
Gardner, Leroy	Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook	2178-2193
Yang, Weiguo / Zou, Xiaoguang / Liu, Pei / Wang, Meng / Su, Yingnan	Method for the seismic performance evaluation of fasteners used for securing cultural artifacts	2006-2024
Li, Xiaofei / Zhao, Dongyan / Zhai, Haosen / Chen, Mingdong / Zhang, Tian	Modal analysis of circular arches in rectangular coordinate system	2129-2137
Vasheghani Farahani, M. / Sadeghi, J. / Ghaffarpour Jahromi, S. / Mahmoudi Sahebi, M.	Modal based method to predict subway train-induced vibration in buildings	557-572
Altunişik, Ahmet Can / Sunca, Fezayil / Sevim, Bariş	Modal parameter identification and seismic assessment of historical timber structures under near-fault and far-fault ground motions	1624-1651
Yang, Feifei / Yu, Tiantang / Bui, Tinh Quoc	Morphogenesis of free-form surfaces by an effective approach based on isogeometric analysis and particle swarm optimization	2347-2353
Vinh, Pham Van / Avcar, Mehmet / Belarbi, Mohamed-Ouejdi / Tounsi, Abdelouahed / Quang Huy, Le	A new higher-order mixed four-node quadrilateral finite element for static bending analysis of functionally graded plates	1595-1612
Zhang, Zixiang / Yang, Lu / Xiang, Shaojun / Huang, Gujian	New macroscopic model for predicting the horizontal behavior of elastomeric bearings under end-plate rotation	1086-1093
Goto, Tiago G. / Najafabadi, Hossein R. / Falheiro, Mizael F. / Moura, Rafael T. / Driemeier, Larissa / Barari, Ahmad / Tsuzuki, Marcos S. G. / Martins, Thiago C.	A new non-gradient-based topology optimization algorithm with black–white density and manufacturability constraints	1900-1911
El-Sokkary, Hossam	Nonlinear behaviour of FRP-retrofitted RC coupled shear walls	324-337
Ershadbakhsh, Amir Mohsen / Ghorbani-Tanha, Amir K. / Fallahi, Reza	A novel active tendon pendulum tuned mass damper and its application in transient vibration control	2273-2280
Nguyen, Thuy-Anh / Trinh, Son Hoang / Nguyen, May Huu / Ly, Hai-Bang	Novel ensemble approach to predict the ultimate axial load of CFST columns with different cross-sections	1-14
Zhou, Yong / Gyawali, Bigya / Zhang, Weiping	Numerical simulation of the moisture transport in unsaturated concrete	1846-1857
Peng, Q. / Wu, H. / Jia, P. C. / Ma, L. L. / Fang, Q.	Numerical studies on rebar-concrete interactions of RC members under impact and explosion	63-80
Mokhtarnejad, Negar / Garmeh, Vandad / Shariatmadar, Hashem / Askariani, Seyed Saeed	Numerical study of a novel SMA-based self-centering beam-to-column connection	1033-1049
Kumar, Erukala Kalyan / Panda, Subrata Kumar / Dwivedi, Madhuresh / Mahmoud, Samy Refahy / Balubaid, Mohammed	Numerical thermal frequency prediction of smart composite structure and experimental validation	2408-2421
Fanaie, Nader / Pesaran Behbahani, Danial / Ebrahimi, Samira	Omission of intermediate stiffeners in box link beams using trapezoidal corrugated webs	1050-1071
Fallahpasand, Sam / Dardel, Morteza / Pashaei, Mohammad Hadi	Optimal tracking vibration absorber for wideband vibration suppression	2422-2439
Wang, Qing / Chen, Binjian / Xu, Gang / Bao, Hao / Zeng, Jun / Xiang, Xuan	Optimization of test method for bond performance between steel bar and concrete	1822-1835
Guo, Junjun / Guan, Zhongguo	Optimization of the cable forces of completed cable-stayed bridges with differential evolution method	1416-1427
Zhou, Xiao-Guang / Hou, Chao / Feng, Wei-Qiang	Optimized data-driven machine learning models for axial strength prediction of rectangular CFST columns	760-780
Li, Zhihao / Zhou, Wei	Optimizing UHPC walls into trusses based on the solid isotropic material with penalization method	573-585
Manguri, Ahmed / Saeed, Najmadeen / Kazemi, Farzin / Szczepański, Marcin / Jankowski, Robert	Optimum number of actuators to minimize the cross-sectional area of prestressable cable and truss structures	2501-2514
