Smart Materials and Structures - v. 15, n. 2 (April 2006)

Published:	April 2006

Author(s)	Title	Page(s)
Rivera, E. / Thomson, D. J.	Accurate strain measurements with fiber Bragg sensors and wavelength references	325-330
Paulitsch, C. / Gardonio, P. / Elliott, S. J.	Active vibration damping using self-sensing, electrodynamic actuators	499-508
Aldraihem, Osama J. / Khdeir, Ahmed A.	Analytical solutions of antisymmetric angle-ply laminated plates with thickness–shear piezoelectric actuators	232-242
Niederberger, Dominik / Morari, Manfred	An autonomous shunt circuit for vibration damping	359-364
Koo, Jeong-Hoi / Goncalves, Fernando D. / Ahmadian, Mehdi	A comprehensive analysis of the response time of MR dampers	351-358
Yeo, T. L. / Eckstein, D. / McKinley, B. / Boswell, L. F. / Sun, T. / Grattan, K. T. V.	Demonstration of a fibre-optic sensing technique for the measurement of moisture absorption in concrete	N40-N45
Costa Branco, P. J. / Dente, J. A.	Derivation of a continuum model and its electric equivalent-circuit representation for ionic polymer–metal composite (IPMC) electromechanics	378-392
Zhang, Tierui / Dong, Wenjun / Kasbohm, Jay / Varadan, Vijay K. / Tian, Z. Ryan	Design and hierarchical synthesis of branched heteromicrostructures	N46-N50
Nichols, J. M. / Seaver, M. / Trickey, S. T. / Salvino, L. W. / Pecora, D. L.	Detecting impact damage in experimental composite structures: an information-theoretic approach	424-434
Yang, Jinkyu / Chang, Fu-Kuo	Detection of bolt loosening in C–C composite thermal protection panels: I. Diagnostic principle	581-590
Yang, Jinkyu / Chang, Fu-Kuo	Detection of bolt loosening in C–C composite thermal protection panels: II. Experimental verification	591-599
Lopez-Garcia, Oscar / Carnicero, Alberto / Ruíz, Rosa / Talavera, Juan Antonio / Mateo, Carlos	Development of a current sensor based on active materials for high-voltage transmission systems	563-570
Kharabe, R. G. / Devan, R. S. / Kanamadi, C. M. / Chougule, B. K.	Dielectric properties of mixed Li–Ni–Cd ferrites	N36-N39
Cusano, A. / Capoluongo, P. / Campopiano, S. / Cutolo, A. / Giordano, M. / Caponero, M. / Felli, F. / Paolozzi, A.	Dynamic measurements on a star tracker prototype of AMS using fiber optic sensors	441-450
Pandit, P. / Gupta, S. M. / Wadhawan, V. K.	Effect of electric field on the shape-memory effect in Pb[(Mg1/3Nb2/3)0.70Ti0.30]O3ceramic	653-658
Ahmad, Sheikh N. / Upadhyay, C. S. / Venkatesan, C.	Electro-thermo-elastic formulation for the analysis of smart structures	401-416
Kurkuri, Mahaveer D. / Lee, Jae-Rock / Han, Jae Hung / Lee, In	Electroactive behavior of poly(acrylic acid) grafted poly(vinyl alcohol) samples, their synthesis using a Ce(IV)glucose redox system and their characterization	417-423
Annamdas, Venu Gopal Madhav / Soh, Chee Kiong	Embedded piezoelectric ceramic transducers in sandwiched beams	538-549
Duigou, L. / Daya, E. M. / Potier-Ferry, M.	Equivalent stiffness and damping of sandwich piezoelectric beams submitted to active control	623-630
Chen, Shu-Mei / Wei, Chen-Guan	Experimental study of the rheological behavior of electrorheological fluids	371-377
Prabhugoud, Mohanraj / Peters, Kara	Finite element model for embedded fiber Bragg grating sensor	550-562
Oh, Hyun-Ung / Taniwaki, Shigemune / Kinjyo, Naofumi / Izawa, Katsuhiko	Flywheel vibration isolation test using a variable-damping isolator	365-370
Annigeri, A. R. / Ganesan, N. / Swarnamani, S.	Free vibrations of simply supported layered and multiphase magneto-electro-elastic cylindrical shells	459-467
Song, G. / Mo, Y. L. / Otero, K. / Gu, H.	Health monitoring and rehabilitation of a concrete structure using intelligent materials	309-314
Bernini, R. / Fraldi, M. / Minardo, A. / Minutolo, V. / Carannante, F. / Nunziante, L. / Zeni, L.	Identification of defects and strain error estimation for bending steel beams using time domain Brillouin distributed optical fiber sensors	612-622
Wu, M. J. / Huang, W. M. / Chollet, F.	In situcharacterization of NiTi based shape memory thin films by optical measurement	N29-N35
Etches, Julie / Bond, Ian / Mellor, Phil	Manufacture and applications of magnetically active fibre reinforced composites	288-294
