Structural Concrete -

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Jinhao / Li, Zhudan / Cai, Jianguo / Jin, Baohong	Axial compression performance of slurry‐wrapping recycled aggregate concrete‐filled steel tube short columns under freeze–thaw cycles
Biook Aghazadeh, Arian / Mirvalad, Sajjad	Accelerated external sulfate attack: Improved laboratory methods, considering physical and chemical processes
Wang, Bo / Liu, Gejia / Zhang, Zhen / Wang, Zicheng / Han, Yufei	Analysis on flexural capacity of basalt textile grid‐reinforced ECC strengthening RC beam
Amjad, Rizwan / Zhang, Yumeng / Liu, Xian	An analytical solution for shear bearing capacity of circumferential joints of precast concrete segmental tunnel linings considering dowel action
Cairns, John / Feldman, Lisa R. / Palmisano, Fabrizio	Anchorage and lap capacity of plain surface and square twisted bars in existing R.C. Structures: A comprehensive approach
Veyhe, Torkil / Jørgensen, Henrik Brøner / Hansen, Søren Gustenhoff	Anchorage capacity of bent looped wire ropes in precast concrete wall elements for T‐ and L‐ connections
Mosquera, Carlos H. / Acosta, Melissa P. / Rodríguez, William A. / Mejía‐España, Diego A. / Torres, Jonhatan R. / Martinez, Daniela M. / Abellán‐García, Joaquín	ANN‐based analysis of the effect of SCM on recycled aggregate concrete
Chiorino, Cristiana / Chiorino, Mario Alberto / Nervi, Elisabetta Margiotta	The art and science of building by Pier Luigi Nervi: A modern vision and a heritage to be preserved
Xu, Bin / Wu, Zirao / Casas, Joan R. / Dan, Danhui	Automatic assessment of the fatigue life of cables of cable‐stayed bridges by on‐line monitoring
Wang, Jiehui / Ueda, Tamon	Automatic damage detection and segmentation using deep learning algorithms in reinforced concrete structure inspections
Ahmad, Habil / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Axial and bending behavior of GFRP bar‐reinforced hollow‐core polypropylene fiber concrete columns
Wu, Jing‐hui / Shang, Xing‐yan / Zhang, Shi / Yan, Kai / Xu, Fang‐zheng	Axial compressive behavior of fire‐damaged RC column strengthened with ECC‐CFRP grid
Wang, Qiang / Liang, Xu‐hua / Liu, Xin / Guo, Shi‐ping / Lu, Chun‐Ling	Axial compressive performance of RC columns strengthened with prestressed CFRP fabric and UHPC jacket with spiral stirrups
Martens, Constantijn / Botte, Wouter / Caspeele, Robby / Verstrynge, Els	Bayesian updating of relationships between crack width and corrosion level in reinforced concrete based on a large set of experimental data
Wang, Tan / Li, Liwei / Dou, Lijun / Huang, Qian / Zhou, Zhijie / Cao, Yibo / Yang, Fan / Zhu, Zhu	Behavior of GFRP reinforced concrete columns confined with inner steel spirals
Xue, Wen / Wang, Jing‐Zong / Zheng, Yi‐Lin	Bending behavior of segmental precast diaphragm walls using bolted sleeve joints
Mohamed, Ali Abdelrahim / Ali, Osama / Metwally, Ibrahim M.	Blast performance of RC columns with different levels of concrete grades and reinforcing ratios
Barros, Joaquim A. O. / Sanz, Beatriz / Filho, Marcílio / Kabele, Petr / Yu, Rena C. / Meschke, Günther / Planas, Jaime / Cunha, Vitor / Neu, Gerrit E. / Caggiano, Antonio / Gouveia, Ventura / Ozyurt, Nilufer / Poveda, Elisa / Bos, Ab Van den / Červenka, Jan / Gal, Erez / Rossi, Pierre / Dias‐da‐Costa, Daniel / Juhasz, Peter K. / Cendón, David / Ruiz, Gonzalo	Blind competition on the numerical simulation of slabs reinforced with conventional flexural reinforcement and fibers subjected to punching loading configuration
Li, Weitao / Li, Shan / Lu, Yiyan / Liu, Zhenzhen	Bond properties of steel bar with engineered geopolymer composites under monotonic load
Liu, Qiang / Song, Yuanqi / Wang, Xing / Zhu, Yong / Wang, Dayang	Bond‐slip behavior between polypropylene fiber concrete and corroded reinforcement
Zhou, Qingsong / Lu, Caifeng / Lu, Chunhao / Chen, Chong / Guo, Zongkai / Li, Yanhong / Yang, Sheng / Wang, Wei	Chloride transport through the interface in repaired marine concrete systems in a cracked state
Yuan, Aimin / Miao, Xinge / Chen, Qi / Wang, Xi / Kong, Hu / Wang, Keqin / Wang, Jingquan	Comparative shear performance of ultra high‐performance concrete filled pocket and longitudinal trough connector of PC composite girder with full‐depth deck
Fathalla, Eissa / Mihaylov, Boyan	Comprehensive approach for examining shear‐critical RC walls using detailed experimental measurements
