Structural Concrete - v. 23, n. 5 (Oktober 2022)

Erschienen:	Oktober 2022

Autor(en)	Titel	Seite(n)
Zhang, Yangxi / Yao, Xinyuan / Li, Tong / Deng, Mingke	Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing	2732-2747
Sarkis, Ana I. / Büker, Frank / Sullivan, Timothy J. / Elwood, Kenneth J. / Brunesi, Emanuele / Hogan, Lucas S.	Aspects affecting the nonlinear behavior of precast prestressed hollow‐core units failing in shear	3021-3038
Toufigh, Vahab / Pachideh, Ghasem	Cementitious mortars containing pozzolans under elevated temperatures	3294-3312
Saidani, Messaoud / Olubanwo, Adegoke / Khorami, Morteza	Characteristics of a novel lightweight concrete	3050-3061
Torres‐González, Marta / Mantero, Juan / Hurtado, Santiago / Flores‐Alés, Vicente / Alejandre, Francisco J. / Alducín‐Ochoa, Juan M.	Characterization and radioactive evaluation of the concrete from a radiotherapy bunker	3102-3113
Hao, Meijing / Zheng, Wenzhong / Chang, Wei	Compression behavior of reinforced concrete columns jacketed with multi‐spiral transverse reinforcement	2942-2967
Awan, Abdul Basir / Shaikh, Faiz Uddin Ahmed	Compressive behavior of precast concrete sandwich panels containing recycled tyre crumb rubber core	2786-2802
Thienpont, Thomas / De Corte, Wouter / Van Coile, Ruben / Caspeele, Robby	Compressive membrane action in axially restrained hollow core slabs: Experimental investigation	3007-3020
Bogdanić, Anton / Casucci, Daniele / Ožbolt, Jośko	Concrete edge breakout of anchor channels—On the influence of member thickness and installation in pockets	2803-2819
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Deep learning and machine learning‐based prediction of capillary water absorption of hybrid fiber reinforced self‐compacting concrete	3331-3358
Teodosio, Bertrand / Kristombu Baduge, Kasun Shanaka / Mendis, Priyan	Design of prefabricated footing connection using a coupled hydro‐mechanical finite element model	2669-2695
Zhang, Jinhua / Liu, Xinguo / Ding, Kai / Wu, Zhangyu	Dynamic splitting tensile behaviors of ceramic aggregate concrete: An experimental and mesoscopic study	3267-3283
Kang, Jiacheng / Shen, Dejian / Li, Chengcai / Li, Ming / Wang, Xudong / Hu, Haijiang	Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers	3234-3248
Dong, Fangyuan / Yu, Kequan / Yu, Jiangtao / Wang, Yichao / Liu, Keke	Effects of environmental temperature on the mechanical properties of polyethylene fiber‐engineered cementitious composites	3114-3125
Metelli, Giovanni / Marchina, Egidio / Plizzari, Giovanni A.	Effects of the position of confining transverse links on lap strength	2928-2941
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Estimation of strengths of hybrid FR‐SCC by using deep‐learning and support vector regression models	3313-3330
Yang, Suhang / Xu, Zhifeng / Singh, Amardeep	Evaluation of compressive strength using novel in situ test method	3091-3101
Ci, Junchang / Kong, Lingxu / Ahmed, Mizan / Liang, Qing Quan / Hamoda, Ahmed / Chen, Shicai / Wu, Chunyu	Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns	2748-2769
Fröhlich, Thilo / Lotze, Dieter	Experimental investigation on the fatigue design of anchor channels	2867-2877
Dey, Subhashish / Praveen Kumar, Vemu Venkata / Manoj, Akula Venkata	An experimental study on strength and durability characteristics of self‐curing self‐compacting concrete	3169-3198
Dal Lago, Bruno / Flessati, Luca / Marveggio, Pietro / Martinelli, Paolo / Fraraccio, Giancarlo / Prisco, Claudio / Prisco, Marco	Experimental tests on shallow foundations of onshore wind turbine towers	2986-3006
Lei, Bo / Qi, Taiyue / Li, Yan / Qin, Shaojie	An improved Lubliner strength model based on Ottosen failure criterion for concrete under multiaxial stress state	3199-3220
