Structures - Januar 2023

Erschienen:	Januar 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Banaei, Ali / Alamatian, Javad / Zia Tohidi, Reza	Active control of structures using genetic algorithm with dynamic weighting factors using in the constrained objective function	189-200
Mohanty, Nupur / Mishra, Uttam Kumar / Sahu, Shishir Kumar	An adaptive neuro fuzzy inference system model for studying free in plane and out of plane vibration behavior of curved beams	1836-1845
Gantes, Charis J. / Koulatsou, Konstantina G. / Chondrogiannis, Kyriakos-Alexandros	Alternative ring flange models for buckling verification of tubular steel wind turbine towers via advanced numerical analyses and comparison to code provisions	1366-1382
Aloisio, Angelo / Boggian, Francesco / Sævareid, Håkon Østraat / Bjørkedal, Johan / Tomasi, Roberto	Analysis and enhancement of the new Eurocode 5 formulations for the lateral elastic deformation of LTF and CLT walls	1940-1956
Liu, Chaofeng / Zhou, Bao / Guo, Xingxing / Liu, Caiwei / Wang, Ling	Analysis and prediction methods for the static properties of reinforced concrete beams under fire	2319-2330
Yao, Juncheng / Zhang, Jinpeng / Huang, Liang / Xu, Jianguo / Wang, Bo	Analysis of anti-collision performance of a new assembled rolling guardrail	246-259
Zhang, Wen-Ming / Chen, Yu-peng	An analytical method for assessing the live load deformation of a suspension bridge with an improved central buckle	1341-1351
Al-samawi, Mohammed / Zhu, Jinsong / Rong, Wei	Application of 3D cellular automata-based analysis to chloride diffusion process in concrete bridges	500-519
Gatheeshgar, Perampalam / Bock, Marina / Chandrasiri, Dilanka / Suntharalingam, Thadshajini	Assessment of Eurocode shear design provisions for cold-formed steel sections	2066-2073
Mohsenian, Vahid / Gharaei-Moghaddam, Nima / Mariani, Stefano / Hajirasouliha, Iman	Assessment of the effects of non-structural components on the seismic reliability of structures via a block diagram method	2050-2065
Ji, Jing / Li, Yun H. / Jiang, Liang Q. / Zhang, Yun F. / Liu, Ying C. / He, Ling J. / Zhang, Zhan B. / Wang, Yang	Axial compression behavior of strength-gradient composite stub columns encased CFST with small diameter: Experimental and numerical investigation	282-298
Chai, Shengbo / Zhang, Jinglong / Wang, Xiulan	Basic static behaviours of an arch-cable composite bridge	1548-1557
Ismail, Fouad Ismail / Shafiq, Nasir / Abbas, Yassir M. / Ateya, El Sayed / Zahid, Muhammad / Bheel, Naraindas / Benjeddou, Omrane / Abdulkadir, Isyaka	The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing	694-708
Zheng, Baofeng / Zhang, Sibo / Yu, Lei / Shu, Ganping / Dong, Shutong	Behavior of high-strength stainless steel S600E welded I-section beams	2381-2396
Chen, Xiaowan / Yuan, Huanxin / Real, Esther	Bending-shear interaction buckling of stainless steel plate girders: Numerical investigation and design method	2113-2128
Uprety, Rupesh / Suwal, Rajan	Bidirectional effect of earthquake on low-rise RC frames with and without the consideration of In-plane effect of unreinforced masonry infill	648-664
Cao, Xuan / Xie, Xiang-Dong / Zhang, Tian-Yi / Du, Guo-Feng	Bond-slip behavior between high-strength steel tube and Ultra-high Performance Concrete	1498-1510
Zhang, Lingxin / Liu, Tao / Chen, Yongsheng	Calculations of additional axial force and coupling ratio for coupled shear walls	1531-1547
Fakharian, Pouyan / Rezazadeh Eidgahee, Danial / Akbari, Mahdi / Jahangir, Hashem / Ali Taeb, Amir	Compressive strength prediction of hollow concrete masonry blocks using artificial intelligence algorithms	1790-1802
Acharya, Ojaswi / Dahal, Aarosh / Shrestha, Kshitij C.	Confined masonry in seismic regions: Application to a prototype building in nepal	2281-2299
Zhong, Hanqing / Hao, Chaoran / Yu, Zhixiang / Lyu, Liang / Wu, Anjie	Damage assessment of RC bridge piers under rockfall impact and evaluation of a steel-sand protective structure	607-624
