Procedia Structural Integrity - 2021

Published:	2021

Articles in this Issue

Author(s)	Title	Page(s)
Brunner, Andreas J. / Warnet, Laurent / Blackman, Bamber R. K.	35 years of standardization and research on fracture of polymers, polymer composites and adhesives in ESIS TC4: Past achievements and future directions	443-455
Fedorenko, Alexey / Fedulov, Boris / Jurgenson, Sergey / Lomakin, Evgeny	3D lattice-based structural elements for industrial application	652-657
Ibraheem, Anas / Pronina, Yulia	Accounting for shallow foundation settlement in the analysis and design of multi-storey frame buildings: Development of a new software package	942-953
Bellini, Costanzo / Berto, Filippo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia / Razavi, Javad	Additive manufacturing processes for metals and effects of defects on mechanical strength: a review	498-508
Smirnov, Sergey / Konovalov, Dmitry / Veretennikova, Irina / Pestov, Aleksander	Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State	259-264
Rizov, Victor	Analysis of delaminated multilayered functionally graded viscoelastic beam	402-415
Mirzaei, A. M. / Sapora, A. / Corrado, M. / Cornetti, P.	An Analytical Study for Debonding in Single-lap Shear Test by Considering the Residual Strength	982-988
Linardatos, Dionysios / Koukou, Vaia / Martini, Niki / Konstantinidis, Anastasios / Bakas, Athanasios / Fountos, George / Valais, Ioannis / Michail, Christos	Assessing the Information Content of a Non-Destructive Testing CMOS Imaging Detector	304-311
Akbar, Muhammad Sabiqulkhair / Prabowo, Aditya Rio / Prija Tjahjana, Dominicus Danardono Dwi / Laksono, Fajar Budi / Baek, Seung Jung	Assessment of Designed Midship Section Structures subjected to the Hydrostatic and Hydrodynamic Loads: A Convergence Study	67-74
Sánchez, Marcos / Cicero, Sergio / Arroyo, Borja	Assessment of notched Polyvinyl chloride (PVC) tubular beams using the Theory of Critical Distances and Finite Element analysis	97-106
Di Trapani, Fabio / Tomaselli, Giovanni / Vizzino, Alessandro / Bertagnoli, Gabriele	Assessment of out-of-plane strength of masonry infills through a FE augmented dataset	896-906
Dzulfiqar, Muhammad Faiz / Prabowo, Aditya Rio / Ridwan, Ridwan / Nubli, Haris	Assessment on the Designed Structural Frame of the Automatic Thickness Checking Machine – Numerical Validation in FE method	59-66
Nobile, R. / Panella, F. W. / Pirinu, A. / Saponaro, A.	Bending residual strength of damaged Al foam sandwiches through UT and IRT analyses	685-694
Toribio, Jesús	Broadening the Amplitude in the Definition of Structural Integrity: A Tribute to Galileo Galilei	1123-1130
Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia	CFRP/aluminium fibre metal laminates: numerical model for mechanical properties simulation	824-831
Toribio, Jesús	Cinema and Fracture Mechanics	1197-1202
Sapora, A. / Efremidis, G. / Cornetti, P.	Comparison between two nonlocal criteria: A case study on pressurized holes	456-464
Tretyakova, Tatyana / Tretyakov, Mikhail / Feklistova, Evgenia	Complex study of the Portevin-Le Chatelier effect by uniaxial tension of axisymmetric specimens with ring concentrators of various geometries	1013-1018
Brito, R. F. N. / Campilho, R. D. S. G. / Moreira, R. D. F. / Sánchez-Arce, I. J. / Silva, F. J. G.	Composite stepped-lap adhesive joint analysis by cohesive zone modelling	665-672