Garcia, Roberto / Alejandro, Pérez Caldentey	Influence of casting position on cracking behavior of reinforced concrete elements and evaluation of latest proposal for EN‐1992 and MC2020: Experimental study	2910-2927
Li, Yanlong / Li, Weimei / Wen, Lifeng / Li, Yang / Li, Kangping / Zhang, Ye	The longitudinal response of prestressed cylinder concrete pipe with bell–spigot joints subjected to normal fault	2852-2866
Amirkhani, Saeed / Lezgy‐Nazargah, Mojtaba	Nonlinear finite element analysis of reinforced concrete columns: Evaluation of different modeling approaches for considering stirrup confinement effects	2820-2836
Le, Tuan Trung / Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Huynh, Phat / Ha, Ngoc San	Numerical analysis of square concrete‐filled double‐skin tubular columns with outer stainless‐steel tube	2968-2985
Gupta, Tanuja / Chakradhara Rao, Meesala	Prediction of compressive strength of geopolymer concrete using machine learning techniques	3073-3090
Liu, Xun / Feng, Kun / He, Chuan / Zhao, Lixiang	Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons	2837-2851
Putter, Arjen / Hendriks, Max A. N. / Rots, Jan G. / Yang, Yuguang / Engen, Morten / Bos, Ab A.	Quantification of the resistance modeling uncertainty of 19 alternative 2D nonlinear finite element approaches benchmarked against 101 experiments on reinforced concrete beams	2895-2909
Li, Chenzhi	Relationship between water absorption and porosity in concrete with limestone powder addition	3284-3293
Singh, Manpreet / Yadav, Saurav / Hussain, Shaik / Arora, Prateek / Srivastava, Anshuman	Reliability‐based mix design of marble dust incorporated concrete and its assessment using the concept of performance index	3249-3266
Wu, Qingpei / Gong, Fuyuan / Zhi, Dian / Zhao, Yuxi	Removing attached mortar from recycled aggregate by the combined freeze–thaw cycles and high‐temperature drying	3126-3139
Zou, Yu / Xu, Dong	Shear behavior of steel keyed joints in precast concrete segmental bridges under direct shear loading	2710-2731
Scott, Richard / Whittle, Robin / Jones, Tony	Shrinkage curvature of cracked reinforced concrete sections under load	3154-3168
Galeote, Eduardo / Picazo, Álvaro / Alberti, Marcos G. / de la Fuente, Albert / Enfedaque, Alejandro / Gálvez, Jaime C. / Aguado, Antonio	Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: Performance‐based equations	3140-3153
Pomares Torres, Juan Carlos / González Sánchez, Antonio / Pereiro‐Barceló, Javier / Saura Gómez, Pascual / Torres, Benjamín	Strength capacity of prismatic specimens for masonry constructions made of concrete voussoirs	2878-2894
Ravathi, Mohanadhas Chandrika / Chithra, Rethnasamy	Strength optimization of recycled fine aggregate self‐curing concrete using Taguchi design	3062-3072
Löschmann, Jens / Mark, Peter	Strengthening of beams or slabs using temperature induction	2770-2785
Song, Shushuang / Niu, Yanning / Zhong, Xiumei	Study on dynamic mechanical properties of carbon nanotubes reinforced concrete subjected to freeze–thaw cycles	3221-3233
Mu, Zhongcheng / Hu, Yile / Wang, Wei / Yi, Ji Yuan / Cheng, Xuebin / Wu, Xiaofeng	Study on the perforation process of concrete targets against the impact by nondeforming projectiles	2654-2668
Cairns, John	Top cast effect: Influence of bond length on splitting mode failure	2696-2709
Sun, Ryan W. / Fanourakis, George C.	The validation of elastic modulus models: Code models and their modified versions	3039-3049

Autor(en)

Titel

Seite(n)

Zhang, Yangxi / Yao, Xinyuan / Li, Tong / Deng, Mingke

Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing

2732-2747

Sarkis, Ana I. / Büker, Frank / Sullivan, Timothy J. / Elwood, Kenneth J. / Brunesi, Emanuele / Hogan, Lucas S.