Zhang, Wenxue / Zheng, Yongrui / Chen, Ying / Su, Lijun / Fang, Rong / Wang, Zhibin	Damage mechanism and experimental study of continuous bridges equipped with Sc-FSB	396-411
Yang, Mianyue / Qi, Ai / Zhang, Jiayu / Chen, Yongjian	Design methodology and modified shear constitutive model of the shear pin connection	1225-1240
Farahpour, Hengameh / Hejazi, Farzad	Development of adjustable fluid damper device for the bridges subjected to traffic loads	1295-1322
Ziaee, Mohammad / Hejazi, Farzad	Development of Non-sticking Steady-State solution for structures with hybrid damping mechanism	233-245
Shen, Chen / Ruan, Xiangdang / Liu, Tianxu / Xu, Menghui / Li, Ping	A dimension-wise analysis driven active learning paired-Kriging (DWA-ALK) method for the hybrid reliability analysis	939-952
Cui, Lizhuang / Zhou, Lizhi / Xie, Quanyi / Liu, Jian / Han, Bo / Zhang, Tiantao / Luo, Hongzheng	Direct generation of finite element mesh using 3D laser point cloud	1579-1594
Shi, Yusha / Yao, Wenjuan / Jiang, Mingjing	Dynamic analysis on monopile supported offshore wind turbine under wave and wind load	520-529
Xing, Jin / Patruno, Luca / de Miranda, Stefano / Pinardi, Stefano / Majowiecki, Massimo / Ubertini, Francesco	Early stages wind load assessment using Computational Fluid Dynamics: The new Bologna Stadium roof	1912-1926
Zou, Yang / Peng, Hongbo / Zhang, Zhongya / Jiang, Jinlong / Guo, Jincen	Effect of additional constraints of push-out test on the mechanical properties of perfobond shear connectors	991-1004
Nawaz, W. / Elchalakani, M. / Yehia, S. / Pham, Thong M. / Ayough, P. / Nie, Shidong	The effect of CFRP strip stirrups on the shear strength of SCC high strength lightweight concrete beams	709-724
Dural, Ebru / Oyar, Fulya	Effect of delamination size, location and boundary conditions on the behavior of a laminated glass plate	121-133
Tan, Zhuang / Gou, Hongye / Li, Wenhao / Bao, Yi	Effect of frost heave deformation of bridge foundation on operation safety of high-speed railway	2099-2112
Amiri, Mohammad / Esfahani, M. Reza	Effect of using Engineered Cementitious Composites (ECC) on failure behavior of flat slab-column connections	2397-2407
Kee, Seong-Hoon / Choi, Jongkwon / Kim, Janghwan	Effects of stud connection failure on displacement responses of partially damaged bridges	1957-1966
Nasery, Mohammad Manzoor / Ağcakoca, Elif / Aydin, Medine / Sumer, Yusuf	Effects of support type and geometric shape of steel tube on concrete-encased concrete-filled steel tube beam under low velocity impact	781-799
Ahmed, Ahmed / Abubakr, Payam / Mohammed, Ahmed Salih	Efficient models to evaluate the effect of C3S, C2S, C3A, and C4AF contents on the long-term compressive strength of cement paste	1459-1475
de Carvalho, Adriano Silva / de Oliveira, Vinicius Moura / Rossi, Alexandre / Martins, Carlos Humberto	Elastic lateral-torsional buckling behavior of steel I-beams with sinusoidal web openings	23-36
Pouya, Armin / Izadinia, Mohsen / Memarzadeh, Parham	Energy-based collapse assessment of concentrically braced frames under mainshock-aftershock excitations	925-938
Kim, Sung-Wan / Park, Dong-Uk / Kim, Jin-Soo / Park, Jae-Bong	Estimating tension of a prestressed concrete cable-stayed bridge under construction and traffic use conditions using a vision-based system	299-312
Qiu, Kai / Li, Shuchen / Sun, Huahuai / Wang, Youzhi / Lv, Bin	Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology	625-637
Zhang, Anling / Liu, Jiadi / Wang, Jianshuo / Chen, Zhihua / Li, Yanbo	Experimental and analytical behaviour of light gauge steel-fast growing timber composite shear connections	1691-1709
Loh, Thomas W. / Stehle, John / Zhang, Guomin / Shi, Long / Nguyen, Kate T. Q.	An experimental and numerical analysis of the fire resistance of concrete elements incorporating ROBOVOID void formers	2452-2464