Bowen, C. R. / Stevens, R. / Nelson, L. J. / Dent, A. C. / Dolman, G. / Su, B. / Button, T. W. / Cain, M. G. / Stewart, M.	Manufacture and characterization of high activity piezoelectric fibres	295-301
Alici, Gursel / Metz, Philippe / Spinks, Geoffrey M.	A methodology towards geometry optimization of high performance polypyrrole (PPy) actuators	243-252
Khumpuang, Sommawan / Horade, Mitsuhiro / Fujioka, Kazuya / Sugiyama, Susumu	Microneedle fabrication using the plane pattern to cross-section transfer method	600-606
Tjahyadi, H. / He, F. / Sammut, K.	Multi-mode vibration control of a flexible cantilever beam using adaptive resonant control	270-278
Sethi, Vineet / Song, Gangbing	Multimode vibration control of a smart model frame structure	473-479
Makihara, Kanjuro / Onoda, Junjiro / Minesugi, Kenji	New approach to semi-active vibration isolation to improve the pointing performance of observation satellites	342-350
Ray, M. C. / Pradhan, A. K.	The performance of vertically reinforced 1–3 piezoelectric composites in active damping of smart structures	631-641
Lach, Cynthia L. / Turner, Travis L. / Taminger, Karen M. / Shenoy, Ravi N.	Post-processed Nitinol actuator structure–property study	485-492
Guyomar, Daniel / Magnet, Christophe / Lefeuvre, Elie / Richard, Claude	Power capability enhancement of a piezoelectric transformer	571-580
Lee, Chang Kee / Kim, Seon Jeong / Kim, Sun I. / Yi, Byung-Ju / Han, Seog Young	Preparation of chitosan microfibres using electro-wet-spinning and their electroactuation properties	607-611
Wang, Rongqiao / Cho, Chongdu / Kim, Changboo / Pan, Qiang	A proposed phenomenological model for shape memory alloys	393-400
Cho, Seok-Beom / Lee, Jung-Ju / Kwon, Il-Bum	Pulse base effect on the strain measurement of a Brillouin-scattering-based distributed optical fiber sensor	315-324
Vozzi, G. / Carpi, F. / Mazzoldi, A.	Realization of conducting polymer actuators using a controlled volume microsyringe system	279-287
Selden, Brian / Cho, Kyujin / Asada, H. Harry	Segmented shape memory alloy actuators using hysteresis loop control	642-652
Lin, Qirong / Rixen, Daniel J.	Self-switching and resistive circuits for a piezo patch in vibration suppression	518-528
Nagai, Hideki / Oishi, Ryutaro	Shape memory alloys as strain sensors in composites	493-498
Tennant, A. / Chambers, B.	Signature management of radar returns from wind turbine generators	468-472
Yan, Dong / Lal, Amit	The squeeze film damping effect of perforated microscanners: modeling and characterization	480-484
Leng, J. S. / Winter, D. / Barnes, R. A. / Mays, G. C. / Fernando, G. F.	Structural health monitoring of concrete cylinders using protected fibre optic sensors	302-308
Kang, Myeong Soo / Yong, Jae Chul / Kim, Byoung Yoon	Suppression of the polarization dependence of fiber Bragg grating interrogation based on a wavelength-swept fiber laser	435-440
Wang, S. Y. / Tai, K. / Quek, S. T.	Topology optimization of piezoelectric sensors/actuators for torsional vibration control of composite plates	253-269
Kim, Heung Soo / Ghoshal, Anindya / Kim, Jaehwan / Choi, Seung-Bok	Transient analysis of delaminated smart composite structures by incorporating the Fermi–Dirac distribution function	221-231
Berger, H. / Kari, S. / Gabbert, U. / Rodriguez-Ramos, R. / Bravo-Castillero, J. / Guinovart-Diaz, R. / Sabina, F. J. / Maugin, G. A.	Unit cell models of piezoelectric fiber composites for numerical and analytical calculation of effective properties	451-458
Thakkar, Dipali / Ganguli, Ranjan	Use of single crystal and soft piezoceramics for alleviation of flow separation induced vibration in a smart helicopter rotor	331-341
Seba, Bouzid / Ni, Jun / Lohmann, Boris	Vibration attenuation using a piezoelectric shunt circuit based on finite element method analysis	509-517
Della, Christian N. / Shu, Dongwei	Vibration of beams with embedded piezoelectric sensors and actuators	529-537
Wang, Q. / Varadan, V. K.	Vibration of carbon nanotubes studied using nonlocal continuum mechanics	659-666

Author(s)

Title

Page(s)

Rivera, E. / Thomson, D. J.