Tretyakov, M. P. / Wildemann, V. E. / Tretyakova, T. V. / Safronov, S. A.	Computational and experimental study of strain localization processes on the postcritical stage of deformation	871-877
Alberini, Riccardo / Spagnoli, Andrea / Terzano, Michele / Raposio, Edoardo	Computational mechanical modeling of human skin for the simulation of reconstructive surgery procedures	556-563
Palumbo, Davide / Finis, Rosa De / Carolo, Francesca Di / Galietti, Umberto	Considerations on the Thermoelastic Effect in proximity of crack tips on Titanium and Aluminium: a new formulation	528-543
Di Trapani, Fabio / Sberna, Antonio Pio / Marano, Giuseppe Carlo	Cost and EAL based optimization for seismic reinforcement of RC structures	917-924
Di Cocco, V. / Bellini, C. / Iacoviello, F. / Mocanu, L.P / Berto, F. / Panetta, R.	Cycling model for a NiTi Shape Memory Alloy	1035-1041
Caivano, Riccardo / Tridello, Andrea / Paolino, Davide / Berto, Filippo	Defect-Driven Topology Optimisation: TopFat algorithm extended to commercial software for wide-ranging applications	1095-1102
Sanjaya, Yuwana / Prabowo, Aditya Rio / Imaduddin, Fitrian / Binti Nordin, Nur Azmah	Design and Analysis of Mesh Size Subjected to Wheel Rim Convergence Using Finite Element Method	51-58
Hachimi, Taoufik / Naboulsi, Nassima / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan	Design and Manufacturing of a 3D printer filaments extruder	907-916
Hayashi, Saki / Kawabata, Tomoya / Yoshimoto, Masayuki / Yamamoto, Masayuki	Deterioration of HAZ toughness by residual Sn and Determination of its Allowable Content for Electric Furnace Steels	1162-1172
Martini, Niki / Koukou, Vaia / Michail, Christos / Fountos, George	Dual Energy X-ray Method for Kidney Stones and Atherosclerotic Plaques Structural Integrity Characterization	295-303
Uvarov, Sergey / Chudinov, Vasiliy	Dynamic and quasistatic interlaminar shear strength of carbon fiber laminate under bi-axial loading conditions	465-468
Fesenko, Anna / Vaysfel’d, Natalya	The dynamical problem for the infinite elastic layer with a cylindrical cavity	509-527
Mysov, K. / Vaysfeld, N.	The dynamical stress concentration near a cone-shaped crack in a twice-truncated elastic cone	365-370
Pilone, D. / Mondal, A. / Felli, F.	Effect of dispersed particles on TiAl alloys fracture behavior	245-250
Martínez, Víctor / Cicero, Sergio / Arroyo, Borja	Effect of graphene on the fracture behaviour of 3D printed PLA SENB specimens	89-96
Mondal, A. / Pilone, D. / Brotzu, A. / Felli, F.	Effect of heat treatment on mechanical properties of FeMnAlC alloys	237-244
Vigna, Lorenzo / Calzolari, Andrea / Galizia, Giuseppe / Belingardi, Giovanni / Paolino, Davide Salvatore	Effect of impact speed and friction on the in-plane crashworthiness of composite plates	623-629
Tonolini, Pietro / Montesano, Lorenzo / Pola, Annalisa / Landriani, Ettore / Gelfi, Marcello	The effect of laser-cladding on the wear behavior of gray cast iron brake disc	1152-1161
Jesus, Joel / Neto, DM / Fernandes, RF / Borges, MF / Antunes, FV / Sérgio, ER	Effect of remaining ligament on fatigue crack growth	598-604
Okulova, D. D. / Sedova, O. S. / Pronina, Yu. G.	The Effect of Surface Defects Interaction on the Strength of a Pressurised Spherical Shell	1055-1064
Ammendolea, Domenico / Greco, Fabrizio / Lonetti, Paolo / Pascuzzo, Arturo	An effective modeling approach based on the ALE and M-integral for simulating crack propagation under thermo-mechanical loadings	858-870
