Procedia Structural Integrity - 2021

Publié:	2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Brunner, Andreas J. / Warnet, Laurent / Blackman, Bamber R. K.	35 years of standardization and research on fracture of polymers, polymer composites and adhesives in ESIS TC4: Past achievements and future directions	443-455
Fedorenko, Alexey / Fedulov, Boris / Jurgenson, Sergey / Lomakin, Evgeny	3D lattice-based structural elements for industrial application	652-657
Ibraheem, Anas / Pronina, Yulia	Accounting for shallow foundation settlement in the analysis and design of multi-storey frame buildings: Development of a new software package	942-953
Bellini, Costanzo / Berto, Filippo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia / Razavi, Javad	Additive manufacturing processes for metals and effects of defects on mechanical strength: a review	498-508
Smirnov, Sergey / Konovalov, Dmitry / Veretennikova, Irina / Pestov, Aleksander	Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State	259-264
Rizov, Victor	Analysis of delaminated multilayered functionally graded viscoelastic beam	402-415
Mirzaei, A. M. / Sapora, A. / Corrado, M. / Cornetti, P.	An Analytical Study for Debonding in Single-lap Shear Test by Considering the Residual Strength	982-988
Linardatos, Dionysios / Koukou, Vaia / Martini, Niki / Konstantinidis, Anastasios / Bakas, Athanasios / Fountos, George / Valais, Ioannis / Michail, Christos	Assessing the Information Content of a Non-Destructive Testing CMOS Imaging Detector	304-311
Akbar, Muhammad Sabiqulkhair / Prabowo, Aditya Rio / Prija Tjahjana, Dominicus Danardono Dwi / Laksono, Fajar Budi / Baek, Seung Jung	Assessment of Designed Midship Section Structures subjected to the Hydrostatic and Hydrodynamic Loads: A Convergence Study	67-74
Sánchez, Marcos / Cicero, Sergio / Arroyo, Borja	Assessment of notched Polyvinyl chloride (PVC) tubular beams using the Theory of Critical Distances and Finite Element analysis	97-106
Di Trapani, Fabio / Tomaselli, Giovanni / Vizzino, Alessandro / Bertagnoli, Gabriele	Assessment of out-of-plane strength of masonry infills through a FE augmented dataset	896-906
Dzulfiqar, Muhammad Faiz / Prabowo, Aditya Rio / Ridwan, Ridwan / Nubli, Haris	Assessment on the Designed Structural Frame of the Automatic Thickness Checking Machine – Numerical Validation in FE method	59-66
Nobile, R. / Panella, F. W. / Pirinu, A. / Saponaro, A.	Bending residual strength of damaged Al foam sandwiches through UT and IRT analyses	685-694
Toribio, Jesús	Broadening the Amplitude in the Definition of Structural Integrity: A Tribute to Galileo Galilei	1123-1130
Bellini, Costanzo / Di Cocco, Vittorio / Iacoviello, Francesco / Mocanu, Larisa Patricia	CFRP/aluminium fibre metal laminates: numerical model for mechanical properties simulation	824-831
Toribio, Jesús	Cinema and Fracture Mechanics	1197-1202
Sapora, A. / Efremidis, G. / Cornetti, P.	Comparison between two nonlocal criteria: A case study on pressurized holes	456-464
Tretyakova, Tatyana / Tretyakov, Mikhail / Feklistova, Evgenia	Complex study of the Portevin-Le Chatelier effect by uniaxial tension of axisymmetric specimens with ring concentrators of various geometries	1013-1018
Brito, R. F. N. / Campilho, R. D. S. G. / Moreira, R. D. F. / Sánchez-Arce, I. J. / Silva, F. J. G.	Composite stepped-lap adhesive joint analysis by cohesive zone modelling	665-672
Tretyakov, M. P. / Wildemann, V. E. / Tretyakova, T. V. / Safronov, S. A.	Computational and experimental study of strain localization processes on the postcritical stage of deformation	871-877
Alberini, Riccardo / Spagnoli, Andrea / Terzano, Michele / Raposio, Edoardo	Computational mechanical modeling of human skin for the simulation of reconstructive surgery procedures	556-563
Palumbo, Davide / Finis, Rosa De / Carolo, Francesca Di / Galietti, Umberto	Considerations on the Thermoelastic Effect in proximity of crack tips on Titanium and Aluminium: a new formulation	528-543