Barbhuiya, Salim / Das, Bibhuti Bhusan / Norman, Paul / Qureshi, Tanvir	A comprehensive review of radiation shielding concrete: Properties, design, evaluation, and applications
Liu, Qiuyu / Xue, Gang / Dong, Wei / Li, Jingjun	Compressive behavior of steel slag fine aggregate concrete under impact loading
Güneyisi, Esra Mete / İpek, Süleyman / Güneyisi, Erhan	Compressive behavior of sustainable rubberized concrete‐filled steel tube columns having various recycled tire rubber aggregate contents and developing a predictive design model
Huang, Junguang / Feng, Chun / Wang, Xueya / Zhang, Yiming	Continuous–discontinuous element method for simulating three‐dimensional reinforced concrete structures
Carvalho, Geovana Izabel de Macedo / Ferreira, Marcelo de Araújo / Catoia, Bruna	Contribution to the design of prestressed hollow core purlins without transverse reinforcement
Vandecruys, Eline / Martens, Constantijn / Van Steen, Charlotte / Lombaert, Geert / Verstrynge, Els	Corrosion level estimation in reinforced concrete beams by acoustic emission sensing and selective crack measurements
Bisht, Mohit / Iqbal, M. A.	Damage assessment of plain, fiber, and reinforced concrete targets against low velocity long rod rigid projectile
Strauss, A.	Data informed performance assessment and structural health monitoring for existing and historical concrete structures
Malladi, Bhanu Prakash / Venkateshwaran, Akshay / Nayaka, R. Ramesh	Design and economic implications of using steel fibers in elevated slabs of multi‐story buildings
Hossain, Md Mamun / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Design of alkali‐activated reactive powder concrete incorporating reactive MgO
Tawil, Dana / Martín‐Pérez, Beatriz / Sanchez, Leandro F. M. / Noël, Martin	Detection of corrosion effects on prestressed concrete bridge deck slabs from the champlain bridge through non‐destructive testing techniques
Sträter, Noah / Clauß, Felix / Ahrens, Mark Alexander / Mark, Peter	Detection of tendon breaks in prestressed concrete structures using coda wave interferometry
Hartwig, S. / Kang, C. / Fürll, F. / Klein, F. / Classen, M. / Marx, S.	Development of a new analytical model for circular concrete ring segments with dry joints under combined effects
White, Callum / Forsdyke, Jessica / Harrison, Mark / Desnerck, Pieter / Lees, Janet M.	Digital threads for sustainable concrete: A prototype traceability system
Wimmer, Johannes / Braml, Thomas	Digital twins for engineering structures—An Industry 4.0 perspective
Alsomiri, Mujahed / Liu, Zhao / Wang, Tao / Meng, Jie	Ductility‐oriented design of UHPC T‐beams: Mechanical model and design recommendations
Li, Yuan / Lin, Qutong / Liu, Jianyu	Dynamic response and blast resistance of I‐shaped steel‐concrete composite beam under explosive loading
Lovra, Éva / Bereczki, Zoltán	Early use of the reinforced concrete in the architecture of the Historicism in Austria–Hungary
Menga, Antonia / Torrenti, Jean‐Michel / Kanstad, Terje / Klausen, Anja Birgitta Estensen	Early‐age cracking due to restraint: Laboratory and field investigations on the predictive capacity of the simplified method in Annex D of the future EC2
Aligolnia, Hamed / Yousefpour, Hossein	Effect of alkali silica reaction on pretensioned concrete bridge girders
Tanyildizi, Harun / Bulut, Metehan	The effect of carbon nanotube on self‐healing properties of engineered cementitious composites subjected to high temperatures
Chen, Haiming / Zhang, Yadong / Chen, Jie / Qin, Ziguang / Wu, Peng	Effect of fly ash and gypsum on drying shrinkage and mechanical properties of one‐part alkali‐activated slag mortar
Toska, Klajdi / Faleschini, Flora / Beaucour, Anne‐Lise / Pellegrino, Carlo / Noumowé, Albert	Effect of high temperature on FRCM‐confined concrete
Fan, Qichang / Zheng, Yuanyuan / He, Chunhui / Meng, Dan / Guo, Qun / Liu, Yiming	Effect of interfacial properties between polyethylene and polyvinyl alcohol fiber/cement matrix on properties of mortar and ECC
Zeyad, Abdullah M. / Bayagoob, Khaled H. / Amin, Mohamed / Tayeh, Bassam A. / Mostafa, Sahar A. / Agwa, Ibrahim Saad	Effect of olive waste ash on the properties of high‐strength geopolymer concrete
Haddad, Rami H. / Alsahalen, Ala A.	End anchorage‐reinforcement CFRP systems for heat‐damaged beams with side NSM CFRP rope