Tyutin, M. R. / Botvina, L. R. / Ioffe, A. V.	Effects of long-term operation on mechanical and physical characteristics of structural materials	765-772
Rizov, Victor	Effects of strain recovery on longitudinal fracture in continuously inhomogeneous viscoelastic beams	416-427
Toribio, Jesús / Ayaso, Francisco-Javier / Rodríguez, Rocío	Evolution of non-metallic inclusions with cold drawing in progressively cold drawn eutectoid pearlitic steel wires	1209-1214
Freeman, Ashley Amanda / Wan, Di / Bertolin, Chiara	Examining the effect of indentation separation on the properties of proteinaceous adhesive films made bone gelatine	265-278
Beibei, Xiong / Devid, Falliano / Carlo, Marano Giuseppe / Luciana, Restuccia / Fabio, Di Trapani / Andrea, Ferro Giuseppe	Experimental Characterization of Mortar with Recycled PET Aggregate: Preliminary Results	1027-1034
Pittau, Fabrizio / Doveri, Fabiuo / Puppio, Mario Lucio / Stochino, Flavio / Mistretta, Fausto / Sassu, Mauro	Experimental tests on vapor and gas permeability of concrete boxes	630-645
Triantis, Dimos / Stavrakas, Ilias / Loukidis, Andronikos / Pasiou, Ermioni D. / Kourkoulis, Stavros K.	Exploring the acoustic activity in marble specimens under tension while entering into the stage of impending fracture	330-336
Fajri, Aprianur / Prabowo, Aditya Rio / Muhayat, Nurul / Smaradhana, Dharu Feby / Bahatmaka, Aldias	Fatigue Analysis of Engineering Structures: State of Development and Achievement	19-26
Song, Wei / Li, Jingjing / Liu, Xuesong / Wang, Ping / Wan, Di / Berto, Filippo	Fatigue crack growth rates of 10CrNi3MoV steel welded joints considering the stress ratio	802-808
Santonocito, Dario / Cucinotta, Filippo / Guglielmino, Eugenio / Risitano, Giacomo	Fatigue damage assessment of welded HDPE details evaluating their energy release	724-733
Paiva, Vitor E. L. / Gonzáles, Giancarlo L. G. / Vieira, Ronaldo D. / Ribeiro, Alexandre S. / d’Almeida, Ana L. F. S. / Freire, José L. F.	Fatigue of buried dented pipeline specimens	159-170
Žlábek, Pavel / Koščo, Tomáš / Semeš, Marián	Fatigue properties of weld joint of gas pipelines	1007-1012
Vantadori, Sabrina / Carpinteri, Andrea / Ronchei, Camilla / Scorza, Daniela / Zanichelli, Andrea	Fatigue strength evaluation and lifetime estimation for ductile cast irons under multiaxial loading	773-780
Braet, Lucas / Juhászová, Tereza / Jindra, Daniel / Miarka, Petr / Seitl, Stanislav	Finding the optimal stress state of a stainless-steel IPE profile for fatigue experiments	1065-1072
De Maio, Umberto / Cendón, David / Greco, Fabrizio / Leonetti, Lorenzo / Nevone Blasi, Paolo / Pranno, Andrea	Finite element analysis of concrete cracking: a comparative study between a diffuse interface model and an embedded crack model	954-965
Milone, Dario / Nicita, Fabiana / Cervino, Gabriele / Santonocito, Dario / Risitano, Giacomo	Finite Element Analysis of OT Bridge fixed prosthesis system	734-747
Foti, Pietro / Razavi, Seyed Mohammad Javad / Berto, Filippo	Fracture assessment of U-notched PMMA under mixed mode I/II loading conditions by means of local approaches.	482-490
Djordjevic, Branislav / Petrovski, Blagoj / Sedmak, Aleksandar / Kozak, Dražan / Samardzic, Ivan	Fracture behavior of reactor steel 20MnMoNi 55 in the transition temperature region	781-787
Toribio, Jesús / Ayaso, Francisco-Javier / González, Beatriz / Rodríguez, Rocío	Fracture behaviour of high-strength cold-drawn pearlitic steel wires: The role of non-metallic inclusions	1203-1208