Ma, Xuejiao / Kong, Deren / Shi, Yucheng	Experimental and numerical investigation of blast loads induced by moving charge explosion	2037-2049
Hejazi, Mehrdad / Mehdian, Amir	Experimental and numerical investigation on masonry arch bridges under uniform and line loads	665-680
Ma, Huihuan / Lu, Kai / Liu, Xinyue	Experimental and numerical studies on lateral low-velocity impact behaviour and residual axial strength of circular aluminum alloy (6061-T6) tubes	1250-1264
Tanriverdi, Sukran	An experimental and numerical study of the strengthening of masonry brick vaults	800-813
Shan, Zhiwei / Wu, Zhuoya / Lo, S. H. / Su, R. K. L.	Experimental and numerical study on an innovative protective measure for high strength concrete using the bilayer method	2440-2451
Li, Jian / Wang, Teng / Li, Feng / You, Yegang / Kong, Zhengyi	Experimental and numerical study on the shear lag behavior of l-shaped double-steel-plate composite shear wall	1729-1742
Tian, Yukun / Li, Haitao / Chen, Ben / Lorenzo, Rodolfo / Ashraf, Mahmud	Experimental and theoretical investigation of prestressed-steel-reinforced laminated bamboo lumber beams	434-448
Iskhakov, I. / Ribakov, Y. / Holschemacher, K. / Kaeseberg, S.	Experimental case study for practical implementation of real pre-stressed two layer reinforced concrete beams	1284-1294
Liu, Kai / Liu, Jian / Li, Jun / Tao, Ming / Wu, Chengqing	Experimental investigation of heating–cooling effects on the mechanical properties of geopolymer-based high performance concrete heated to elevated temperatures	735-747
Maali, Merve Sagiroglu / Maali, Mahyar / Yazici, Casim	Experimental investigation of screwed beam-column connection using cold-formed steel back-to-back sections with gusset-plate	2025-2036
Zhu, Weiqing / Wang, Jiyun / Liu, Yongjian / Sun, Lipeng	Experimental study on axial compressive behavior of concrete-filled double-skin thin-walled steel box columns with and without PBL	1927-1939
Wang, Haitao / Huo, Jingsi / Liu, Yanzhi	Experimental study on dynamic tensile performance of Q345 structural steel considering thickness differences	891-910
Dong, Xiaonong / Dou, Tiesheng / Dong, Peng / Su, Yan / Li, Yanlong / Ning, Jinghua / Wei, Jichun / Li, Kangping / Cheng, Bingqing	Experimental study on the influence of scattered broken wires on the structural performance of prestressed concrete cylinder pipe	52-62
Geng, Kai / Jia, Lianguang / Xu, Feng / Li, Qiurong	Experimental study on the mechanical behaviour of castellated composite beams under a negative bending moment	953-965
Xue, Xuanyi / Shi, Yu / Zhou, Xuhong / Wang, Jie / Xu, Yunpeng	Experimental study on the properties of Q960 ultra–high–strength steel after fire exposure	2081-2098
Araba, Almahdi Mohamed / Zinkaah, Othman Hameed / Alhawat, Musab / Ashour, Ashraf	Experimental tests of two span continuous concrete beams reinforced with hybrid GFRP-Steel bars	2485-2500
Qi, Shaobo / Huang, Guangyan / Zhi, Xudong / Fan, Feng	External explosion-induced collapse failure mechanism on single-layer reticulated domes	177-188
Chu, K. / Hossain, K. M. A. / Lachemi, M.	Fatigue behaviour of joint-free bridges with steel and GFRP-reinforced ECC link slabs	829-845
Xu, Chenjia / Lei, Honggang / Wang, Guoqing	Fatigue life and fatigue reliability assessment for long-span spatial structure based on long-term health monitoring data	586-594
Ling, Yuhong / Zhang, Yinzi / Luo, Quan / He, An	Field measurement and simplified numerical model for vibration response of subway superstructure	313-323
Ismail, Mohamed K. / Hassan, Assem A. A. / AbdelAleem, Basem H. / El-Dakhakhni, Wael	Flexural behavior and cracking of lightweight RC beams containing coarse and fine slag aggregates	1005-1019
Rahim, Aso A. Faqe / Mohammed, Azad A. / Al-Kamaki, Yaman S. S.	Flexural behavior of composite T-beam made of plastic waste aggregate concrete web and high-strength concrete flange	2138-2147