Panghal, Harish / Kumar, Awadhesh	Enhancing concrete durability and strength: An innovative approach integrating abrasion and cement slurry treatment for recycled coarse aggregates
Fathy, Islam N. / El‐Sayed, Alaa A. / Tayeh, Bassam A. / Mahmoud, Alaa A. / Abouelnour, Mohamed A. / Elfakharany, Maged E.	Enhancing mechanical and radiation shielding properties of concrete with lead monoxide and granodiorite: Individual and synergistic effects at micro and nano particle scales
Corres, Enrique / Muttoni, Aurelio	Estimation of the bar stress based on crack width measurements in reinforced concrete structures
Karatas, Mehmet / Bozcan, Emre / Dener, Murat	Evaluating the high‐temperature resistance of self‐compacting mortar incorporating waste andesite powder as a mineral admixture
Omer, Brwa / Saeed, Jalal	Evaluating the shear performance of reinforced concrete beams using waste glass powder as a sustainable cement substitute
Wang, Dan‐Dan / Li, Ying‐Min / Chen, Yi / Long, Bin / Kang, Shao‐Bo / Zhou, Shu‐Rong / Preinstorfer, Philipp	Experimental and analytical investigations on bond–slip behavior of steel reinforcement in UHPFRC considering yielding
Huang, Jing / Mo, Shixu / Liu, Xiaobei	Experimental and analytical study on the bending performance of UHPC‐NC narrow steel box composite beams under negative moments
Çalışkan, Özlem / Aras, Murat / Yilmaz, Tolga / Anil, Özgür	Experimental and numerical investigation of low‐velocity impact behavior and failure mode of shear deficient RC beam strengthened with CFRP strips
McGinnis, Michael J. / Gangone, Michael V. / Nogales, Alejandro / Gomez‐Santana, Lizeth Marisol / Weldon, Brad / Reihl, Adam / Tošić, Nikola / Kurama, Yahya	Experimental and numerical investigation of the bending, shear, and punching shear behavior of recycled aggregate concrete precast/prestressed hollow core slabs
Gomes, M. Glória / Marques da Silva, F. / Sousa, J. H. / Martinho, N. / Moret Rodrigues, A.	Experimental and numerical study of wind effect on an ultra‐thin concrete triangular plan shell structure
Zhou, Bo / Si, Qi / Li, Bing / Zong, Liang / Li, Songlin	Experimental and numerical study on seismic behavior of shear wall with cast‐in situ concrete infilled walls
Chen, Pingjun / Li, Junhua / Wang, Weichen / Liu, Quan / Yang, Yukun	Experimental and simulative study on seismic performance of stiffener‐plate PEC beam‐column joint
Zhou, Jingyang / Wang, Xin / Ding, Lining / Kang, Sufang / Bai, Xingyu / Mahmoud, Maha R. I. / Wu, Zhishen	Experimental and theoretical investigations on the flexural behavior of precast concrete slabs reinforced with prestressing BFRP bars and fibers
Guo, Songsong / Liu, Chao	Experimental and theoretical research of the punching shear performance of steel‐normal concrete‐UHPC composite slabs
Di Carlo, Fabio / Rinaldi, Zila / Meda, Alberto / Molaioni, Filippo	Experimental behavior of prestressed concrete beams under simultaneous sustained loading and corrosion
Fernandes, Paulo / Elbashir, Douaa / Agante, Marta	Experimental characterization of indented dry connections for precast double‐curved concrete shells
Zhang, Jinrui / Li, Chenjiang / Lv, Tong / Hou, Dongshuai / Hong, Shuxian / Dong, Biqin	Experimental investigation on mechanical property and hydration process of sintered sludge cement paste at different water‐binder ratios and curing ages
Boomibalan, Sankar / Isleem, Haytham F. / Swaminathan, Packirisamy / Rameshkumar, Deivasigamani / Kadarkarai, Arunkumar	Experimental investigations on mechanical performance, synergy assessment, and microstructure of pozzolanic and non‐pozzolanic hybrid steel fiber reinforced concrete
Wei, Bingyan / He, Xiongjun / Chen, Tao / Wu, Chao / Wang, Huayi	Experimental research on the flexural behavior of Basalt fiber‐reinforced polymer (BFRP) and steel bars hybrid reinforced concrete beams
Zhou, Chaoyang / Huang, Lu / Surahman, Ridho / Wang, Lina / Jia, Chaojun / Wang, Yi	Experimental study on bond behavior of TRUHPC plate under freeze–thaw cycles
Hu, Dongxia / Wu, Jin / Feng, Zhe / Liu, Liqiang	Experimental study on bond performance of recycled coarse aggregates concrete with circular steel tubes after freeze–thaw cycling
Gu, Jianxiao / Li, Liancheng / Huang, Xin / Chen, Hui	Experimental study on the reinforced concrete beams with varied stirrup reinforcement ratio under static and impact loads