Di Trapani, Fabio / Sberna, Antonio Pio / Marano, Giuseppe Carlo	Cost and EAL based optimization for seismic reinforcement of RC structures	917-924
Di Cocco, V. / Bellini, C. / Iacoviello, F. / Mocanu, L.P / Berto, F. / Panetta, R.	Cycling model for a NiTi Shape Memory Alloy	1035-1041
Caivano, Riccardo / Tridello, Andrea / Paolino, Davide / Berto, Filippo	Defect-Driven Topology Optimisation: TopFat algorithm extended to commercial software for wide-ranging applications	1095-1102
Sanjaya, Yuwana / Prabowo, Aditya Rio / Imaduddin, Fitrian / Binti Nordin, Nur Azmah	Design and Analysis of Mesh Size Subjected to Wheel Rim Convergence Using Finite Element Method	51-58
Hachimi, Taoufik / Naboulsi, Nassima / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan	Design and Manufacturing of a 3D printer filaments extruder	907-916
Hayashi, Saki / Kawabata, Tomoya / Yoshimoto, Masayuki / Yamamoto, Masayuki	Deterioration of HAZ toughness by residual Sn and Determination of its Allowable Content for Electric Furnace Steels	1162-1172
Martini, Niki / Koukou, Vaia / Michail, Christos / Fountos, George	Dual Energy X-ray Method for Kidney Stones and Atherosclerotic Plaques Structural Integrity Characterization	295-303
Uvarov, Sergey / Chudinov, Vasiliy	Dynamic and quasistatic interlaminar shear strength of carbon fiber laminate under bi-axial loading conditions	465-468
Fesenko, Anna / Vaysfel’d, Natalya	The dynamical problem for the infinite elastic layer with a cylindrical cavity	509-527
Mysov, K. / Vaysfeld, N.	The dynamical stress concentration near a cone-shaped crack in a twice-truncated elastic cone	365-370
Pilone, D. / Mondal, A. / Felli, F.	Effect of dispersed particles on TiAl alloys fracture behavior	245-250
Martínez, Víctor / Cicero, Sergio / Arroyo, Borja	Effect of graphene on the fracture behaviour of 3D printed PLA SENB specimens	89-96
Mondal, A. / Pilone, D. / Brotzu, A. / Felli, F.	Effect of heat treatment on mechanical properties of FeMnAlC alloys	237-244
Vigna, Lorenzo / Calzolari, Andrea / Galizia, Giuseppe / Belingardi, Giovanni / Paolino, Davide Salvatore	Effect of impact speed and friction on the in-plane crashworthiness of composite plates	623-629
Tonolini, Pietro / Montesano, Lorenzo / Pola, Annalisa / Landriani, Ettore / Gelfi, Marcello	The effect of laser-cladding on the wear behavior of gray cast iron brake disc	1152-1161
Jesus, Joel / Neto, DM / Fernandes, RF / Borges, MF / Antunes, FV / Sérgio, ER	Effect of remaining ligament on fatigue crack growth	598-604
Okulova, D. D. / Sedova, O. S. / Pronina, Yu. G.	The Effect of Surface Defects Interaction on the Strength of a Pressurised Spherical Shell	1055-1064
Ammendolea, Domenico / Greco, Fabrizio / Lonetti, Paolo / Pascuzzo, Arturo	An effective modeling approach based on the ALE and M-integral for simulating crack propagation under thermo-mechanical loadings	858-870
Tyutin, M. R. / Botvina, L. R. / Ioffe, A. V.	Effects of long-term operation on mechanical and physical characteristics of structural materials	765-772
Rizov, Victor	Effects of strain recovery on longitudinal fracture in continuously inhomogeneous viscoelastic beams	416-427
Toribio, Jesús / Ayaso, Francisco-Javier / Rodríguez, Rocío	Evolution of non-metallic inclusions with cold drawing in progressively cold drawn eutectoid pearlitic steel wires	1209-1214
Freeman, Ashley Amanda / Wan, Di / Bertolin, Chiara	Examining the effect of indentation separation on the properties of proteinaceous adhesive films made bone gelatine	265-278
Beibei, Xiong / Devid, Falliano / Carlo, Marano Giuseppe / Luciana, Restuccia / Fabio, Di Trapani / Andrea, Ferro Giuseppe	Experimental Characterization of Mortar with Recycled PET Aggregate: Preliminary Results	1027-1034
Pittau, Fabrizio / Doveri, Fabiuo / Puppio, Mario Lucio / Stochino, Flavio / Mistretta, Fausto / Sassu, Mauro	Experimental tests on vapor and gas permeability of concrete boxes	630-645