Wan, Chunfeng / Hou, Jiale / Xue, Songtao / Zhang, Guangcai / Xie, Liyu / Huang, Guangxing	Forced vibration of a novel beam model considering the shear deformation induced rotary inertia	2541-2556
Yin, Xinfeng / Huang, Zhou / Liu, Yang	Framework of vehicle-bridge coupled analysis for suspension bridges under refined vehicle modeling considering realistic traffic behavior	1991-2005
Mi, Shaoxuan / Wang, Yuquan / Li, Linan / Liao, Lijian / Huo, Xuejin / Su, Wei	Generalized algorithm for horizontal thermal displacement at the pier top of a railway simple-supported girder bridge	725-734
Tang, Qing-Chen / Zhu, Li / Li, Jian-Zhi	Hybrid control of steel-concrete composite girder bridges considering the slip and shear-lag effects with MR–TMD based on train-bridge interactions	2300-2318
Jiang, Hang / Ye, Yong / Miao, Wei / Chen, Xiang-Qing	Hysteretic behavior of concrete-filled bimetallic tube (CFBT) columns under combined loads	1396-1407
Qin, Xi / Yang, Guotao	Hysteretic tests of stud connection subjected to combined shear and tension	862-874
Vu-Huu, T. / Pham-Van, Sy / Pham, Q-Hoan / Cuong-Le, Thanh	An improved bat algorithms for optimization design of truss structures	2240-2258
Tariq, Hisham / Najafgholipour, Mohammad Amir / Sarhosis, Vasilis / Milani, Gabriele	In-plane strength of masonry wall panels: A comparison between design codes and high-fidelity models	1869-1899
Si, Jianhui / Zeng, Zhaobao / Liu, Zewei / Li, Kai / Hu, Jiannan / Feng, Shuyang	Influence of bone joints on the axial compression stability of GFRP hollow cross arms	374-384
Xu, Liang / Hui, Yi / Liu, Gang / Qin, Jingwei	Internal resonance of generalized suspension bridge model considering torsional-vertical vibration	1754-1776
Maroofi, Elham / Mansoori, Mohammad Reza / Moghadam, Abdoreza S. / Aziminejad, Armin	Introducing a new seismic resisting system with dual linked column frame and rocking motion	2148-2161
Soltani, M. / Abolghasemian, R. / Ghasemi, A. R. / Shafieirad, M. / Abbasi, Z. / Amiri-Mehra, A. H.	Laminated optimization of non-uniform I-shaped beams under transversely loading with clamped-free boundary conditions	1524-1530
Demirtaş, Yunus / Yurdakul, Özgür / Avşar, Özgür	Lattice modelling of substandard RC beam-column joints considering localization issues	2515-2530
Zhong, Jian / Mao, Yongheng / Yuan, Xinzhe	Lifetime seismic risk assessment of bridges with construction and aging considerations	2259-2272
Qin, Xiangnan / Gu, Chongshi / Guo, Jinjun / Yuan, Dongyang / Shao, Chenfei / Chen, Xudong	Load combination feedback of fracture in concrete dams based on monitoring data with simplified fuzzy association rules	2354-2364
Sang, Liurui / Zhou, Tianhua / Zhang, Lei / Zhang, Teng / Wang, Shuaibing	Local buckling in cold-formed steel built-up I-section columns: Experiments, numerical validations and design considerations	134-152
Yu, Kequan / Lin, Manfang / Tian, Likang / Ding, Yao	Long-term stable and sustainable high-strength engineered cementitious composite incorporating limestone powder	530-543
Mehdi, Agha Intizar / Kim, Moon-Young	LTB analysis of pre-stressed mono-symmetric thin-walled beams with deviators under non-uniform bending moments using a simplified FEM	2331-2346
Zucca, Marco / Crespi, Pietro / Stochino, Flavio / Puppio, Mario Lucio / Coni, Mauro	Maintenance interventions period of existing RC motorway viaducts located in moderate/high seismicity zones	976-990
Qiao, Jinli / Sun, Yongtao / Hu, Jianbang / Zhang, Wei	Mechanical behavior of secondary lining vault void and mold grouting repair considering contact effect	385-395
Dong, Xiaoyang / Ma, Linlin / Xue, Jianyang	Mechanical behaviors of Tou-Kung in historic timber structures subjected to vertical load	1352-1365
Jingfeng, Wang / Ziming, Hu / Shen, Qihan / Guoqiang, Li / Zhenghu, Han	Mechanical investigation and design of axially-loaded concrete columns reinforced with grade 700 MPa reinforcing bars	1148-1166