Ma, Ying / Wu, Zebin / Cheng, Xuebin / Sun, Zhiguo / Chen, Xiaoyu	Parameter identification of hysteresis model of reinforced concrete columns considering shear action	93-104
Chang, Xinquan / Wang, Xin / Liu, Changyuan / Huang, Huang / Zhu, Zhongguo / Wu, Zhishen	Parametric analysis on the flexural behaviour of RC beams strengthened with prestressed FRP laminates	105-120
Cao, Shougang / Duan, Zhongdong / Li, Bo	Parametric study on seismic demand assessment of acceleration-sensitive nonstructural components of RC frames	1441-1458
Hasan, Hayder Alaa / Karim, Hogr / Goaiz, Hussam A. / Cabe, Aidan M. / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Performance evaluation of normal- and high-strength concrete column specimens reinforced longitudinally with different ratios of GFRP bars	1428-1440
Cao, Qi / Xu, Jihang / Wu, Zhimin / Zhang, Lihua	Performance of damaged concrete stub columns strengthened with post-tensioned CFRP under freezing-thawing environment	544-556
Li, Xianhui / Yin, Yao / Zhu, Xiang / Wang, Rui / Li, Tieying / Zhang, Qi / Li, Wenbo	Performance of hollow and aluminum foam-filled multi-cell thin-walled aluminum alloy tubes (6063-T5) under axial impact	1803-1821
Javan, Davoud / Kheyroddin, Ali / Dabiri, Hamed / Esfahani, Mohammad Reza	Performance of RC beam-column joints with hybrid GFRP-steel reinforcement under cyclic and axial loads	1408-1415
Liu, Yikang / Yang, Jian / Xu, Guoji / Wei, Huan / Deng, E.	Performance of UHPC bridge piers subjected to heavy vehicle collisions and probability analysis of damage level	212-232
Aydogan, Mehmet Safa / Alacali, Sema / Arslan, Guray	Prediction of moment redistribution capacity in reinforced concrete beams using gene expression programming	2209-2219
Yao, Yao / Zhang, Huiyun / Zhu, Yan Fei / Liu, Yufei	Progressive collapse resistance of reinforced concrete beam-column connection under fire conditions	1265-1283
Lai, Zhichao / Han, Ying / Yang, Xiaoqiang / Wang, Ying / Li, Qiang	Pull-out resistance of stud groups embedded in concrete	1383-1395
Mahmoudi, Hossein / Bitaraf, Maryam / Salkhordeh, Mojtaba / Soroushian, Siavash	A rapid machine learning-based damage detection algorithm for identifying the extent of damage in concrete shear-wall buildings	482-499
Li, Zhenkun / Lin, Weiwei / Zhang, Youqi	Real-time drive-by bridge damage detection using deep auto-encoder	1167-1181
Di, Wang / Yue, Zhao / Xuelian, Guo / Yangguang, Yuan / Xiaolong, Li	Reliability assessment of parallel wire suspender components considering interlayer corrosion variance	81-92
Haji Mazdarani, Mohammad Javad / Hoseini Vaez, Seyed Rohollah / Hosseini, Pedram / Fathali, Mohammad Ali	Reliability-based layout optimization of concentrically braced in 3D steel frames	1094-1112
Wei, Wan-Li / Chen, Ye-Qing / Wang, Zhen-Qing / Li, Shu-Tao / Huang, Cheng-Long / Gao, Zhen	Research on damage effect of the concrete target under the penetration and explosion integration	1511-1523
Zheng, Tengteng / Zhao, Caiqi / He, Jianghui	Research on fatigue performance of offshore wind turbine blade with basalt fiber bionic plate	466-481
Chen, Mingchao / Zhu, Chundong / Yu, Zhongquan / Ma, Chong	Research on plastic deformation transfer and distribution of large-diameter thin-walled metal ring parts in double-roll pendulum hot rotary forging process	2194-2208
Liang, Yuhan / Chen, Zongping / Liu, Xiang / Liao, Haoyu	Seismic behavior of RC cross-shaped column under combined torsion loading: Experiment and simulation finite element	1652-1667
Zhu, Wang / Xie, Qiang / Liu, Xiao	Seismic failure risk analysis of ± 800 kV coupling filter circuit considering material strength deviation	1566-1578