Naimark, O. B. / Uvarov, S. V. / Nikityuk, A. S. / Kirsanov, A. R.	Fracture Criteria and Duality of Critical Damage-Failure Transitions	1115-1122
Šimonová, Hana / Lipowczan, Martin / Rozsypalová, Iva / Daněk, Petr / Lehký, David / Rovnaníková, Pavla / Keršner, Zbynĕk	Fracture parameters of alkali-activated aluminosilicate composites with ceramic precursor: durability aspects	207-214
Abrami, Maria Beatrice / Montesano, Lorenzo / Tocci, Marialaura / Pola, Annalisa / Gelfi, Marcello	High Temperature Wear Behavior of AlMgScZr Alloy Produced By Laser Powder Bed Fusion	878-886
Silva, A. F. M. V. / Peres, L. M. C. / Campilho, R. D. S. G. / Rocha, R. J. B.	Impact loading analysis of tubular adhesive joints	138-148
Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Berto, Filippo	Influence of aluminum casting alloys chemical composition on the interaction with a 304L stainless steel insert	189-197
Schoenborn, S. / Melz, T. / Baumgartner, J. / Bleicher, C.	Influence of compressed hydrogen on the fatigue behavior of a ferritic stainless steel	757-764
Vyhlídal, Michal / Rozsypalová, Iva / Šimonová, Hana / Kucharczyková, Barbara / Vavro, Leona / Vavro, Martin / Němeček, Jiří / Rovnaníková, Pavla / Keršner, Zbynĕk	Influence of rock inclusion composition on the fracture response of cement-based composite specimens	966-981
Malikova, Lucie / Miarka, Petr / Doubek, Pavel / Seitl, Stanislav	Influence of the bi-material interface on the crack propagation through a thin protective layer	605-612
Tretyakov, M. P. / Tretyakova, T. V. / Wildemann, V. E.	Influence of the loading system stiffness on the jerky flow in Al-Mg alloy at inelastic and postcritical deformation stages	1089-1094
Tretyakova, Tatyana / Tretyakov, Mikhail	Influence of the non-monotonic loading and short stops on the regularities of the jerky flow in the Al-Mg alloy	1082-1088
Boursier Niutta, C. / Tridello, A. / Belingardi, G. / Paolino, D. S.	An innovative nondestructive technique for the local assessment of residual elastic properties in laminated composites	347-356
Yagi, Toru / Imai, Yasuhito / Kawabata, Tomoya	Investigation of Pop-in Formation Mechanism in Fracture Toughness Test of Welded Joint and Revision of Acceptance Criteria	1225-1234
Prasetyo, Singgih Dwi / Istanto, Iwan / Cho, Joung Hyung / Prabowo, Aditya Rio	Investigation of Sulfur Melter Heating Coil as an Industrial Product: A Study Case on Technical Design and Structural Inspection	43-50
Wang, Zhen / Manes, Andrea	Investigation of the biaxial flexural fracture of aluminosilicate glass by smeared fixed crack method	337-346
Kansy, A. / Kaynak, M. / Bleicher, C. / Kaufmann, H.	Investigation of the statistical and geometrical size effect on the fatigue strength of EN-GJL-300 under consideration of the graphite morphology	1173-1180
Rizov, Victor	Lengthwise fracture of functionally graded beams: a study of stress relaxation effects	428-442
Lomakin, Evgeny / Fedulov, Boris	Limit plastic state of notched solids with properties dependent on the type of external forces	809-817
Matvienko, Yu. / Pisarev, V. / Eleonsky, S.	Low-cycle fatigue damage accumulation near cold-expanded hole by secondary hole drilling data	491-497
Toribio, Jesús	Macro- and micro-approach to the notch-induced fracture process and notch tensile strength in eutectoid hot-rolled pearlitic steel: Weakest Link versus Process Zone Fracture Criterion	1131-1138