Pishgahi, Farnoush / Taghikhany, Touraj	Mechanical model for seismic nonlinear behavior of rubber bearings with end-rotation in highway bridges	875-890
Chen, Ji-hao / Wang, Yu-xin / Zhu, Qian / Guo, Ming-zhen / Fan, Bu-qiao	Mechanical properties and reinforcement technology of deep joints under static and fatigue loads	1182-1195
Gardner, Leroy	Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook	2178-2193
Yang, Weiguo / Zou, Xiaoguang / Liu, Pei / Wang, Meng / Su, Yingnan	Method for the seismic performance evaluation of fasteners used for securing cultural artifacts	2006-2024
Li, Xiaofei / Zhao, Dongyan / Zhai, Haosen / Chen, Mingdong / Zhang, Tian	Modal analysis of circular arches in rectangular coordinate system	2129-2137
Vasheghani Farahani, M. / Sadeghi, J. / Ghaffarpour Jahromi, S. / Mahmoudi Sahebi, M.	Modal based method to predict subway train-induced vibration in buildings	557-572
Altunişik, Ahmet Can / Sunca, Fezayil / Sevim, Bariş	Modal parameter identification and seismic assessment of historical timber structures under near-fault and far-fault ground motions	1624-1651
Yang, Feifei / Yu, Tiantang / Bui, Tinh Quoc	Morphogenesis of free-form surfaces by an effective approach based on isogeometric analysis and particle swarm optimization	2347-2353
Vinh, Pham Van / Avcar, Mehmet / Belarbi, Mohamed-Ouejdi / Tounsi, Abdelouahed / Quang Huy, Le	A new higher-order mixed four-node quadrilateral finite element for static bending analysis of functionally graded plates	1595-1612
Zhang, Zixiang / Yang, Lu / Xiang, Shaojun / Huang, Gujian	New macroscopic model for predicting the horizontal behavior of elastomeric bearings under end-plate rotation	1086-1093
Goto, Tiago G. / Najafabadi, Hossein R. / Falheiro, Mizael F. / Moura, Rafael T. / Driemeier, Larissa / Barari, Ahmad / Tsuzuki, Marcos S. G. / Martins, Thiago C.	A new non-gradient-based topology optimization algorithm with black–white density and manufacturability constraints	1900-1911
El-Sokkary, Hossam	Nonlinear behaviour of FRP-retrofitted RC coupled shear walls	324-337
Ershadbakhsh, Amir Mohsen / Ghorbani-Tanha, Amir K. / Fallahi, Reza	A novel active tendon pendulum tuned mass damper and its application in transient vibration control	2273-2280
Nguyen, Thuy-Anh / Trinh, Son Hoang / Nguyen, May Huu / Ly, Hai-Bang	Novel ensemble approach to predict the ultimate axial load of CFST columns with different cross-sections	1-14
Zhou, Yong / Gyawali, Bigya / Zhang, Weiping	Numerical simulation of the moisture transport in unsaturated concrete	1846-1857
Peng, Q. / Wu, H. / Jia, P. C. / Ma, L. L. / Fang, Q.	Numerical studies on rebar-concrete interactions of RC members under impact and explosion	63-80
Mokhtarnejad, Negar / Garmeh, Vandad / Shariatmadar, Hashem / Askariani, Seyed Saeed	Numerical study of a novel SMA-based self-centering beam-to-column connection	1033-1049
Kumar, Erukala Kalyan / Panda, Subrata Kumar / Dwivedi, Madhuresh / Mahmoud, Samy Refahy / Balubaid, Mohammed	Numerical thermal frequency prediction of smart composite structure and experimental validation	2408-2421
Fanaie, Nader / Pesaran Behbahani, Danial / Ebrahimi, Samira	Omission of intermediate stiffeners in box link beams using trapezoidal corrugated webs	1050-1071
Fallahpasand, Sam / Dardel, Morteza / Pashaei, Mohammad Hadi	Optimal tracking vibration absorber for wideband vibration suppression	2422-2439
Wang, Qing / Chen, Binjian / Xu, Gang / Bao, Hao / Zeng, Jun / Xiang, Xuan	Optimization of test method for bond performance between steel bar and concrete	1822-1835
Guo, Junjun / Guan, Zhongguo	Optimization of the cable forces of completed cable-stayed bridges with differential evolution method	1416-1427
Zhou, Xiao-Guang / Hou, Chao / Feng, Wei-Qiang	Optimized data-driven machine learning models for axial strength prediction of rectangular CFST columns	760-780