Qi, Ligang / Ma, Minglei / Chen, Yueshi / Liao, Xiandong / Hua, Jingjing / Liu, Yanan / Zhang, Shiqian / Li, Chang / Lu, Lei	Experimental study on the seismic behavior of a novel type of precast column‐steel beam connection with grouted corrugated metallic duct
Yuzbasi, Julide	Experimental verification of full‐scale silo structure demolition: Investigating successive column removal with finite element method and progressive collapse simulation through blast load
Meghdadi, Zeinab / Khaloo, Alireza	Experimental, theoretical and numerical study on flexural behavior of hybrid steel‐GFRP reinforced concrete slabs
Shereiqi, Amira A. / Al‐Jabri, Khalifa / Meddah, Mohammed S. / Saleh, Alaa A. / Elrahman, Mohammed Abd / Abdel‐Gawwad, Hamdy A.	Exploring the influence of carbonate minerals on the performance, volume stability, and phase composition of alkali‐activated waste glass binder at high temperatures
Sivasubramani, P. A. / Srisanthi, V. G.	Exploring the potential of fly ash cenosphere—capric acid composite phase change material in concrete incorporating supplementary cementitious material
Zeman, O. / Voit, K. / Lamplmair‐Irsigler, S.	Fastening in concrete vs. rock mass—Comparative determination of pull‐out loads for artificially created discontinuities in concrete
Kongwang, Nuttapong / Takeda, Kyoko / Sato, Yasuhiko / Pheinsusom, Phoonsak	Fatigue life prediction method for reinforced concrete deck slabs subjected to repeated moving wheel loads and failing in shear
Medeghini, Filippo / Tiberti, Giuseppe / Guhathakurta, Jajnabalkya / Simon, Sven / Plizzari, Giovanni A. / Mark, Peter	Fiber orientation and orientation factors in steel fiber‐reinforced concrete beams with hybrid fibers: A critical review
Wei, Bingyan / He, Xiongjun / Chen, Tao / Wu, Weiwei / He, Jia	Finite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams
Kefyalew, Fetih / Imjai, Thanongsak / Garcia, Reyes / Khanh Son, Nguyen	Fire behavior of high‐contents recycled aggregate concrete composite slabs with small openings
Yousef, Samy / Kalpokaitė‐Dičkuvienė, Regina / Subadra, Sharath P. / Lukošiūtė, Stasė Irena	Flexural and pseudo‐ductile behavior of e‐glass uniaxial and biaxial fabric‐reinforced cementitious matrix: Experimental study and simulation
Mudadu, Antonio / Prota, Andrea / Menna, Costantino	Flexural behavior of corroded RC beams repaired with high performance cementitious mortar under cyclic loading
Chen, An / Zhang, Zhiwei / Wan, Yufeng / Sun, Jing	Flexural behavior of innovative multifunctional concrete sandwich shells with different types of connectors
Liang, Ninghui / You, Xiufei / Zhou, Kan / Liu, Xinrong / Mao, Jinwang	Flexural fatigue performance and damage evolution analysis of multiscale polypropylene fiber‐reinforced concrete
Chen, Ying / Shi, Hai‐Rong / Zhu, Hong / Wang, Chun‐Lin / Zeng, Bin	Flexural mechanism and design method for precast concrete splice slabs with welded junction plates
Moujoud, Zineb / Sair, Said / Ait Ousaleh, Hanane / Amadine, Othmane / Ayouch, Ikrame / Zahouily, Mohamed / El Bouari, Abdeslam / Tanane, Omar	High‐performance geopolymer from brick wastes and metakaolin: Alkali treatment optimization, phase transformation, and property analysis
Katlav, Metin / Turk, Kazim / Turgut, Paki	The impact of different length hooked‐end fibers on the structural performance of RC folded plates
Cakmak, Talip / Ustabas, Ilker / Kurt, Zafer / Gürbüz, Ali	The importance of early strength in structural applications: Obsidian‐based geopolymer mortars and silica fume substitution study
Katlav, Metin / Ergen, Faruk	Improved forecasting of the compressive strength of ultra‐high‐performance concrete (UHPC) via the CatBoost model optimized with different algorithms
Biswal, Aparup / Prasad, A. Meher / Sengupta, Amlan Kumar	Influence of diagonal reinforcement in grouted vertical joints between precast concrete wall panels, part I: Experimental investigation
Pulkit, Umang / Adhikary, Satadru Das / Kodur, Venkatesh	Influence of fire severity and concrete properties on the thermo‐hygral behavior of concrete during fire exposure
Huang, Zhenyu / Lai, Zhouyuan / Chen, Lijie / Zhou, Yingwu	Interfacial bond–slip performances of CFRP tube‐ultralightweight cement composite‐stainless steel tubular pipe