Sánchez-Arce, I. J. / Gonçalves, D. C. / Ramalho, L. D. C. / Campilho, R. D. S. G. / Belinha, J.	Meshless and hyper-elastic implementation to analyse flexible adhesives	149-158
Resende, R. F. P. / Resende, B. F. P. / Sánchez-Arce, I. J. / Gonçalves, D. C. / Ramalho, L. D. C. / Campilho, R. D. S. G. / Belinha, J.	Meshless approach to material plasticity in adhesive joints	126-137
Sami, Derouiche / Salah, Bouziane / Hamoudi, Bouzerd	Mixed Finite Element for Kinking Crack Analysis in an Orthotropic Media	996-1006
Seitl, Stanislav / Andrade Lizarro, Julian Z. / Miarka, Petr	Mixed Mode I/II Fracture Resistance of Various Civil Engineering Materials by Selected Criteria	312-319
Jamali, Jamaloddin / Ashknani, Ahmad / Al-Kanderi, Ali / Hussain, Fajer	Mode I Fracture Testing of polyester	832-842
Naboulsi, Nassima / Hachimi, Taoufik / Majid, Fatima / Rhanim, Rajae / Zekriti, Najat / Rhanim, Hassan	Modeling and control of 3D filament extruder	989-995
Sánchez, Marcos / Cicero, Sergio	Multi-wall carbon nanotubes do not necessarily improve the fracture behaviour of the epoxy matrix	107-114
Ricotta, Mauro / Sorgato, Marco / Zappalorto, Michele	Notch Effect in the Tensile Quasi-Static Behaviour of 40% Short Glass Fibre - PPS Reinforced Composites	695-703
Faria, R. V. F. / Campilho, R. D. S. G. / Gonçalves, P. J. A. / Rocha, R. J. B. / Sánchez-Arce, I. J. / Silva, F. J. G.	Numerical analysis by XFEM of hybrid T-peel joints	673-684
Rosas, M. F. M. O. / Campilho, R. D. S. G. / Moreira, R. D. F.	Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesive joints	115-125
Lymperopoulos, Panagiotis N. / Theotokoglou, Efstathios E.	Numerical investigation of pentamodes crack propagation	818-823
Toribio, Jesús / González, Beatriz / Matos, Juan-Carlos	Numerical modeling of hydrogen embrittlement of pearlitic steel in the presence of blunt notches	1215-1218
Ripa, M. Della / Paolino, D. S. / Amorese, A. / Tridello, A.	Numerical modelling of the mechanical response of lattice structures produced through AM	714-723
Gaetano, Daniele / Greco, Fabrizio / Leonetti, Lorenzo / Lonetti, Paolo / Nevone Blasi, Paolo	Numerical prediction of transverse cracking and delamination in fiber-reinforced laminates by using a two-scale cohesive finite element approach	1042-1054
Aranđelović, M. / Sedmak, S. / Jovicic, R. / Kozak, D. / Đorđević, B.	Numerical simulation of crack growth in a welded joint with defects	850-857
Matveenko, V. P. / Serovaev, G. S. / Kosheleva, N. A. / Gusev, G. N.	On application of distributed FOS embedded into material for the mechanical state monitoring of civil structures	925-932
González-Velázquez, J. L. / Entezari, E.	On the assessment of non-metallic inclusions by part 13 of API 579 -1/ASME FFS-1 2016	221-228
Toribio, Jesús / Ayaso, Francisco-Javier	On the cleavage hoop stress responsible for crack path deflection and notch-induced anisotropic fracture in cold drawn pearlitic steel: Revisiting John Ford’s Monument Valley	1219-1224
Saatsakis, George / Linardatos, Dionysios / Karpetas, George / Kalyvas, Nektarios / Ninos, Konstantinos / Bakas, Athanasios / Lavdas, Eleftherios / Fountos, George / Kandarakis, Ioannis / Valais, Ioannis / Michail, Christos	On the thermal response of LuAG:Ce single crystals	287-294
Mallor, C. / Calvo, S. / Núñez, J. L. / Rodríguez-Barrachina, R. / Landaberea, A.	On the use of probabilistic fatigue life estimation in defining inspection intervals for railway axles	391-401