Li, Zhihao / Zhou, Wei	Optimizing UHPC walls into trusses based on the solid isotropic material with penalization method	573-585
Manguri, Ahmed / Saeed, Najmadeen / Kazemi, Farzin / Szczepański, Marcin / Jankowski, Robert	Optimum number of actuators to minimize the cross-sectional area of prestressable cable and truss structures	2501-2514
Ma, Ying / Wu, Zebin / Cheng, Xuebin / Sun, Zhiguo / Chen, Xiaoyu	Parameter identification of hysteresis model of reinforced concrete columns considering shear action	93-104
Chang, Xinquan / Wang, Xin / Liu, Changyuan / Huang, Huang / Zhu, Zhongguo / Wu, Zhishen	Parametric analysis on the flexural behaviour of RC beams strengthened with prestressed FRP laminates	105-120
Cao, Shougang / Duan, Zhongdong / Li, Bo	Parametric study on seismic demand assessment of acceleration-sensitive nonstructural components of RC frames	1441-1458
Hasan, Hayder Alaa / Karim, Hogr / Goaiz, Hussam A. / Cabe, Aidan M. / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Performance evaluation of normal- and high-strength concrete column specimens reinforced longitudinally with different ratios of GFRP bars	1428-1440
Cao, Qi / Xu, Jihang / Wu, Zhimin / Zhang, Lihua	Performance of damaged concrete stub columns strengthened with post-tensioned CFRP under freezing-thawing environment	544-556
Li, Xianhui / Yin, Yao / Zhu, Xiang / Wang, Rui / Li, Tieying / Zhang, Qi / Li, Wenbo	Performance of hollow and aluminum foam-filled multi-cell thin-walled aluminum alloy tubes (6063-T5) under axial impact	1803-1821
Javan, Davoud / Kheyroddin, Ali / Dabiri, Hamed / Esfahani, Mohammad Reza	Performance of RC beam-column joints with hybrid GFRP-steel reinforcement under cyclic and axial loads	1408-1415
Liu, Yikang / Yang, Jian / Xu, Guoji / Wei, Huan / Deng, E.	Performance of UHPC bridge piers subjected to heavy vehicle collisions and probability analysis of damage level	212-232
Aydogan, Mehmet Safa / Alacali, Sema / Arslan, Guray	Prediction of moment redistribution capacity in reinforced concrete beams using gene expression programming	2209-2219
Yao, Yao / Zhang, Huiyun / Zhu, Yan Fei / Liu, Yufei	Progressive collapse resistance of reinforced concrete beam-column connection under fire conditions	1265-1283
Lai, Zhichao / Han, Ying / Yang, Xiaoqiang / Wang, Ying / Li, Qiang	Pull-out resistance of stud groups embedded in concrete	1383-1395
Mahmoudi, Hossein / Bitaraf, Maryam / Salkhordeh, Mojtaba / Soroushian, Siavash	A rapid machine learning-based damage detection algorithm for identifying the extent of damage in concrete shear-wall buildings	482-499
Li, Zhenkun / Lin, Weiwei / Zhang, Youqi	Real-time drive-by bridge damage detection using deep auto-encoder	1167-1181
Di, Wang / Yue, Zhao / Xuelian, Guo / Yangguang, Yuan / Xiaolong, Li	Reliability assessment of parallel wire suspender components considering interlayer corrosion variance	81-92
Haji Mazdarani, Mohammad Javad / Hoseini Vaez, Seyed Rohollah / Hosseini, Pedram / Fathali, Mohammad Ali	Reliability-based layout optimization of concentrically braced in 3D steel frames	1094-1112
Wei, Wan-Li / Chen, Ye-Qing / Wang, Zhen-Qing / Li, Shu-Tao / Huang, Cheng-Long / Gao, Zhen	Research on damage effect of the concrete target under the penetration and explosion integration	1511-1523
Zheng, Tengteng / Zhao, Caiqi / He, Jianghui	Research on fatigue performance of offshore wind turbine blade with basalt fiber bionic plate	466-481
Chen, Mingchao / Zhu, Chundong / Yu, Zhongquan / Ma, Chong	Research on plastic deformation transfer and distribution of large-diameter thin-walled metal ring parts in double-roll pendulum hot rotary forging process	2194-2208
Liang, Yuhan / Chen, Zongping / Liu, Xiang / Liao, Haoyu	Seismic behavior of RC cross-shaped column under combined torsion loading: Experiment and simulation finite element	1652-1667