Aspects affecting the nonlinear behavior of precast prestressed hollow‐core units failing in shear

3021-3038

Toufigh, Vahab / Pachideh, Ghasem

Cementitious mortars containing pozzolans under elevated temperatures

3294-3312

Saidani, Messaoud / Olubanwo, Adegoke / Khorami, Morteza

Characteristics of a novel lightweight concrete

3050-3061

Torres‐González, Marta / Mantero, Juan / Hurtado, Santiago / Flores‐Alés, Vicente / Alejandre, Francisco J. / Alducín‐Ochoa, Juan M.

Characterization and radioactive evaluation of the concrete from a radiotherapy bunker

3102-3113

Hao, Meijing / Zheng, Wenzhong / Chang, Wei

Compression behavior of reinforced concrete columns jacketed with multi‐spiral transverse reinforcement

2942-2967

Awan, Abdul Basir / Shaikh, Faiz Uddin Ahmed

Compressive behavior of precast concrete sandwich panels containing recycled tyre crumb rubber core

2786-2802

Thienpont, Thomas / De Corte, Wouter / Van Coile, Ruben / Caspeele, Robby

Compressive membrane action in axially restrained hollow core slabs: Experimental investigation

3007-3020

Bogdanić, Anton / Casucci, Daniele / Ožbolt, Jośko

Concrete edge breakout of anchor channels—On the influence of member thickness and installation in pockets

2803-2819

Kina, Ceren / Turk, Kazim / Tanyildizi, Harun

Deep learning and machine learning‐based prediction of capillary water absorption of hybrid fiber reinforced self‐compacting concrete

3331-3358

Teodosio, Bertrand / Kristombu Baduge, Kasun Shanaka / Mendis, Priyan

Design of prefabricated footing connection using a coupled hydro‐mechanical finite element model

2669-2695

Zhang, Jinhua / Liu, Xinguo / Ding, Kai / Wu, Zhangyu

Dynamic splitting tensile behaviors of ceramic aggregate concrete: An experimental and mesoscopic study

3267-3283

Kang, Jiacheng / Shen, Dejian / Li, Chengcai / Li, Ming / Wang, Xudong / Hu, Haijiang

Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers

3234-3248

Dong, Fangyuan / Yu, Kequan / Yu, Jiangtao / Wang, Yichao / Liu, Keke

Effects of environmental temperature on the mechanical properties of polyethylene fiber‐engineered cementitious composites

3114-3125

Metelli, Giovanni / Marchina, Egidio / Plizzari, Giovanni A.

Effects of the position of confining transverse links on lap strength

2928-2941

Kina, Ceren / Turk, Kazim / Tanyildizi, Harun

Estimation of strengths of hybrid FR‐SCC by using deep‐learning and support vector regression models

3313-3330

Yang, Suhang / Xu, Zhifeng / Singh, Amardeep

Evaluation of compressive strength using novel in situ test method

3091-3101

Ci, Junchang / Kong, Lingxu / Ahmed, Mizan / Liang, Qing Quan / Hamoda, Ahmed / Chen, Shicai / Wu, Chunyu

Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns

2748-2769

Fröhlich, Thilo / Lotze, Dieter

Experimental investigation on the fatigue design of anchor channels

2867-2877

Dey, Subhashish / Praveen Kumar, Vemu Venkata / Manoj, Akula Venkata

An experimental study on strength and durability characteristics of self‐curing self‐compacting concrete

3169-3198

Dal Lago, Bruno / Flessati, Luca / Marveggio, Pietro / Martinelli, Paolo / Fraraccio, Giancarlo / Prisco, Claudio / Prisco, Marco

Experimental tests on shallow foundations of onshore wind turbine towers

2986-3006

Lei, Bo / Qi, Taiyue / Li, Yan / Qin, Shaojie

An improved Lubliner strength model based on Ottosen failure criterion for concrete under multiaxial stress state