Gouya, Anass / Jikal, Abdeljalil / Chaffoui, Hassan	Optimization of Parameters on the Failure Stress Behavior of Strands by Taguchi’s Method	215-220
Costanza, Girolamo / Khoshnaw, Fuad / Tata, Maria Elisa / Mehta, Kush	An overview on laser welding of metal foams: techniques, advantages and challenges	544-555
Toribio, Jesús	Painting and Fracture Mechanics	1187-1192
Freddi, Francesco / Mingazzi, Lorenzo	Phase-field simulations of cover cracking in corroded RC beams	371-384
Nykyforchyn, Hryhoriy / Unigovskyi, Leonid / Zvirko, Olha / Tsyrulnyk, Oleksandr / Krechkovska, Halyna	Pipeline durability and integrity issues at hydrogen transport via natural gas distribution network	646-651
Toribio, Jesús	Poetry and Fracture Mechanics	1193-1196
Akçay, Fuzuli Ağrı	Prediction of Ductile Fracture Loci of Aluminum Alloys and Structural Steels Using KAEB Concept and MSS Criterion	279-286
Kaklis, K. / Saubi, O. / Jamisola, R. / Agioutantis, Z.	A preliminary application of a machine learning model for the prediction of the load variation in three-point bending tests based on acoustic emission signals	251-258
Leoni, Francesco / Ferro, Paolo / Berto, Filippo	Preliminary Finite Element assessment of residual stresses in dissimilar AA6082-S355 butt welded joints produced with the Hybrid Metal Extrusion and Bonding (HYB) technique	704-713
Celotto, Ambra / Grong, Øystein / Holmestad, Randi / Sørhaug, Jørgen A. / Torgersen, Jan / Vullum, Per Erik / Berto, Filippo	Preliminary in-situ study of FIB-assisted method for aluminium solid-state welding at the microscale	887-895
Xu, Zhuo / Medori, Elena / Sarasini, Fabrizio / Razavi, Seyed Mohammad Javad	Quasi-static behavior of 3D printed lattice structures of various scales	578-585
Risitano, Giacomo / Guglielmino, Eugenio / Santonocito, Dario	Rapid Energetic Approaches for the Fatigue Limit assessment in a medium carbon steel	748-756
Arum Fanani, Elvira Wahyu / Surojo, Eko / Prabowo, Aditya Rio / Ariawan, Dody / Akbar, Hammar Ilham	Recent Development in Aluminum Matrix Composite Forging: Effect on the Mechanical and Physical Properties	3-10
Ardika, Rizki Dwi / Triyono, Teguh / Muhayat, Nurul	A review porosity in aluminum welding	171-180
Zaidi, Radzeya / Kozak, Dražan / Sedmak, Aleksandar / Kirin, Snežana / Franulović, Marina	Risk assessment based on analytical evaluation of structural integrity and life of drilling rig pipe	1181-1186
Xu, Zhuo / Fostervold, Rakel / Razavi, Seyed Mohammad Javad	Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling	564-570
Bannikova, Irina A. / Uvarov, Sergey V.	Scaling laws in fragmentation dynamics of rock materials	357-364
Azadi, Mohammad / Aroo, Hanieh	Sensitivity analysis of stress, pre-corrosion, nano-particles and heat treatment on fatigue lifetime of aluminum alloy	181-188
Ferro, Paolo / Berto, Filippo / Meneghello, Roberto	Setup of a numerical model for Post Welding Heat Treatment simulation of steel joints	198-206
Sgambitterra, Emanuele / Curcio, Elio / Rodinò, Stefano / Renzo, Danilo / Magarò, Pietro / Furgiuele, Franco / Brandizzi, Marco / Maletta, Carmine	Shape memory alloys-polymer composites: interfacial strength under mechanical and thermal loading	1073-1081
Ramalho, A. L. / Antunes, F. V. / Ferreira, J. A. M.	Simulation of crack growth in T-welded joints - residual stress field effect	320-329