Triantis, Dimos / Stavrakas, Ilias / Loukidis, Andronikos / Pasiou, Ermioni D. / Kourkoulis, Stavros K.	Exploring the acoustic activity in marble specimens under tension while entering into the stage of impending fracture	330-336
Fajri, Aprianur / Prabowo, Aditya Rio / Muhayat, Nurul / Smaradhana, Dharu Feby / Bahatmaka, Aldias	Fatigue Analysis of Engineering Structures: State of Development and Achievement	19-26
Song, Wei / Li, Jingjing / Liu, Xuesong / Wang, Ping / Wan, Di / Berto, Filippo	Fatigue crack growth rates of 10CrNi3MoV steel welded joints considering the stress ratio	802-808
Santonocito, Dario / Cucinotta, Filippo / Guglielmino, Eugenio / Risitano, Giacomo	Fatigue damage assessment of welded HDPE details evaluating their energy release	724-733
Paiva, Vitor E. L. / Gonzáles, Giancarlo L. G. / Vieira, Ronaldo D. / Ribeiro, Alexandre S. / d’Almeida, Ana L. F. S. / Freire, José L. F.	Fatigue of buried dented pipeline specimens	159-170
Žlábek, Pavel / Koščo, Tomáš / Semeš, Marián	Fatigue properties of weld joint of gas pipelines	1007-1012
Vantadori, Sabrina / Carpinteri, Andrea / Ronchei, Camilla / Scorza, Daniela / Zanichelli, Andrea	Fatigue strength evaluation and lifetime estimation for ductile cast irons under multiaxial loading	773-780
Braet, Lucas / Juhászová, Tereza / Jindra, Daniel / Miarka, Petr / Seitl, Stanislav	Finding the optimal stress state of a stainless-steel IPE profile for fatigue experiments	1065-1072
De Maio, Umberto / Cendón, David / Greco, Fabrizio / Leonetti, Lorenzo / Nevone Blasi, Paolo / Pranno, Andrea	Finite element analysis of concrete cracking: a comparative study between a diffuse interface model and an embedded crack model	954-965
Milone, Dario / Nicita, Fabiana / Cervino, Gabriele / Santonocito, Dario / Risitano, Giacomo	Finite Element Analysis of OT Bridge fixed prosthesis system	734-747
Foti, Pietro / Razavi, Seyed Mohammad Javad / Berto, Filippo	Fracture assessment of U-notched PMMA under mixed mode I/II loading conditions by means of local approaches.	482-490
Djordjevic, Branislav / Petrovski, Blagoj / Sedmak, Aleksandar / Kozak, Dražan / Samardzic, Ivan	Fracture behavior of reactor steel 20MnMoNi 55 in the transition temperature region	781-787
Toribio, Jesús / Ayaso, Francisco-Javier / González, Beatriz / Rodríguez, Rocío	Fracture behaviour of high-strength cold-drawn pearlitic steel wires: The role of non-metallic inclusions	1203-1208
Naimark, O. B. / Uvarov, S. V. / Nikityuk, A. S. / Kirsanov, A. R.	Fracture Criteria and Duality of Critical Damage-Failure Transitions	1115-1122
Šimonová, Hana / Lipowczan, Martin / Rozsypalová, Iva / Daněk, Petr / Lehký, David / Rovnaníková, Pavla / Keršner, Zbynĕk	Fracture parameters of alkali-activated aluminosilicate composites with ceramic precursor: durability aspects	207-214
Abrami, Maria Beatrice / Montesano, Lorenzo / Tocci, Marialaura / Pola, Annalisa / Gelfi, Marcello	High Temperature Wear Behavior of AlMgScZr Alloy Produced By Laser Powder Bed Fusion	878-886
Silva, A. F. M. V. / Peres, L. M. C. / Campilho, R. D. S. G. / Rocha, R. J. B.	Impact loading analysis of tubular adhesive joints	138-148
Ferro, Paolo / Fabrizi, Alberto / Bonollo, Franco / Berto, Filippo	Influence of aluminum casting alloys chemical composition on the interaction with a 304L stainless steel insert	189-197
Schoenborn, S. / Melz, T. / Baumgartner, J. / Bleicher, C.	Influence of compressed hydrogen on the fatigue behavior of a ferritic stainless steel	757-764
Vyhlídal, Michal / Rozsypalová, Iva / Šimonová, Hana / Kucharczyková, Barbara / Vavro, Leona / Vavro, Martin / Němeček, Jiří / Rovnaníková, Pavla / Keršner, Zbynĕk	Influence of rock inclusion composition on the fracture response of cement-based composite specimens	966-981
