Structural Concrete - v. 23, n. 5 (October 2022)

Published:	October 2022

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Yangxi / Yao, Xinyuan / Li, Tong / Deng, Mingke	Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing	2732-2747
Sarkis, Ana I. / Büker, Frank / Sullivan, Timothy J. / Elwood, Kenneth J. / Brunesi, Emanuele / Hogan, Lucas S.	Aspects affecting the nonlinear behavior of precast prestressed hollow‐core units failing in shear	3021-3038
Toufigh, Vahab / Pachideh, Ghasem	Cementitious mortars containing pozzolans under elevated temperatures	3294-3312
Saidani, Messaoud / Olubanwo, Adegoke / Khorami, Morteza	Characteristics of a novel lightweight concrete	3050-3061
Torres‐González, Marta / Mantero, Juan / Hurtado, Santiago / Flores‐Alés, Vicente / Alejandre, Francisco J. / Alducín‐Ochoa, Juan M.	Characterization and radioactive evaluation of the concrete from a radiotherapy bunker	3102-3113
Hao, Meijing / Zheng, Wenzhong / Chang, Wei	Compression behavior of reinforced concrete columns jacketed with multi‐spiral transverse reinforcement	2942-2967
Awan, Abdul Basir / Shaikh, Faiz Uddin Ahmed	Compressive behavior of precast concrete sandwich panels containing recycled tyre crumb rubber core	2786-2802
Thienpont, Thomas / De Corte, Wouter / Van Coile, Ruben / Caspeele, Robby	Compressive membrane action in axially restrained hollow core slabs: Experimental investigation	3007-3020
Bogdanić, Anton / Casucci, Daniele / Ožbolt, Jośko	Concrete edge breakout of anchor channels—On the influence of member thickness and installation in pockets	2803-2819
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Deep learning and machine learning‐based prediction of capillary water absorption of hybrid fiber reinforced self‐compacting concrete	3331-3358
Teodosio, Bertrand / Kristombu Baduge, Kasun Shanaka / Mendis, Priyan	Design of prefabricated footing connection using a coupled hydro‐mechanical finite element model	2669-2695
Zhang, Jinhua / Liu, Xinguo / Ding, Kai / Wu, Zhangyu	Dynamic splitting tensile behaviors of ceramic aggregate concrete: An experimental and mesoscopic study	3267-3283
Kang, Jiacheng / Shen, Dejian / Li, Chengcai / Li, Ming / Wang, Xudong / Hu, Haijiang	Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers	3234-3248
Dong, Fangyuan / Yu, Kequan / Yu, Jiangtao / Wang, Yichao / Liu, Keke	Effects of environmental temperature on the mechanical properties of polyethylene fiber‐engineered cementitious composites	3114-3125
Metelli, Giovanni / Marchina, Egidio / Plizzari, Giovanni A.	Effects of the position of confining transverse links on lap strength	2928-2941
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Estimation of strengths of hybrid FR‐SCC by using deep‐learning and support vector regression models	3313-3330
Yang, Suhang / Xu, Zhifeng / Singh, Amardeep	Evaluation of compressive strength using novel in situ test method	3091-3101
Ci, Junchang / Kong, Lingxu / Ahmed, Mizan / Liang, Qing Quan / Hamoda, Ahmed / Chen, Shicai / Wu, Chunyu	Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns	2748-2769
Fröhlich, Thilo / Lotze, Dieter	Experimental investigation on the fatigue design of anchor channels	2867-2877
Dey, Subhashish / Praveen Kumar, Vemu Venkata / Manoj, Akula Venkata	An experimental study on strength and durability characteristics of self‐curing self‐compacting concrete	3169-3198
Dal Lago, Bruno / Flessati, Luca / Marveggio, Pietro / Martinelli, Paolo / Fraraccio, Giancarlo / Prisco, Claudio / Prisco, Marco	Experimental tests on shallow foundations of onshore wind turbine towers	2986-3006
Lei, Bo / Qi, Taiyue / Li, Yan / Qin, Shaojie	An improved Lubliner strength model based on Ottosen failure criterion for concrete under multiaxial stress state	3199-3220
