Smart Materials and Structures - v. 15, n. 2 (avril 2006)

Publié:	avril 2006

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rivera, E. / Thomson, D. J.	Accurate strain measurements with fiber Bragg sensors and wavelength references	325-330
Paulitsch, C. / Gardonio, P. / Elliott, S. J.	Active vibration damping using self-sensing, electrodynamic actuators	499-508
Aldraihem, Osama J. / Khdeir, Ahmed A.	Analytical solutions of antisymmetric angle-ply laminated plates with thickness–shear piezoelectric actuators	232-242
Niederberger, Dominik / Morari, Manfred	An autonomous shunt circuit for vibration damping	359-364
Koo, Jeong-Hoi / Goncalves, Fernando D. / Ahmadian, Mehdi	A comprehensive analysis of the response time of MR dampers	351-358
Yeo, T. L. / Eckstein, D. / McKinley, B. / Boswell, L. F. / Sun, T. / Grattan, K. T. V.	Demonstration of a fibre-optic sensing technique for the measurement of moisture absorption in concrete	N40-N45
Costa Branco, P. J. / Dente, J. A.	Derivation of a continuum model and its electric equivalent-circuit representation for ionic polymer–metal composite (IPMC) electromechanics	378-392
Zhang, Tierui / Dong, Wenjun / Kasbohm, Jay / Varadan, Vijay K. / Tian, Z. Ryan	Design and hierarchical synthesis of branched heteromicrostructures	N46-N50
Nichols, J. M. / Seaver, M. / Trickey, S. T. / Salvino, L. W. / Pecora, D. L.	Detecting impact damage in experimental composite structures: an information-theoretic approach	424-434
Yang, Jinkyu / Chang, Fu-Kuo	Detection of bolt loosening in C–C composite thermal protection panels: I. Diagnostic principle	581-590
Yang, Jinkyu / Chang, Fu-Kuo	Detection of bolt loosening in C–C composite thermal protection panels: II. Experimental verification	591-599
Lopez-Garcia, Oscar / Carnicero, Alberto / Ruíz, Rosa / Talavera, Juan Antonio / Mateo, Carlos	Development of a current sensor based on active materials for high-voltage transmission systems	563-570
Kharabe, R. G. / Devan, R. S. / Kanamadi, C. M. / Chougule, B. K.	Dielectric properties of mixed Li–Ni–Cd ferrites	N36-N39
Cusano, A. / Capoluongo, P. / Campopiano, S. / Cutolo, A. / Giordano, M. / Caponero, M. / Felli, F. / Paolozzi, A.	Dynamic measurements on a star tracker prototype of AMS using fiber optic sensors	441-450
Pandit, P. / Gupta, S. M. / Wadhawan, V. K.	Effect of electric field on the shape-memory effect in Pb[(Mg1/3Nb2/3)0.70Ti0.30]O3ceramic	653-658
Ahmad, Sheikh N. / Upadhyay, C. S. / Venkatesan, C.	Electro-thermo-elastic formulation for the analysis of smart structures	401-416
Kurkuri, Mahaveer D. / Lee, Jae-Rock / Han, Jae Hung / Lee, In	Electroactive behavior of poly(acrylic acid) grafted poly(vinyl alcohol) samples, their synthesis using a Ce(IV)glucose redox system and their characterization	417-423
Annamdas, Venu Gopal Madhav / Soh, Chee Kiong	Embedded piezoelectric ceramic transducers in sandwiched beams	538-549
Duigou, L. / Daya, E. M. / Potier-Ferry, M.	Equivalent stiffness and damping of sandwich piezoelectric beams submitted to active control	623-630
Chen, Shu-Mei / Wei, Chen-Guan	Experimental study of the rheological behavior of electrorheological fluids	371-377
Prabhugoud, Mohanraj / Peters, Kara	Finite element model for embedded fiber Bragg grating sensor	550-562
Oh, Hyun-Ung / Taniwaki, Shigemune / Kinjyo, Naofumi / Izawa, Katsuhiko	Flywheel vibration isolation test using a variable-damping isolator	365-370
Annigeri, A. R. / Ganesan, N. / Swarnamani, S.	Free vibrations of simply supported layered and multiphase magneto-electro-elastic cylindrical shells	459-467
Song, G. / Mo, Y. L. / Otero, K. / Gu, H.	Health monitoring and rehabilitation of a concrete structure using intelligent materials	309-314
Bernini, R. / Fraldi, M. / Minardo, A. / Minutolo, V. / Carannante, F. / Nunziante, L. / Zeni, L.	Identification of defects and strain error estimation for bending steel beams using time domain Brillouin distributed optical fiber sensors	612-622
Wu, M. J. / Huang, W. M. / Chollet, F.	In situcharacterization of NiTi based shape memory thin films by optical measurement	N29-N35
Etches, Julie / Bond, Ian / Mellor, Phil	Manufacture and applications of magnetically active fibre reinforced composites	288-294