Mei, Shengqi / Liu, Xiaodong / Wang, Xingju / Li, Xufeng	Interpretable machine‐learning models for predicting creep recovery of concrete
Aghdami Sani, Mohammad Reza / Ferdousi, Adel / Pourbaba, Masoud / Zandi, Yousef / Mirrezaei, Seyed Saeed	Investigating the effect of steel micro‐ and macro‐fibers on the bond behavior of steel rebar embedded in ultra‐high performance concrete
Luo, Jie / Nagai, Kohei	Investigating the flexural behavior of ASR‐damaged RC beam through internal stress and cracking development using 3D Rigid Body Spring Model
Almeida, Ricardo Laguardia Justen de / Parsekian, Guilherme Aris / Carnio, Marco Antonio	Investigation on the flexural behavior of high‐strength fiber‐reinforced concrete
Angelin Lincy, G. / Velkennedy, R.	Investigation on the flexural behavior of reinforced geopolymer concrete slabs incorporating Metakaolin and Nano‐silica composite
Al‐Talqani, Noor Al‐Huda / Al‐Thairy, Haitham	Investigation the behavior of LWAC encased steel columns after exposure to elevated temperature
Mahmoud, Khaled A. / Abdel Raheem, Shehata E. / Mansour, Mahmoud H.	Lateral deflections of slender RC columns under eccentric compression loading with different end conditions
Gehri, Nicola / Amin, Ali / Kraus, Michael Anton / Kaufmann, Walter	Limit analysis and design recommendations for fiber‐reinforced concrete subjected to shear
He, Zhi‐Qi / Sami Ullah, Muhammad / Liu, Gao	Load‐path analysis of transverse tensile stresses in multiple‐pile caps
Isleem, Haytham F. / Qiong, Tang / Chukka, Naga Dheeraj Kumar Reddy / Kumar, Rakesh / Nagaraju, T. Vamsi / Hamed, Asmaa Y.	Machine learning and nonlinear finite element analysis of fiber‐reinforced polymer‐confined concrete‐steel double‐skin tubular columns under axial compression
Imran, Muhammad / Amjad, Hassan / Khan, Shayan / Ali, Shehroze	Machine learning assisted prediction of the mechanical properties of carbon nanotube‐incorporated concrete
Reshi, Iraq Ahmad / Shah, Asif H. / Jan, Abrak / Tariq, Zainab / Sholla, Sahil / Rashid, Sami / Wani, Mohammad Umer	Machine learning enhanced modeling of steel‐concrete bond strength under elevated temperature exposure
Larsen, Jeff / Poulsen, Peter Noe / Olesen, John Forbes / Cao Hoang, Linh	Material optimization of reinforced concrete structures in multiple limit states
Pratap, Bheem / Paswan, Rajesh Kumar / Kumar, Pramod	Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposure
Şahin, Hatice Gizem / Akgümüş, Fatih Eren / Mardani, Ali	Mechanical and rheological properties of fiber‐reinforced 3D printable concrete; in terms of fiber content and aspect ratio
Zhou, Zheng / Zhou, Xuhong	Mechanical behavior of prestressed UHPC wind turbine tower columns under combined axial compression and bending
Sun, Xiaoyan / Liu, Jingrui / Zhao, Weijian / Wang, Hailong / Yang, Yuanzhang	Mechanical performance and structural application of a novel basalt‐fiber‐reinforced ultra‐high‐performance seawater‐sea‐sand concrete (UHPSSC) with basalt coarse aggregate
Yin, Jicai / Ren, Chonggang / Bian, Bingchuan / Guo, Peng / Xie, Xuehu	Mechanical properties and damping ratio of gradient polymer concrete for damping beam structure
Cao, Qi / Ding, Zezhi / Xu, Jihang / Ma, Zhongguo John	Mechanical properties of CFRP and shrinkage compensating concrete actively confined and strengthened short columns under freeze–thaw cycles
Patchirajan, Ulagambika / Madasamy, Murugan	Mechanical properties of geopolymer concrete specimens exposed to fire retrofitted with glass and basalt fiber reinforced polymer laminates
Alomayri, Thamer / Raza, Ali / Elhadi, Khaled Mohamed / Shaikh, Faiz	Mechanical, microstructural, and thermal characterization of geopolymer composites with nano‐alumina particles and micro steel fibers
Zhang, Kangjian / Zhang, Zhiqiang / Xu, Jialei	Mechanical‐performance deterioration of RC segment of shield tunnel under high corrosion degree and the transformation of eccentric‐failure mode
Ren, Qifan / Pacheco, João / de Brito, Jorge	Mesoscale modeling of recycled aggregate concrete: A parametric analysis of the quality and shape of aggregate
Skarżyński, Łukasz / Miśkiewicz, Mikołaj	Method for prediction of the frost resistance ability of air‐entrained concrete based on the 3D air void characteristics by x‐ray micro‐CT
Petri, Micha	Midspan expansion joint at Loko Oweto Bridges, Nigeria (or: “This bridge is too long, what should we do?”)