Accurate strain measurements with fiber Bragg sensors and wavelength references

325-330

Paulitsch, C. / Gardonio, P. / Elliott, S. J.

Active vibration damping using self-sensing, electrodynamic actuators

499-508

Aldraihem, Osama J. / Khdeir, Ahmed A.

Analytical solutions of antisymmetric angle-ply laminated plates with thickness–shear piezoelectric actuators

232-242

Niederberger, Dominik / Morari, Manfred

An autonomous shunt circuit for vibration damping

359-364

Koo, Jeong-Hoi / Goncalves, Fernando D. / Ahmadian, Mehdi

A comprehensive analysis of the response time of MR dampers

351-358

Yeo, T. L. / Eckstein, D. / McKinley, B. / Boswell, L. F. / Sun, T. / Grattan, K. T. V.

Demonstration of a fibre-optic sensing technique for the measurement of moisture absorption in concrete

N40-N45

Costa Branco, P. J. / Dente, J. A.

Derivation of a continuum model and its electric equivalent-circuit representation for ionic polymer–metal composite (IPMC) electromechanics

378-392

Zhang, Tierui / Dong, Wenjun / Kasbohm, Jay / Varadan, Vijay K. / Tian, Z. Ryan

Design and hierarchical synthesis of branched heteromicrostructures

N46-N50

Nichols, J. M. / Seaver, M. / Trickey, S. T. / Salvino, L. W. / Pecora, D. L.

Detecting impact damage in experimental composite structures: an information-theoretic approach

424-434

Yang, Jinkyu / Chang, Fu-Kuo

Detection of bolt loosening in C–C composite thermal protection panels: I. Diagnostic principle

581-590

Yang, Jinkyu / Chang, Fu-Kuo

Detection of bolt loosening in C–C composite thermal protection panels: II. Experimental verification

591-599

Lopez-Garcia, Oscar / Carnicero, Alberto / Ruíz, Rosa / Talavera, Juan Antonio / Mateo, Carlos

Development of a current sensor based on active materials for high-voltage transmission systems

563-570

Kharabe, R. G. / Devan, R. S. / Kanamadi, C. M. / Chougule, B. K.

Dielectric properties of mixed Li–Ni–Cd ferrites

N36-N39

Cusano, A. / Capoluongo, P. / Campopiano, S. / Cutolo, A. / Giordano, M. / Caponero, M. / Felli, F. / Paolozzi, A.

Dynamic measurements on a star tracker prototype of AMS using fiber optic sensors

441-450

Pandit, P. / Gupta, S. M. / Wadhawan, V. K.

Effect of electric field on the shape-memory effect in Pb[(Mg1/3Nb2/3)0.70Ti0.30]O3ceramic

653-658

Ahmad, Sheikh N. / Upadhyay, C. S. / Venkatesan, C.

Electro-thermo-elastic formulation for the analysis of smart structures

401-416

Kurkuri, Mahaveer D. / Lee, Jae-Rock / Han, Jae Hung / Lee, In

Electroactive behavior of poly(acrylic acid) grafted poly(vinyl alcohol) samples, their synthesis using a Ce(IV)glucose redox system and their characterization

417-423

Annamdas, Venu Gopal Madhav / Soh, Chee Kiong

Embedded piezoelectric ceramic transducers in sandwiched beams

538-549

Duigou, L. / Daya, E. M. / Potier-Ferry, M.

Equivalent stiffness and damping of sandwich piezoelectric beams submitted to active control

623-630

Chen, Shu-Mei / Wei, Chen-Guan

Experimental study of the rheological behavior of electrorheological fluids

371-377

Prabhugoud, Mohanraj / Peters, Kara

Finite element model for embedded fiber Bragg grating sensor

550-562

Oh, Hyun-Ung / Taniwaki, Shigemune / Kinjyo, Naofumi / Izawa, Katsuhiko

Flywheel vibration isolation test using a variable-damping isolator

365-370

Annigeri, A. R. / Ganesan, N. / Swarnamani, S.

Free vibrations of simply supported layered and multiphase magneto-electro-elastic cylindrical shells

459-467

Song, G. / Mo, Y. L. / Otero, K. / Gu, H.

Health monitoring and rehabilitation of a concrete structure using intelligent materials

309-314

Bernini, R. / Fraldi, M. / Minardo, A. / Minutolo, V. / Carannante, F. / Nunziante, L. / Zeni, L.

Identification of defects and strain error estimation for bending steel beams using time domain Brillouin distributed optical fiber sensors

612-622

Wu, M. J. / Huang, W. M. / Chollet, F.