Bowen, C. R. / Stevens, R. / Nelson, L. J. / Dent, A. C. / Dolman, G. / Su, B. / Button, T. W. / Cain, M. G. / Stewart, M.	Manufacture and characterization of high activity piezoelectric fibres	295-301
Alici, Gursel / Metz, Philippe / Spinks, Geoffrey M.	A methodology towards geometry optimization of high performance polypyrrole (PPy) actuators	243-252
Khumpuang, Sommawan / Horade, Mitsuhiro / Fujioka, Kazuya / Sugiyama, Susumu	Microneedle fabrication using the plane pattern to cross-section transfer method	600-606
Tjahyadi, H. / He, F. / Sammut, K.	Multi-mode vibration control of a flexible cantilever beam using adaptive resonant control	270-278
Sethi, Vineet / Song, Gangbing	Multimode vibration control of a smart model frame structure	473-479
Makihara, Kanjuro / Onoda, Junjiro / Minesugi, Kenji	New approach to semi-active vibration isolation to improve the pointing performance of observation satellites	342-350
Ray, M. C. / Pradhan, A. K.	The performance of vertically reinforced 1–3 piezoelectric composites in active damping of smart structures	631-641
Lach, Cynthia L. / Turner, Travis L. / Taminger, Karen M. / Shenoy, Ravi N.	Post-processed Nitinol actuator structure–property study	485-492
Guyomar, Daniel / Magnet, Christophe / Lefeuvre, Elie / Richard, Claude	Power capability enhancement of a piezoelectric transformer	571-580
Lee, Chang Kee / Kim, Seon Jeong / Kim, Sun I. / Yi, Byung-Ju / Han, Seog Young	Preparation of chitosan microfibres using electro-wet-spinning and their electroactuation properties	607-611
Wang, Rongqiao / Cho, Chongdu / Kim, Changboo / Pan, Qiang	A proposed phenomenological model for shape memory alloys	393-400
Cho, Seok-Beom / Lee, Jung-Ju / Kwon, Il-Bum	Pulse base effect on the strain measurement of a Brillouin-scattering-based distributed optical fiber sensor	315-324
Vozzi, G. / Carpi, F. / Mazzoldi, A.	Realization of conducting polymer actuators using a controlled volume microsyringe system	279-287
Selden, Brian / Cho, Kyujin / Asada, H. Harry	Segmented shape memory alloy actuators using hysteresis loop control	642-652
Lin, Qirong / Rixen, Daniel J.	Self-switching and resistive circuits for a piezo patch in vibration suppression	518-528
Nagai, Hideki / Oishi, Ryutaro	Shape memory alloys as strain sensors in composites	493-498
Tennant, A. / Chambers, B.	Signature management of radar returns from wind turbine generators	468-472
Yan, Dong / Lal, Amit	The squeeze film damping effect of perforated microscanners: modeling and characterization	480-484
Leng, J. S. / Winter, D. / Barnes, R. A. / Mays, G. C. / Fernando, G. F.	Structural health monitoring of concrete cylinders using protected fibre optic sensors	302-308
Kang, Myeong Soo / Yong, Jae Chul / Kim, Byoung Yoon	Suppression of the polarization dependence of fiber Bragg grating interrogation based on a wavelength-swept fiber laser	435-440
Wang, S. Y. / Tai, K. / Quek, S. T.	Topology optimization of piezoelectric sensors/actuators for torsional vibration control of composite plates	253-269
Kim, Heung Soo / Ghoshal, Anindya / Kim, Jaehwan / Choi, Seung-Bok	Transient analysis of delaminated smart composite structures by incorporating the Fermi–Dirac distribution function	221-231
Berger, H. / Kari, S. / Gabbert, U. / Rodriguez-Ramos, R. / Bravo-Castillero, J. / Guinovart-Diaz, R. / Sabina, F. J. / Maugin, G. A.	Unit cell models of piezoelectric fiber composites for numerical and analytical calculation of effective properties	451-458
Thakkar, Dipali / Ganguli, Ranjan	Use of single crystal and soft piezoceramics for alleviation of flow separation induced vibration in a smart helicopter rotor	331-341
Seba, Bouzid / Ni, Jun / Lohmann, Boris	Vibration attenuation using a piezoelectric shunt circuit based on finite element method analysis	509-517
Della, Christian N. / Shu, Dongwei	Vibration of beams with embedded piezoelectric sensors and actuators	529-537
Wang, Q. / Varadan, V. K.	Vibration of carbon nanotubes studied using nonlocal continuum mechanics	659-666

Informations
sur cette fiche
IssueID
21376
Publié(e) le:
04.12.2018
Modifié(e) le:
03.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Smart Materials and Structures - v. 15, n. 2 (avril 2006)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 15, n. 2 (avril 2006)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.