Aziza, Kuldasheva / Li, Beixing / Huang, Bin / Kholjigit, Kuldashev / Yu, Yang	Mitigating autogenic shrinkage in high‐performance concrete using wollastonite: A structural enhancement approach
Yu, Feng / Zhang, Yuxuan / Song, Zekang / Fang, Yuan / Xu, Bo / Chen, Zongping / Zhang, Yufen	A model for predicting flexural capacity of PVC‐CFRP tube confined reinforced concrete beams
Malja, Xhemsi / Nussbaumer, Alain / Muttoni, Aurelio	Model uncertainties in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures
Tran, Tung T. / Pham, Thong M. / Tran, Duong T. / Ha, Ngoc San / Hao, Hong	Modified plastic damage model for steel fiber reinforced concrete
Csorba, Kristóf / Kapitány, Kristóf / Cimer, Zsolt / Hlavička, Viktor / Biró, András / Lublóy, Éva	Monitoring of historical structural materials with computed tomography
Yuan, Pengcheng / Xu, Shenchun / Yang, Ting / Zhou, Yun / Su, Yu / Shao, Ruizhe	Multiple blast behavior of steel wire mesh reinforced geopolymer based high performance concrete (G‐HPC) slab: Experiment and numerical simulation
Rossi, Laura / Patel, Ravi A. / Dehn, Frank	New analytical models to predict the mechanical performance of steel fiber‐reinforced alkali‐activated concrete
Lipowczan, Martin / Novak, Lukas / Lehký, David / Novák, Drahomír	Nonlinear global design resistance: Case studies of post‐tensioned concrete bridges made of I‐73 and KA‐61 girders
Monier, Ahmed / Saifeldeen, Mohamed A. / Fouad, Nariman	Numerical analysis of reinforced concrete beams enhanced in shear with external polymer cement mortar‐bonded FRP grid
Xu, Chi / Zhang, Ying / Isleem, Haytham F. / Qiu, Dianle / Zhang, Yun / Alsaadawi, Mostafa Medhat / Kumar Tipu, Rupesh / El‐Demerdash, Waleed E. / Hamed, Asmaa Y.	Numerical and machine learning models for concentrically and eccentrically loaded CFST columns confined with FRP wraps
Dangwal, Shubham / Singh, Heaven	Numerical investigation of corroded reinforced concrete exterior beam‐column joints under quasi‐static reverse cyclic loading
Cardoso, Bárbara / Cavaco, Eduardo / Júlio, Eduardo / Tavares, Maria Elizabeth	Numerical investigation on the behavior of thin concrete shells subjected to nonuniform and asymmetrical loads
Galano, Simone / Losanno, Daniele / Parisi, Fulvio	Numerical simulation of post‐tensioned concrete girders with defective grouting including local stress–strain tendons response
Yin, Xiuliang / Wu, Zhijun / Weng, Lei / Liu, Quansheng	Numerical simulation of the grouting penetration process by developing a temperature‐dependent spatial–temporal rheological model
Yan, David / Wang, Qiang	Numerical simulation on structural behavior of FRP profile‐concrete hybrid beams with bolt shear connector
Sharaf, Tarek / Ismail, Sara / Elghandour, Mohamed / Turk, Ahmed	Numerical study of low‐rise composite steel frame responses to blast loading using direct simulation method
Sreekumaran, Sreenath / Krishna, Arathi / Karuppanan, Kathiresan	Opening and out‐of‐plane shear fracture performance of steel and natural sisal hybrid fiber reinforced concrete
Xiang, Yu / Duan, Peilun / Wang, Jilin / Jiang, Guokang / Hu, Zuhao / Xiao, Qiyuan / Zeng, Xiaohui	Optimization of steam curing process for Chinese Western and Northeast regions' high‐speed railway concrete prefabricated components
Ulucan, Muhammed / Gunduzalp, Emrullah / Yildirim, Gungor / Alatas, Bilal / Alyamaç, Kürşat Esat	Optimizing sustainable concrete compressive strength prediction: A new particle swarm optimization‐based metaheuristic approach to neural network modeling for circular economy and disaster resilience
Zedan Khalel, Hamad Hasan / Khan, Muhammad / Starr, Andrew / Sadawi, Noureddin / Mohamed, Omar Ahmed / Khalil, Ashraf / Esaker, Mohamed	Parametric study for optimizing fiber‐reinforced concrete properties
Morger, Fabian / Kenel, Albin / Kaufmann, Walter	Passive confinement of reinforced concrete members revisited
Dangwal, Shubham / Kumar, Tasham / Singh, Heaven / Sharma, Raju	Performance of corroded RC beam–column joints repaired using a hybrid scheme with HSFRC and stirrups replacement
Lenticchia, Erica / Sorrentino, Gerardo / Ceravolo, Rosario / Tondolo, Francesco	Performance of historical ferrocement specimens subjected to corrosive environments
