Structural Concrete - v. 23, n. 5 (octobre 2022)

Publié:	octobre 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, Yangxi / Yao, Xinyuan / Li, Tong / Deng, Mingke	Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing	2732-2747
Sarkis, Ana I. / Büker, Frank / Sullivan, Timothy J. / Elwood, Kenneth J. / Brunesi, Emanuele / Hogan, Lucas S.	Aspects affecting the nonlinear behavior of precast prestressed hollow‐core units failing in shear	3021-3038
Toufigh, Vahab / Pachideh, Ghasem	Cementitious mortars containing pozzolans under elevated temperatures	3294-3312
Saidani, Messaoud / Olubanwo, Adegoke / Khorami, Morteza	Characteristics of a novel lightweight concrete	3050-3061
Torres‐González, Marta / Mantero, Juan / Hurtado, Santiago / Flores‐Alés, Vicente / Alejandre, Francisco J. / Alducín‐Ochoa, Juan M.	Characterization and radioactive evaluation of the concrete from a radiotherapy bunker	3102-3113
Hao, Meijing / Zheng, Wenzhong / Chang, Wei	Compression behavior of reinforced concrete columns jacketed with multi‐spiral transverse reinforcement	2942-2967
Awan, Abdul Basir / Shaikh, Faiz Uddin Ahmed	Compressive behavior of precast concrete sandwich panels containing recycled tyre crumb rubber core	2786-2802
Thienpont, Thomas / De Corte, Wouter / Van Coile, Ruben / Caspeele, Robby	Compressive membrane action in axially restrained hollow core slabs: Experimental investigation	3007-3020
Bogdanić, Anton / Casucci, Daniele / Ožbolt, Jośko	Concrete edge breakout of anchor channels—On the influence of member thickness and installation in pockets	2803-2819
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Deep learning and machine learning‐based prediction of capillary water absorption of hybrid fiber reinforced self‐compacting concrete	3331-3358
Teodosio, Bertrand / Kristombu Baduge, Kasun Shanaka / Mendis, Priyan	Design of prefabricated footing connection using a coupled hydro‐mechanical finite element model	2669-2695
Zhang, Jinhua / Liu, Xinguo / Ding, Kai / Wu, Zhangyu	Dynamic splitting tensile behaviors of ceramic aggregate concrete: An experimental and mesoscopic study	3267-3283
Kang, Jiacheng / Shen, Dejian / Li, Chengcai / Li, Ming / Wang, Xudong / Hu, Haijiang	Effect of water‐to‐cement ratio on internal relative humidity and autogenous shrinkage of early‐age concrete internally cured by superabsorbent polymers	3234-3248
Dong, Fangyuan / Yu, Kequan / Yu, Jiangtao / Wang, Yichao / Liu, Keke	Effects of environmental temperature on the mechanical properties of polyethylene fiber‐engineered cementitious composites	3114-3125
Metelli, Giovanni / Marchina, Egidio / Plizzari, Giovanni A.	Effects of the position of confining transverse links on lap strength	2928-2941
Kina, Ceren / Turk, Kazim / Tanyildizi, Harun	Estimation of strengths of hybrid FR‐SCC by using deep‐learning and support vector regression models	3313-3330
Yang, Suhang / Xu, Zhifeng / Singh, Amardeep	Evaluation of compressive strength using novel in situ test method	3091-3101
Ci, Junchang / Kong, Lingxu / Ahmed, Mizan / Liang, Qing Quan / Hamoda, Ahmed / Chen, Shicai / Wu, Chunyu	Experimental and numerical studies of axially loaded square concrete‐encased concrete‐filled large‐diameter steel tubular short columns	2748-2769
Fröhlich, Thilo / Lotze, Dieter	Experimental investigation on the fatigue design of anchor channels	2867-2877
Dey, Subhashish / Praveen Kumar, Vemu Venkata / Manoj, Akula Venkata	An experimental study on strength and durability characteristics of self‐curing self‐compacting concrete	3169-3198
Dal Lago, Bruno / Flessati, Luca / Marveggio, Pietro / Martinelli, Paolo / Fraraccio, Giancarlo / Prisco, Claudio / Prisco, Marco	Experimental tests on shallow foundations of onshore wind turbine towers	2986-3006
Lei, Bo / Qi, Taiyue / Li, Yan / Qin, Shaojie	An improved Lubliner strength model based on Ottosen failure criterion for concrete under multiaxial stress state	3199-3220