Malikova, Lucie / Miarka, Petr / Doubek, Pavel / Seitl, Stanislav	Influence of the bi-material interface on the crack propagation through a thin protective layer	605-612
Tretyakov, M. P. / Tretyakova, T. V. / Wildemann, V. E.	Influence of the loading system stiffness on the jerky flow in Al-Mg alloy at inelastic and postcritical deformation stages	1089-1094
Tretyakova, Tatyana / Tretyakov, Mikhail	Influence of the non-monotonic loading and short stops on the regularities of the jerky flow in the Al-Mg alloy	1082-1088
Boursier Niutta, C. / Tridello, A. / Belingardi, G. / Paolino, D. S.	An innovative nondestructive technique for the local assessment of residual elastic properties in laminated composites	347-356
Yagi, Toru / Imai, Yasuhito / Kawabata, Tomoya	Investigation of Pop-in Formation Mechanism in Fracture Toughness Test of Welded Joint and Revision of Acceptance Criteria	1225-1234
Prasetyo, Singgih Dwi / Istanto, Iwan / Cho, Joung Hyung / Prabowo, Aditya Rio	Investigation of Sulfur Melter Heating Coil as an Industrial Product: A Study Case on Technical Design and Structural Inspection	43-50
Wang, Zhen / Manes, Andrea	Investigation of the biaxial flexural fracture of aluminosilicate glass by smeared fixed crack method	337-346
Kansy, A. / Kaynak, M. / Bleicher, C. / Kaufmann, H.	Investigation of the statistical and geometrical size effect on the fatigue strength of EN-GJL-300 under consideration of the graphite morphology	1173-1180
Rizov, Victor	Lengthwise fracture of functionally graded beams: a study of stress relaxation effects	428-442
Lomakin, Evgeny / Fedulov, Boris	Limit plastic state of notched solids with properties dependent on the type of external forces	809-817
Matvienko, Yu. / Pisarev, V. / Eleonsky, S.	Low-cycle fatigue damage accumulation near cold-expanded hole by secondary hole drilling data	491-497
Toribio, Jesús	Macro- and micro-approach to the notch-induced fracture process and notch tensile strength in eutectoid hot-rolled pearlitic steel: Weakest Link versus Process Zone Fracture Criterion	1131-1138
Sánchez-Arce, I. J. / Gonçalves, D. C. / Ramalho, L. D. C. / Campilho, R. D. S. G. / Belinha, J.	Meshless and hyper-elastic implementation to analyse flexible adhesives	149-158
Resende, R. F. P. / Resende, B. F. P. / Sánchez-Arce, I. J. / Gonçalves, D. C. / Ramalho, L. D. C. / Campilho, R. D. S. G. / Belinha, J.	Meshless approach to material plasticity in adhesive joints	126-137
Sami, Derouiche / Salah, Bouziane / Hamoudi, Bouzerd	Mixed Finite Element for Kinking Crack Analysis in an Orthotropic Media	996-1006
Seitl, Stanislav / Andrade Lizarro, Julian Z. / Miarka, Petr	Mixed Mode I/II Fracture Resistance of Various Civil Engineering Materials by Selected Criteria	312-319
Jamali, Jamaloddin / Ashknani, Ahmad / Al-Kanderi, Ali / Hussain, Fajer	Mode I Fracture Testing of polyester	832-842
Naboulsi, Nassima / Hachimi, Taoufik / Majid, Fatima / Rhanim, Rajae / Zekriti, Najat / Rhanim, Hassan	Modeling and control of 3D filament extruder	989-995
Sánchez, Marcos / Cicero, Sergio	Multi-wall carbon nanotubes do not necessarily improve the fracture behaviour of the epoxy matrix	107-114
Ricotta, Mauro / Sorgato, Marco / Zappalorto, Michele	Notch Effect in the Tensile Quasi-Static Behaviour of 40% Short Glass Fibre - PPS Reinforced Composites	695-703
Faria, R. V. F. / Campilho, R. D. S. G. / Gonçalves, P. J. A. / Rocha, R. J. B. / Sánchez-Arce, I. J. / Silva, F. J. G.	Numerical analysis by XFEM of hybrid T-peel joints	673-684
Rosas, M. F. M. O. / Campilho, R. D. S. G. / Moreira, R. D. F.	Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesive joints	115-125
Lymperopoulos, Panagiotis N. / Theotokoglou, Efstathios E.	Numerical investigation of pentamodes crack propagation	818-823
Toribio, Jesús / González, Beatriz / Matos, Juan-Carlos	Numerical modeling of hydrogen embrittlement of pearlitic steel in the presence of blunt notches	1215-1218