Nguyen‐Van, Vuong / Peng, Chenxi / Hazell, Paul J. / Lee, Jaehong / Nguyen‐Xuan, H. / Tran, Phuong	Performance of meta concrete panels subjected to explosive load: Numerical investigations
Kumar, Shivam / Gupta, Pramod Kumar / Iqbal, Mohd. Ashraf	Performance of self‐compacting alkali‐activated slag concrete‐filled cold‐formed steel tubular stub columns
Ciambella, Jacopo / Ranzi, Gianluca / Romeo, Francesco	The Pier Luigi Nervi's concrete structure of Palazzetto dello Sport: Modeling and dynamic characterization
Zažirej, Stanislav / Maekawa, Koichi / Hosoda, Akira	Poromechanical approach to blast‐induced dynamic fracture in concrete
Patra, Rakesh Kumar / Gupta, Pramod Kumar	Post fire behavior of square and rectangular concrete filled steel tubes with granulated blast furnace slag fine aggregate concrete
Kumar, Prashant / Arora, Harish Chandra / Siva Chidambaram, R. / Kumar, Aman	Prediction of confined compressive strength of concrete column strengthened with FRCM composites
Kumar, Rakesh / Rai, Baboo / Samui, Pijush	Prediction of mechanical properties of high‐performance concrete and ultrahigh‐performance concrete using soft computing techniques: A critical review
Abdulrahman, Payam Ismael / Kakasor Ismael Jaf, Dilshad / Malla, Sirwan Khuthur / Mohammed, Ahmed Salih / Kurda, Rawaz / Asteris, Panagiotis G. / Sihag, Parveen	Predictive modeling of compressive strength in silica fume‐modified self‐compacted concrete: A soft computing approach
Yang, Haifeng / Li, Hongrui / Jiang, Jiasheng	Predictive modeling of compressive strength of geopolymer concrete before and after high temperature applying machine learning algorithms
Colombo, Matteo / Martinelli, Paolo	Pressure–impulse diagrams of RC beams considering fire–blast interaction
Liang, Quping / Zhang, Shengtao / Zhang, Ning / Ge, Zhi / Lv, Leyang / Ling, Yifeng / Zhang, Hongzhi	Properties of lightweight foamed concrete containing gold tailings as subgrade filler
Faustmann, Sören / Landler, Josef / Fischer, Oliver / Bauermeister, Ulrich / Furche, Johannes	Punching shear behavior of steel fiber‐reinforced slabs with Filigran® punching shear reinforcement
Chen, S. / Visintin, P. / Sturm, A. B. / Oehlers, D. J.	Quantifying the serviceability flexural benefits of using UHPFRC in profiled slabs
Civera, Marco / Naseem, Ahmad / Chiaia, Bernardino	Recent advances in embedded technologies and self‐sensing concrete for structural health monitoring
Küttenbaum, Stefan / Braml, Thomas / Heinze, Marco / Kainz, Christian / Stettner, Christian / Taffe, Alexander	Reliability and partial factor‐based assessment of a highway bridge supported by nondestructive testing
Tong, Yuting / Yao, Jitao / Zhang, Luyang	Reliability design for bearing capacity of steel plate strengthened RC beams based on the improved design value method
Binlin, Xu / Zhongchu, Tian / Xiaoping, Shen / Wenguang, Bai	Reliability evaluation of reinforced concrete arch bridges during construction based on LGSSA‐SVR hybrid algorithm
Ding, Fa‐xing / Huang, Xin‐yu / Gong, Chen‐jie / Pi, Zheng‐bo	Research on the mechanical performance of circular concrete‐filled steel tube columns under bending‐torsional coupling
Yager, Jacob / Bentz, Evan C. / Woods, Joshua E. / Hoult, Neil A.	Revealing fundamental flexural behavior of reinforced concrete slabs using distributed fiber optic sensors
Ramos, António / Marchão, Carla / Pacheco, João Nuno / Enfedaque, Alejandro / Coronelli, Dario / Faria, Duarte / de Brito, Jorge / Ruiz, Miguel Fernández / Marreiros, Rui	A review of punching behavior of slab–column connections with recycled coarse aggregate concrete
Kralovanec, Jakub / Moravcik, Martin / Zahuranec, Michal / Sifta, Radim / Somer, Jakub	Saw‐cut method verification for determining the most important factors influencing its applicability
Xu, Dingyi / Chen, Zongping / Mo, Linlin	Seismic performance of conrete‐filled steel tube column‐reinforced concrete beam frame using 100% recycled coarse aggregate
Jiang, Qing / Su, Wenji / Feng, Yulong / Shen, Jie / Fan, Yonglong / Xuan, Dianchun	Seismic performance of RC exterior wide beam–column joints