Zhong, Jian / Zheng, Xianglin / Wu, Qiaofei / Jiang, Linwei / He, Min / Dang, Xinzhi	Seismic fragility and resilience assessment of bridge columns with dual-replaceable composite link beam under near-fault GMs	412-424
Sathurshan, Mathavanayakam / Thamboo, Julian / Mallikarachchi, Chinthaka / Wijesundara, Kushan	Seismic fragility of lightly reinforced concrete school building typologies with different masonry infill configurations	1710-1728
Yang, Jinping / Zhang, Fengfan / Li, Peizhen / Jing, Hang	Seismic performance of column-bearing silo structure with granular materials considering SSI effect	595-606
Fu, Tao / Wang, Kai / Zhu, Zhixin / Ren, Xiaoqian / Li, Yan / Xu, Longwei / Meng, Lingxiao / Sun, Zhonghua	Seismic performance of prefabricated square hollow section piers strengthened by jacketing using UHPC and high-strength steel	449-465
Peker, Kerem / Akgönen, A. İlker	Seismic performance of weak-axis moment connections with reduced panel zone	201-211
Liao, Man / Yang, Yongqing / Luo, Deng / Zhao, Canhui	Seismic response analysis of long-span continuous girder bridge considering fluctuating friction of bearing	2162-2177
Wang, Fuming / Tulamaiti, Yunusijiang / Fang, Hongyuan / Yu, Xiang / Zhou, Chenguang	Seismic response characteristics of polymer anti-seepage wall in earth dam based on earthquake wave motion input method	358-373
Ghaderi Barmi, Cirous / Saghafi, Mohammad Hossein / Golafshar, Ali	Seismic retrofit of severely damaged beam-column RC joints using HPFRCC	1020-1032
Huang, Wei / Deng, Kailai / Huang, Yuanyuan / Zhan, Yulin / Mou, Tingmin	Seismic risk to beam end corner in railway bridges	15-22
Otero, Roi / Lagüela, Susana / Cabaleiro, Manuel / Sousa, Hélder S. / Arias, Pedro	Semi-automatic 3D frame modelling of wooden trusses using indoor point clouds	1743-1753
Cacho-Pérez, M.	Sequential Plastic Method for 2D frames limit analysis	1680-1690
Dai, Jianbo / Wang, Zhiqiang / Wang, Zhaocheng / Wang, Hao / Ma, Jing / Zhao, Zewen	Shake table test and numerical analysis of the seismic response of buried long-distance pipeline under longitudinal non-uniform excitation	1241-1249
Yang, Haixu / Li, Zhuo / Wang, Haibiao / Zhang, Maohua / Ni, Songyuan	Shaking table test study on seismic performance of RC frame structure with NES	153-164
Su, Xiaolong / Zhou, Man / Tanwari, Kamran Anwar	Shear behavior of prismatic and nonprismatic beams with trapezoidal steel web corrugations considering secondary internal force induced by external prestressing	638-647
Abbas, Yassir M.	Shear behavior of ultra-high-performance reinforced concrete beams – Finite element and uncertainty quantification study	2365-2380
Shi, Feng-Wei / Ding, Yang / Zong, Liang / Chen, Yang / Wu, Ying	Shear behaviour of vertical inter-module connection with bolts and shear keys for MSCs	260-281
Sandeep, M. S. / Tiprak, Koravith / Kaewunruen, Sakdirat / Pheinsusom, Phoonsak / Pansuk, Withit	Shear strength prediction of reinforced concrete beams using machine learning	1196-1211
Sui, Yi / Zou, Degao / Chen, Kai	Shock vibration and damage responses of nuclear island subjected to an aircraft crash	1476-1497
Long, Xiaohong / Gui, Shihai / Ma, Yongtao / Turgun, Ahmed / Zhou, Qunlin / Lu, Chunde	Simplified design method of pounding-unseating-prevention device for LRB isolated continuous girder bridge	1777-1789
Saadatkhah, Amir / Reza Chenaghlou, Mohammad / Poursha, Mehdi	A simplified formula for the determination of the fundamental period of mixed structures with vertical combination of different seismic resisting systems	681-693
Zhong, Wen / Song, Yongsheng / Ding, Youliang / Fang, Zhao	A simplified method for fatigue life evaluation of welded joints in OSD considering welding residual stress relaxation	165-176
Al-Rousan, Rajai Z. / Qudaisat, Muneer S.	Single keyed joints behaviour and capacity formulation under direct shear using non-linear finite-element analysis	911-924