Zhu, Wang / Xie, Qiang / Liu, Xiao	Seismic failure risk analysis of ± 800 kV coupling filter circuit considering material strength deviation	1566-1578
Zhong, Jian / Zheng, Xianglin / Wu, Qiaofei / Jiang, Linwei / He, Min / Dang, Xinzhi	Seismic fragility and resilience assessment of bridge columns with dual-replaceable composite link beam under near-fault GMs	412-424
Sathurshan, Mathavanayakam / Thamboo, Julian / Mallikarachchi, Chinthaka / Wijesundara, Kushan	Seismic fragility of lightly reinforced concrete school building typologies with different masonry infill configurations	1710-1728
Yang, Jinping / Zhang, Fengfan / Li, Peizhen / Jing, Hang	Seismic performance of column-bearing silo structure with granular materials considering SSI effect	595-606
Fu, Tao / Wang, Kai / Zhu, Zhixin / Ren, Xiaoqian / Li, Yan / Xu, Longwei / Meng, Lingxiao / Sun, Zhonghua	Seismic performance of prefabricated square hollow section piers strengthened by jacketing using UHPC and high-strength steel	449-465
Peker, Kerem / Akgönen, A. İlker	Seismic performance of weak-axis moment connections with reduced panel zone	201-211
Liao, Man / Yang, Yongqing / Luo, Deng / Zhao, Canhui	Seismic response analysis of long-span continuous girder bridge considering fluctuating friction of bearing	2162-2177
Wang, Fuming / Tulamaiti, Yunusijiang / Fang, Hongyuan / Yu, Xiang / Zhou, Chenguang	Seismic response characteristics of polymer anti-seepage wall in earth dam based on earthquake wave motion input method	358-373
Ghaderi Barmi, Cirous / Saghafi, Mohammad Hossein / Golafshar, Ali	Seismic retrofit of severely damaged beam-column RC joints using HPFRCC	1020-1032
Huang, Wei / Deng, Kailai / Huang, Yuanyuan / Zhan, Yulin / Mou, Tingmin	Seismic risk to beam end corner in railway bridges	15-22
Otero, Roi / Lagüela, Susana / Cabaleiro, Manuel / Sousa, Hélder S. / Arias, Pedro	Semi-automatic 3D frame modelling of wooden trusses using indoor point clouds	1743-1753
Cacho-Pérez, M.	Sequential Plastic Method for 2D frames limit analysis	1680-1690
Dai, Jianbo / Wang, Zhiqiang / Wang, Zhaocheng / Wang, Hao / Ma, Jing / Zhao, Zewen	Shake table test and numerical analysis of the seismic response of buried long-distance pipeline under longitudinal non-uniform excitation	1241-1249
Yang, Haixu / Li, Zhuo / Wang, Haibiao / Zhang, Maohua / Ni, Songyuan	Shaking table test study on seismic performance of RC frame structure with NES	153-164
Su, Xiaolong / Zhou, Man / Tanwari, Kamran Anwar	Shear behavior of prismatic and nonprismatic beams with trapezoidal steel web corrugations considering secondary internal force induced by external prestressing	638-647
Abbas, Yassir M.	Shear behavior of ultra-high-performance reinforced concrete beams – Finite element and uncertainty quantification study	2365-2380
Shi, Feng-Wei / Ding, Yang / Zong, Liang / Chen, Yang / Wu, Ying	Shear behaviour of vertical inter-module connection with bolts and shear keys for MSCs	260-281
Sandeep, M. S. / Tiprak, Koravith / Kaewunruen, Sakdirat / Pheinsusom, Phoonsak / Pansuk, Withit	Shear strength prediction of reinforced concrete beams using machine learning	1196-1211
Sui, Yi / Zou, Degao / Chen, Kai	Shock vibration and damage responses of nuclear island subjected to an aircraft crash	1476-1497
Long, Xiaohong / Gui, Shihai / Ma, Yongtao / Turgun, Ahmed / Zhou, Qunlin / Lu, Chunde	Simplified design method of pounding-unseating-prevention device for LRB isolated continuous girder bridge	1777-1789
Saadatkhah, Amir / Reza Chenaghlou, Mohammad / Poursha, Mehdi	A simplified formula for the determination of the fundamental period of mixed structures with vertical combination of different seismic resisting systems	681-693
Zhong, Wen / Song, Yongsheng / Ding, Youliang / Fang, Zhao	A simplified method for fatigue life evaluation of welded joints in OSD considering welding residual stress relaxation	165-176