Zhang, Zheng / Cong, Shuping / Zhang, Yangang / Chen, Yongtao	Seismic performance of reinforced concrete stairs with new sliding support
Hillebrand, Matthias / Sinning, Annkathrin / Hegger, Josef	Shear and interface shear fatigue of semi‐precast slabs with lattice girders under cyclic loading
Wu, Fangwen / Zhao, Bitong / Liu, Zhuo / Li, Zirun / He, Lanqing / Fan, Zhou	Shear behavior of stud and SFCBs‐reinforced PBL composite connectors in steel‐concrete structures
Wu, Fangwen / Cao, Jincheng / Zhao, Bitong / Lei, Haipeng / Li, Zirun / Chen, Ao	Shear mechanism of UHPC epoxied‐keyed joints in PSUBs: Experimental and numerical investigations
Xia, Ting / Zhang, Wei / Huang, Min / Huang, Hua	Shear performance of basalt fiber composite RC beams with different laminated heights of basalt fiber
Hammerl, Mathias / Reichenbach, Sara / Pressmair, Nadine / Kromoser, Benjamin	Short‐length mechanical bond anchorage for reinforcement bars made of FRP: Experimental and numerical investigations
Li, Shengyu / Lim, Erwin / Chen, Zhengqing / Hong, Yu / Pu, Qianhui	Simplified method for predicting the internal forces in strut‐and‐tie model of cable pylon anchorage zone in a cable‐stayed bridge
Terjesen, Otto / Kanstad, Terje / Tan, Reignard	Simplified modified tension chord model: An alternative crack width calculation model to Eurocode 2 and fib model codes
Koopaee, Mohammad E. / Dhakal, Rajesh P.	A simplified procedure for seismic collapse probability assessment of RC frame buildings
Pejatović, Marko / Muttoni, Aurelio	Steel stresses and shear forces in reinforcing bars due to dowel action
Zhang, Penghui / Zhou, Lianxu / Guo, Junjun / Wang, Zhiqiang	Strut‐and‐tie model for column‐to‐drilled shaft connections in reinforced concrete bridge columns subjected to lateral loads
He, Zhenjun / Yang, Jinpeng / Qin, Jieqiong / Ma, Yanni / Song, Guojie / Han, Xiu	The study on bond‐slip constitutive model of recycled concrete under different loading rates
Gao, Yan / Wang, Yushan / Zhu, Wenxing / Wang, Haifeng / Liao, Huan / Xiao, Di / Zhang, Ziyang	Study on seismic performance of reinforced concrete shear wall with diagonally distributed reinforcement
Ma, Yuwei / Liu, Jiamin / Li, Gang / Li, Junfeng / Yu, Ziwei / Zheng, Huaping	Study on the influence parameters and anti‐abrasion performance of steam‐cured hydraulic concrete for prefabricated water conveyance channel
Li, Wang / Ueda, Tamon	Sustainability assessment of demolition based on quantitative external costs
Monserrat‐López, Andrea / Josa, Irene / Aidarov, Stanislav / Pujadas, Pablo / de la Fuente, Albert	Sustainability of column‐supported slabs for buildings: A multi‐criteria assessment
Jain, Dipanshu / Adhikary, Satadru Das	Sustainable utilization of basalt waste dust as replacement of river sand in one‐part geopolymer mortar
Van Den Hende, Karel / Caspeele, Robby / Sýkora, Miroslav / Way, Andrew	Target reliabilities for heritage structures derived from cost optimization
Lolla, Srilakshmi / Oinam, Romanbabu M. / Furtado, A. / Varum, H.	Tensile strength and flexural behavior of steel fiber‐reinforced concrete beams
Le, Anh‐Thang / Tran, Trung‐Hau	Testing the effect of UHPFRC jacket thickness and steel fiber volume fraction on NSC‐UHPFRC column compressive behavior
Dong, Bingqing / Zhang, Shuo / Yan, Kai / Pan, Jinlong / Wang, Shangyu	Theoretical and finite element analysis of concrete filled steel tube columns‐steel reinforced ECC ring beam connections
Alcan, Haluk Görkem / Aydın, Abdulkadir Cüneyt	Torsional behavior of composite shear walls and load‐bearing sandwich panels: An experimental investigation
Bayrak, Barış	Trio/hybrid fiber effect on the geopolymer reinforced concrete for flexural and shear behavior
Valença, Jónatas / Brandão, Marco / Júlio, Eduardo	Vision‐based monitoring system for in‐plan seismic tests conducted on a shaking table: The case study of prefabricated concrete shells

About this
data sheet
IssueID
24879
Published on:
31/12/2018
Last updated on:
28/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Structural Concrete -

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Structural Concrete -

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.