Garcia, Roberto / Alejandro, Pérez Caldentey	Influence of casting position on cracking behavior of reinforced concrete elements and evaluation of latest proposal for EN‐1992 and MC2020: Experimental study	2910-2927
Li, Yanlong / Li, Weimei / Wen, Lifeng / Li, Yang / Li, Kangping / Zhang, Ye	The longitudinal response of prestressed cylinder concrete pipe with bell–spigot joints subjected to normal fault	2852-2866
Amirkhani, Saeed / Lezgy‐Nazargah, Mojtaba	Nonlinear finite element analysis of reinforced concrete columns: Evaluation of different modeling approaches for considering stirrup confinement effects	2820-2836
Le, Tuan Trung / Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Huynh, Phat / Ha, Ngoc San	Numerical analysis of square concrete‐filled double‐skin tubular columns with outer stainless‐steel tube	2968-2985
Gupta, Tanuja / Chakradhara Rao, Meesala	Prediction of compressive strength of geopolymer concrete using machine learning techniques	3073-3090
Liu, Xun / Feng, Kun / He, Chuan / Zhao, Lixiang	Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons	2837-2851
Putter, Arjen / Hendriks, Max A. N. / Rots, Jan G. / Yang, Yuguang / Engen, Morten / Bos, Ab A.	Quantification of the resistance modeling uncertainty of 19 alternative 2D nonlinear finite element approaches benchmarked against 101 experiments on reinforced concrete beams	2895-2909
Li, Chenzhi	Relationship between water absorption and porosity in concrete with limestone powder addition	3284-3293
Singh, Manpreet / Yadav, Saurav / Hussain, Shaik / Arora, Prateek / Srivastava, Anshuman	Reliability‐based mix design of marble dust incorporated concrete and its assessment using the concept of performance index	3249-3266
Wu, Qingpei / Gong, Fuyuan / Zhi, Dian / Zhao, Yuxi	Removing attached mortar from recycled aggregate by the combined freeze–thaw cycles and high‐temperature drying	3126-3139
Zou, Yu / Xu, Dong	Shear behavior of steel keyed joints in precast concrete segmental bridges under direct shear loading	2710-2731
Scott, Richard / Whittle, Robin / Jones, Tony	Shrinkage curvature of cracked reinforced concrete sections under load	3154-3168
Galeote, Eduardo / Picazo, Álvaro / Alberti, Marcos G. / de la Fuente, Albert / Enfedaque, Alejandro / Gálvez, Jaime C. / Aguado, Antonio	Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: Performance‐based equations	3140-3153
Pomares Torres, Juan Carlos / González Sánchez, Antonio / Pereiro‐Barceló, Javier / Saura Gómez, Pascual / Torres, Benjamín	Strength capacity of prismatic specimens for masonry constructions made of concrete voussoirs	2878-2894
Ravathi, Mohanadhas Chandrika / Chithra, Rethnasamy	Strength optimization of recycled fine aggregate self‐curing concrete using Taguchi design	3062-3072
Löschmann, Jens / Mark, Peter	Strengthening of beams or slabs using temperature induction	2770-2785
Song, Shushuang / Niu, Yanning / Zhong, Xiumei	Study on dynamic mechanical properties of carbon nanotubes reinforced concrete subjected to freeze–thaw cycles	3221-3233
Mu, Zhongcheng / Hu, Yile / Wang, Wei / Yi, Ji Yuan / Cheng, Xuebin / Wu, Xiaofeng	Study on the perforation process of concrete targets against the impact by nondeforming projectiles	2654-2668
Cairns, John	Top cast effect: Influence of bond length on splitting mode failure	2696-2709
Sun, Ryan W. / Fanourakis, George C.	The validation of elastic modulus models: Code models and their modified versions	3039-3049

Informations
sur cette fiche
IssueID
68598
Publié(e) le:
10.12.2022
Modifié(e) le:
10.12.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structural Concrete - v. 23, n. 5 (octobre 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structural Concrete - v. 23, n. 5 (octobre 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.