3199-3220

Garcia, Roberto / Alejandro, Pérez Caldentey

Influence of casting position on cracking behavior of reinforced concrete elements and evaluation of latest proposal for EN‐1992 and MC2020: Experimental study

2910-2927

Li, Yanlong / Li, Weimei / Wen, Lifeng / Li, Yang / Li, Kangping / Zhang, Ye

The longitudinal response of prestressed cylinder concrete pipe with bell–spigot joints subjected to normal fault

2852-2866

Amirkhani, Saeed / Lezgy‐Nazargah, Mojtaba

Nonlinear finite element analysis of reinforced concrete columns: Evaluation of different modeling approaches for considering stirrup confinement effects

2820-2836

Le, Tuan Trung / Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Huynh, Phat / Ha, Ngoc San

Numerical analysis of square concrete‐filled double‐skin tubular columns with outer stainless‐steel tube

2968-2985

Gupta, Tanuja / Chakradhara Rao, Meesala

Prediction of compressive strength of geopolymer concrete using machine learning techniques

3073-3090

Liu, Xun / Feng, Kun / He, Chuan / Zhao, Lixiang

Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons

2837-2851

Putter, Arjen / Hendriks, Max A. N. / Rots, Jan G. / Yang, Yuguang / Engen, Morten / Bos, Ab A.

Quantification of the resistance modeling uncertainty of 19 alternative 2D nonlinear finite element approaches benchmarked against 101 experiments on reinforced concrete beams

2895-2909

Li, Chenzhi

Relationship between water absorption and porosity in concrete with limestone powder addition

3284-3293

Singh, Manpreet / Yadav, Saurav / Hussain, Shaik / Arora, Prateek / Srivastava, Anshuman

Reliability‐based mix design of marble dust incorporated concrete and its assessment using the concept of performance index

3249-3266

Wu, Qingpei / Gong, Fuyuan / Zhi, Dian / Zhao, Yuxi

Removing attached mortar from recycled aggregate by the combined freeze–thaw cycles and high‐temperature drying

3126-3139

Zou, Yu / Xu, Dong

Shear behavior of steel keyed joints in precast concrete segmental bridges under direct shear loading

2710-2731

Scott, Richard / Whittle, Robin / Jones, Tony

Shrinkage curvature of cracked reinforced concrete sections under load

3154-3168

Galeote, Eduardo / Picazo, Álvaro / Alberti, Marcos G. / de la Fuente, Albert / Enfedaque, Alejandro / Gálvez, Jaime C. / Aguado, Antonio

Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: Performance‐based equations

3140-3153

Pomares Torres, Juan Carlos / González Sánchez, Antonio / Pereiro‐Barceló, Javier / Saura Gómez, Pascual / Torres, Benjamín

Strength capacity of prismatic specimens for masonry constructions made of concrete voussoirs

2878-2894

Ravathi, Mohanadhas Chandrika / Chithra, Rethnasamy

Strength optimization of recycled fine aggregate self‐curing concrete using Taguchi design

3062-3072

Löschmann, Jens / Mark, Peter

Strengthening of beams or slabs using temperature induction

2770-2785

Song, Shushuang / Niu, Yanning / Zhong, Xiumei

Study on dynamic mechanical properties of carbon nanotubes reinforced concrete subjected to freeze–thaw cycles

3221-3233

Mu, Zhongcheng / Hu, Yile / Wang, Wei / Yi, Ji Yuan / Cheng, Xuebin / Wu, Xiaofeng

Study on the perforation process of concrete targets against the impact by nondeforming projectiles

2654-2668

Cairns, John

Top cast effect: Influence of bond length on splitting mode failure

2696-2709

Sun, Ryan W. / Fanourakis, George C.

The validation of elastic modulus models: Code models and their modified versions

3039-3049

Anzeige

Structural Concrete - v. 23, n. 5 (Oktober 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structural Concrete - v. 23, n. 5 (Oktober 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.