An, Renbing / You, Wenlong / Pan, Yi / Fan, Yuanqing	Static and dynamic analyses of traditional Chinese timber columns under horizontal accelerations	37-51
Mashrah, W. A. H. / Chen, Zhihua / Liu, Hongbo / Rima, Boufendassa / Mogalli, Abdullah	Static performance of steel temcor joints subjected to axial tension and compression loads	1113-1133
Liu, Ping / Yue, Ma / Zhe Feng, Shu / Ngamkhanong, Chayut	Structural behaviour of air-inflated beams	1613-1623
Fayed, Sabry / Mansour, Walid	Structural performance of seasand recycled aggregate concrete filled Solid/Hollow aluminum tubular Columns: An experimental work	1323-1340
Bavandi, Mohammad / Amiri, Gholamreza Ghodrati / Rajabi, Elham / Moghadam, Abdolreza S.	Study of the resilience index for steel moment frames with reversible connections	814-828
Zheng, Han / Qiao, Huiyun / Chen, Yu / Yang, Bo / Zhu, Bin / Lai, Lifang	Study on anti-progressive collapse performance of cellular steel frames with different web opening shapes	338-357
Yang, Yanmin / Ge, Zesen / Li, Yongqing / Xiong, Ying / Yuan, Qi	Study on impact resistance of precast light-weight concrete sandwich panels	966-975
Liu, Lei / Zhang, Long / Zhu, Li / Li, Jian / Yang, Yifan / Hao, Lin	Study on mechanical properties of stud connectors in steel-lightweight aggregate concrete composite structures	1072-1085
Qiu, Zhiping / Zhu, Bo	A symplectic homotopy perturbation method for random structural dynamics response analysis based on Birkhoffian systems	1668-1679
Colak, Huseyin / Soyoz, Serdar	Time-dependent seismic performance assessment of RC buildings exposed to corrosion	1134-1147
Montemurro, Marco / Bertolino, Giulia / Panettieri, Enrico	Topology optimisation of architected cellular materials from additive manufacturing: Analysis, design, and experiments	2220-2239
Zhou, Xiang / Liao, Wenyuan / Liu, Dewen	Ultimate bearing capacity of composite beams with reinforced web opening under hogging moment: Practical calculation method	2531-2540
Heinisuo, Markku / Pajunen, Sami / Aspila, Aku	Ultimate failure load analysis of cross-laminated timber panels subjected to in-plane compression	1558-1565
Gholami, Esmail / Afshin, Hassan / Basim, Mohammad Charkhtab / Sharghi, Mohammad	Ultra-high performance recycled steel fiber reinforced concrete segments under the thrust force of TBM jacks and their environmental potentialities	2465-2484
Wu, Tianyu / Qiu, Wenliang / Yao, Guowen / Guo, Zengwei	Vehicle ride comfort analysis on sea-crossing bridges under drift ice load	846-861
Massone, Leonardo M. / Rosa, José / Mesa, Álvaro	Versatile hysteretic model of reinforcing steel bars with buckling	1858-1868
Wang, Zhihao / Wen, Jinlong / Kou, Chen / Huo, Hongyuan / Chen, Aijiu / Fan, Buqiao	Vertical human-structure interaction of a simply-supported steel-glass composite footbridge under both standing and moving pedestrians	1212-1224
Fang, Zhiyuan / Roy, Krishanu / Padiyara, Sujith / Chen, Boshan / Raftery, Gary M. / Lim, James B. P.	Web crippling design of cold-formed stainless steel channels under interior-two-flange loading condition using deep belief network	1967-1990
Harte, Annette M. / Baylor, Gordon / O'Ceallaigh, Conan	Web geometry optimisation of novel latticed LVL-webbed timber I-joists	748-759
Ding, Yang / Ye, Xiao-Wei / Guo, Yong	Wind load assessment with the JPDF of wind speed and direction based on SHM data	2074-2080
Li, Chuangdi / Yang, Xuefeng / Li, Yuxiang / Ge, Xinguang	Wind vibration responses of structure with generalized Maxwell model viscoelastic dampers	425-433

About this
data sheet
IssueID
68694
Published on:
10/12/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structures - January 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structures - January 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.