In situcharacterization of NiTi based shape memory thin films by optical measurement

N29-N35

Etches, Julie / Bond, Ian / Mellor, Phil

Manufacture and applications of magnetically active fibre reinforced composites

288-294

Bowen, C. R. / Stevens, R. / Nelson, L. J. / Dent, A. C. / Dolman, G. / Su, B. / Button, T. W. / Cain, M. G. / Stewart, M.

Manufacture and characterization of high activity piezoelectric fibres

295-301

Alici, Gursel / Metz, Philippe / Spinks, Geoffrey M.

A methodology towards geometry optimization of high performance polypyrrole (PPy) actuators

243-252

Khumpuang, Sommawan / Horade, Mitsuhiro / Fujioka, Kazuya / Sugiyama, Susumu

Microneedle fabrication using the plane pattern to cross-section transfer method

600-606

Tjahyadi, H. / He, F. / Sammut, K.

Multi-mode vibration control of a flexible cantilever beam using adaptive resonant control

270-278

Sethi, Vineet / Song, Gangbing

Multimode vibration control of a smart model frame structure

473-479

Makihara, Kanjuro / Onoda, Junjiro / Minesugi, Kenji

New approach to semi-active vibration isolation to improve the pointing performance of observation satellites

342-350

Ray, M. C. / Pradhan, A. K.

The performance of vertically reinforced 1–3 piezoelectric composites in active damping of smart structures

631-641

Lach, Cynthia L. / Turner, Travis L. / Taminger, Karen M. / Shenoy, Ravi N.

Post-processed Nitinol actuator structure–property study

485-492

Guyomar, Daniel / Magnet, Christophe / Lefeuvre, Elie / Richard, Claude

Power capability enhancement of a piezoelectric transformer

571-580

Lee, Chang Kee / Kim, Seon Jeong / Kim, Sun I. / Yi, Byung-Ju / Han, Seog Young

Preparation of chitosan microfibres using electro-wet-spinning and their electroactuation properties

607-611

Wang, Rongqiao / Cho, Chongdu / Kim, Changboo / Pan, Qiang

A proposed phenomenological model for shape memory alloys

393-400

Cho, Seok-Beom / Lee, Jung-Ju / Kwon, Il-Bum

Pulse base effect on the strain measurement of a Brillouin-scattering-based distributed optical fiber sensor

315-324

Vozzi, G. / Carpi, F. / Mazzoldi, A.

Realization of conducting polymer actuators using a controlled volume microsyringe system

279-287

Selden, Brian / Cho, Kyujin / Asada, H. Harry

Segmented shape memory alloy actuators using hysteresis loop control

642-652

Lin, Qirong / Rixen, Daniel J.

Self-switching and resistive circuits for a piezo patch in vibration suppression

518-528

Nagai, Hideki / Oishi, Ryutaro

Shape memory alloys as strain sensors in composites

493-498

Tennant, A. / Chambers, B.

Signature management of radar returns from wind turbine generators

468-472

Yan, Dong / Lal, Amit

The squeeze film damping effect of perforated microscanners: modeling and characterization

480-484

Leng, J. S. / Winter, D. / Barnes, R. A. / Mays, G. C. / Fernando, G. F.

Structural health monitoring of concrete cylinders using protected fibre optic sensors

302-308

Kang, Myeong Soo / Yong, Jae Chul / Kim, Byoung Yoon

Suppression of the polarization dependence of fiber Bragg grating interrogation based on a wavelength-swept fiber laser

435-440

Wang, S. Y. / Tai, K. / Quek, S. T.

Topology optimization of piezoelectric sensors/actuators for torsional vibration control of composite plates

253-269

Kim, Heung Soo / Ghoshal, Anindya / Kim, Jaehwan / Choi, Seung-Bok

Transient analysis of delaminated smart composite structures by incorporating the Fermi–Dirac distribution function

221-231

Berger, H. / Kari, S. / Gabbert, U. / Rodriguez-Ramos, R. / Bravo-Castillero, J. / Guinovart-Diaz, R. / Sabina, F. J. / Maugin, G. A.

Unit cell models of piezoelectric fiber composites for numerical and analytical calculation of effective properties

451-458

Thakkar, Dipali / Ganguli, Ranjan

Use of single crystal and soft piezoceramics for alleviation of flow separation induced vibration in a smart helicopter rotor

331-341

Seba, Bouzid / Ni, Jun / Lohmann, Boris

Vibration attenuation using a piezoelectric shunt circuit based on finite element method analysis

509-517

Della, Christian N. / Shu, Dongwei

Vibration of beams with embedded piezoelectric sensors and actuators

529-537

Wang, Q. / Varadan, V. K.

Vibration of carbon nanotubes studied using nonlocal continuum mechanics

659-666

Advertisement

Smart Materials and Structures - v. 15, n. 2 (April 2006)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Smart Materials and Structures - v. 15, n. 2 (April 2006)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.