Garcia, Roberto / Alejandro, Pérez Caldentey	Influence of casting position on cracking behavior of reinforced concrete elements and evaluation of latest proposal for EN‐1992 and MC2020: Experimental study	2910-2927
Li, Yanlong / Li, Weimei / Wen, Lifeng / Li, Yang / Li, Kangping / Zhang, Ye	The longitudinal response of prestressed cylinder concrete pipe with bell–spigot joints subjected to normal fault	2852-2866
Amirkhani, Saeed / Lezgy‐Nazargah, Mojtaba	Nonlinear finite element analysis of reinforced concrete columns: Evaluation of different modeling approaches for considering stirrup confinement effects	2820-2836
Le, Tuan Trung / Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Huynh, Phat / Ha, Ngoc San	Numerical analysis of square concrete‐filled double‐skin tubular columns with outer stainless‐steel tube	2968-2985
Gupta, Tanuja / Chakradhara Rao, Meesala	Prediction of compressive strength of geopolymer concrete using machine learning techniques	3073-3090
Liu, Xun / Feng, Kun / He, Chuan / Zhao, Lixiang	Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons	2837-2851
Putter, Arjen / Hendriks, Max A. N. / Rots, Jan G. / Yang, Yuguang / Engen, Morten / Bos, Ab A.	Quantification of the resistance modeling uncertainty of 19 alternative 2D nonlinear finite element approaches benchmarked against 101 experiments on reinforced concrete beams	2895-2909
Li, Chenzhi	Relationship between water absorption and porosity in concrete with limestone powder addition	3284-3293
Singh, Manpreet / Yadav, Saurav / Hussain, Shaik / Arora, Prateek / Srivastava, Anshuman	Reliability‐based mix design of marble dust incorporated concrete and its assessment using the concept of performance index	3249-3266
Wu, Qingpei / Gong, Fuyuan / Zhi, Dian / Zhao, Yuxi	Removing attached mortar from recycled aggregate by the combined freeze–thaw cycles and high‐temperature drying	3126-3139
Zou, Yu / Xu, Dong	Shear behavior of steel keyed joints in precast concrete segmental bridges under direct shear loading	2710-2731
Scott, Richard / Whittle, Robin / Jones, Tony	Shrinkage curvature of cracked reinforced concrete sections under load	3154-3168
Galeote, Eduardo / Picazo, Álvaro / Alberti, Marcos G. / de la Fuente, Albert / Enfedaque, Alejandro / Gálvez, Jaime C. / Aguado, Antonio	Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: Performance‐based equations	3140-3153
Pomares Torres, Juan Carlos / González Sánchez, Antonio / Pereiro‐Barceló, Javier / Saura Gómez, Pascual / Torres, Benjamín	Strength capacity of prismatic specimens for masonry constructions made of concrete voussoirs	2878-2894
Ravathi, Mohanadhas Chandrika / Chithra, Rethnasamy	Strength optimization of recycled fine aggregate self‐curing concrete using Taguchi design	3062-3072
Löschmann, Jens / Mark, Peter	Strengthening of beams or slabs using temperature induction	2770-2785
Song, Shushuang / Niu, Yanning / Zhong, Xiumei	Study on dynamic mechanical properties of carbon nanotubes reinforced concrete subjected to freeze–thaw cycles	3221-3233
Mu, Zhongcheng / Hu, Yile / Wang, Wei / Yi, Ji Yuan / Cheng, Xuebin / Wu, Xiaofeng	Study on the perforation process of concrete targets against the impact by nondeforming projectiles	2654-2668
Cairns, John	Top cast effect: Influence of bond length on splitting mode failure	2696-2709
Sun, Ryan W. / Fanourakis, George C.	The validation of elastic modulus models: Code models and their modified versions	3039-3049

About this
data sheet
IssueID
68598
Published on:
10/12/2022
Last updated on:
10/12/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structural Concrete - v. 23, n. 5 (October 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structural Concrete - v. 23, n. 5 (October 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.