Al-Rousan, Rajai Z. / Qudaisat, Muneer S.	Single keyed joints behaviour and capacity formulation under direct shear using non-linear finite-element analysis	911-924
An, Renbing / You, Wenlong / Pan, Yi / Fan, Yuanqing	Static and dynamic analyses of traditional Chinese timber columns under horizontal accelerations	37-51
Mashrah, W. A. H. / Chen, Zhihua / Liu, Hongbo / Rima, Boufendassa / Mogalli, Abdullah	Static performance of steel temcor joints subjected to axial tension and compression loads	1113-1133
Liu, Ping / Yue, Ma / Zhe Feng, Shu / Ngamkhanong, Chayut	Structural behaviour of air-inflated beams	1613-1623
Fayed, Sabry / Mansour, Walid	Structural performance of seasand recycled aggregate concrete filled Solid/Hollow aluminum tubular Columns: An experimental work	1323-1340
Bavandi, Mohammad / Amiri, Gholamreza Ghodrati / Rajabi, Elham / Moghadam, Abdolreza S.	Study of the resilience index for steel moment frames with reversible connections	814-828
Zheng, Han / Qiao, Huiyun / Chen, Yu / Yang, Bo / Zhu, Bin / Lai, Lifang	Study on anti-progressive collapse performance of cellular steel frames with different web opening shapes	338-357
Yang, Yanmin / Ge, Zesen / Li, Yongqing / Xiong, Ying / Yuan, Qi	Study on impact resistance of precast light-weight concrete sandwich panels	966-975
Liu, Lei / Zhang, Long / Zhu, Li / Li, Jian / Yang, Yifan / Hao, Lin	Study on mechanical properties of stud connectors in steel-lightweight aggregate concrete composite structures	1072-1085
Qiu, Zhiping / Zhu, Bo	A symplectic homotopy perturbation method for random structural dynamics response analysis based on Birkhoffian systems	1668-1679
Colak, Huseyin / Soyoz, Serdar	Time-dependent seismic performance assessment of RC buildings exposed to corrosion	1134-1147
Montemurro, Marco / Bertolino, Giulia / Panettieri, Enrico	Topology optimisation of architected cellular materials from additive manufacturing: Analysis, design, and experiments	2220-2239
Zhou, Xiang / Liao, Wenyuan / Liu, Dewen	Ultimate bearing capacity of composite beams with reinforced web opening under hogging moment: Practical calculation method	2531-2540
Heinisuo, Markku / Pajunen, Sami / Aspila, Aku	Ultimate failure load analysis of cross-laminated timber panels subjected to in-plane compression	1558-1565
Gholami, Esmail / Afshin, Hassan / Basim, Mohammad Charkhtab / Sharghi, Mohammad	Ultra-high performance recycled steel fiber reinforced concrete segments under the thrust force of TBM jacks and their environmental potentialities	2465-2484
Wu, Tianyu / Qiu, Wenliang / Yao, Guowen / Guo, Zengwei	Vehicle ride comfort analysis on sea-crossing bridges under drift ice load	846-861
Massone, Leonardo M. / Rosa, José / Mesa, Álvaro	Versatile hysteretic model of reinforcing steel bars with buckling	1858-1868
Wang, Zhihao / Wen, Jinlong / Kou, Chen / Huo, Hongyuan / Chen, Aijiu / Fan, Buqiao	Vertical human-structure interaction of a simply-supported steel-glass composite footbridge under both standing and moving pedestrians	1212-1224
Fang, Zhiyuan / Roy, Krishanu / Padiyara, Sujith / Chen, Boshan / Raftery, Gary M. / Lim, James B. P.	Web crippling design of cold-formed stainless steel channels under interior-two-flange loading condition using deep belief network	1967-1990
Harte, Annette M. / Baylor, Gordon / O'Ceallaigh, Conan	Web geometry optimisation of novel latticed LVL-webbed timber I-joists	748-759
Ding, Yang / Ye, Xiao-Wei / Guo, Yong	Wind load assessment with the JPDF of wind speed and direction based on SHM data	2074-2080
Li, Chuangdi / Yang, Xuefeng / Li, Yuxiang / Ge, Xinguang	Wind vibration responses of structure with generalized Maxwell model viscoelastic dampers	425-433

Über diese
Datenseite
IssueID
68694
Veröffentlicht am:
10.12.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Januar 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Januar 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.