Sérgio, E. R. / Borges, M. F. / Neto, D. M. / Antunes, F. V. / Pais, J. P.	Single overloads FCG modeling considering damage accumulation	1019-1026
Cicero, Sergio / Arrieta, Sergio	Some thoughts about the application of the Master Curve methodology to ferritic steels containing notches	84-88
Oie, Naoya / Kawabata, Tomoya / Kishiki, Shoichi / Nakagomi, Tadao	Specimen size effect on the brittle fracture properties of steel for buildings subjected to large earthquakes	586-597
Correas, A. Chao / Corrado, M. / Sapora, A. / Cornetti, P.	Spherical voids by finite fracture mechanics	788-794
Pranno, Andrea / Greco, Fabrizio / Luciano, Raimondo / Leonetti, Lorenzo / De Maio, Umberto	Stability analysis at the micro- and macro-scales in periodic bioinspired composites	1103-1114
Song, Wei / Sun, Xinyu / Liu, Xuesong / Wang, Ping / Liu, Yong / Berto, Filippo	Strength mismatch effect on residual stress of high strength steel butt-welded joints	795-801
Pozhylenkov, O. / Vaysfeld, N. / Protserov, Y.	Stress state of an elastic rectangular domain under steady load	385-390
Majid, Imam Abdul / Laksono, Fajar Budi / Suryanto, Hendri / Prabowo, Aditya Rio	Structural Assessment of Ladder Frame Chassis using FE Analysis: A Designed Construction referring to Ford AC Cobra	35-42
Widiyanto, Ilham / Sutimin, Sutimin / Laksono, Fajar Budi / Prabowo, Aditya Rio	Structural Assessment of Monocoque Frame Construction using Finite Element Analysis: A Study Case on a Designed Vehicle Chassis referring to Ford GT40	27-34
Deligia, M. / Congiu, E. / Marano, G. C. / Briseghella, B. / Fenu, L.	Structural optimization of composite steel trussed-concrete beams	613-622
Suiffi, Hassan / Maliki, Anas El / Cherkaoui, Omar / Dalal, Mohamed	Study of the durability of concrete mixed with polypropylene fibers	229-236
Bannikova, Irina A. / Uvarov, Sergey V. / Bayandin, Yuriy V.	Surfactant solutions behavior under electric explosion wire loading	1146-1151
Xu, Zhuo / Fostervold, Rakel / Razavi, Seyed Mohammad Javad	Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling	571-577
Evstafeva, I. A. / Pronina, Y. G.	A thin-walled pipe exposed to corrosion under pressure and nonuniform heating	933-941
Teke, Ibrahim T. / Akbulut, Mustafa / Ertas, Ahmet H.	Topology optimization and fatigue analysis of a lifting hook	75-83
Fedulov, Boris / Fedorenko, Alexey	Topology optimization with space orientation of reinforcement	843-849
Toribio, Jesús	Triaxiality effects on hydrogen-assisted micro-damage (HAMD), notch tensile strength and hydrogen embrittlement of pearlitic steel	1139-1145
D’Andrea, Danilo / Pistone, Alessandro / Risitano, Giacomo / Santonocito, Dario / Scappaticci, Lorenzo / Alberti, Fabio	Tribological characterization of a hip prosthesis in Si3N4-TiN ceramic composite made with Electrical Discharge Machining (EDM)	469-481
Ruiz Vilchez, Julio A. / Dominguez Almaraz, Gonzalo M. / Sánchez Miranda, Mario A.	Ultrasonic Fatigue Endurance of the Maraging 300 Steel	658-664
Fajri, Aprianur / Prabowo, Aditya Rio / Surojo, Eko / Imaduddin, Fitrian / Sohn, Jung Min / Adiputra, Ristiyanto	Validation and Verification of Fatigue Assessment using FE Analysis: A Study Case on the Notched Cantilever Beam	11-18

About this
data sheet
IssueID
60198
Published on:
04/12/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Procedia Structural Integrity - 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Procedia Structural Integrity - 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.