Ripa, M. Della / Paolino, D. S. / Amorese, A. / Tridello, A.	Numerical modelling of the mechanical response of lattice structures produced through AM	714-723
Gaetano, Daniele / Greco, Fabrizio / Leonetti, Lorenzo / Lonetti, Paolo / Nevone Blasi, Paolo	Numerical prediction of transverse cracking and delamination in fiber-reinforced laminates by using a two-scale cohesive finite element approach	1042-1054
Aranđelović, M. / Sedmak, S. / Jovicic, R. / Kozak, D. / Đorđević, B.	Numerical simulation of crack growth in a welded joint with defects	850-857
Matveenko, V. P. / Serovaev, G. S. / Kosheleva, N. A. / Gusev, G. N.	On application of distributed FOS embedded into material for the mechanical state monitoring of civil structures	925-932
González-Velázquez, J. L. / Entezari, E.	On the assessment of non-metallic inclusions by part 13 of API 579 -1/ASME FFS-1 2016	221-228
Toribio, Jesús / Ayaso, Francisco-Javier	On the cleavage hoop stress responsible for crack path deflection and notch-induced anisotropic fracture in cold drawn pearlitic steel: Revisiting John Ford’s Monument Valley	1219-1224
Saatsakis, George / Linardatos, Dionysios / Karpetas, George / Kalyvas, Nektarios / Ninos, Konstantinos / Bakas, Athanasios / Lavdas, Eleftherios / Fountos, George / Kandarakis, Ioannis / Valais, Ioannis / Michail, Christos	On the thermal response of LuAG:Ce single crystals	287-294
Mallor, C. / Calvo, S. / Núñez, J. L. / Rodríguez-Barrachina, R. / Landaberea, A.	On the use of probabilistic fatigue life estimation in defining inspection intervals for railway axles	391-401
Gouya, Anass / Jikal, Abdeljalil / Chaffoui, Hassan	Optimization of Parameters on the Failure Stress Behavior of Strands by Taguchi’s Method	215-220
Costanza, Girolamo / Khoshnaw, Fuad / Tata, Maria Elisa / Mehta, Kush	An overview on laser welding of metal foams: techniques, advantages and challenges	544-555
Toribio, Jesús	Painting and Fracture Mechanics	1187-1192
Freddi, Francesco / Mingazzi, Lorenzo	Phase-field simulations of cover cracking in corroded RC beams	371-384
Nykyforchyn, Hryhoriy / Unigovskyi, Leonid / Zvirko, Olha / Tsyrulnyk, Oleksandr / Krechkovska, Halyna	Pipeline durability and integrity issues at hydrogen transport via natural gas distribution network	646-651
Toribio, Jesús	Poetry and Fracture Mechanics	1193-1196
Akçay, Fuzuli Ağrı	Prediction of Ductile Fracture Loci of Aluminum Alloys and Structural Steels Using KAEB Concept and MSS Criterion	279-286
Kaklis, K. / Saubi, O. / Jamisola, R. / Agioutantis, Z.	A preliminary application of a machine learning model for the prediction of the load variation in three-point bending tests based on acoustic emission signals	251-258
Leoni, Francesco / Ferro, Paolo / Berto, Filippo	Preliminary Finite Element assessment of residual stresses in dissimilar AA6082-S355 butt welded joints produced with the Hybrid Metal Extrusion and Bonding (HYB) technique	704-713
Celotto, Ambra / Grong, Øystein / Holmestad, Randi / Sørhaug, Jørgen A. / Torgersen, Jan / Vullum, Per Erik / Berto, Filippo	Preliminary in-situ study of FIB-assisted method for aluminium solid-state welding at the microscale	887-895
Xu, Zhuo / Medori, Elena / Sarasini, Fabrizio / Razavi, Seyed Mohammad Javad	Quasi-static behavior of 3D printed lattice structures of various scales	578-585
Risitano, Giacomo / Guglielmino, Eugenio / Santonocito, Dario	Rapid Energetic Approaches for the Fatigue Limit assessment in a medium carbon steel	748-756
Arum Fanani, Elvira Wahyu / Surojo, Eko / Prabowo, Aditya Rio / Ariawan, Dody / Akbar, Hammar Ilham	Recent Development in Aluminum Matrix Composite Forging: Effect on the Mechanical and Physical Properties	3-10
Ardika, Rizki Dwi / Triyono, Teguh / Muhayat, Nurul	A review porosity in aluminum welding	171-180
Zaidi, Radzeya / Kozak, Dražan / Sedmak, Aleksandar / Kirin, Snežana / Franulović, Marina	Risk assessment based on analytical evaluation of structural integrity and life of drilling rig pipe	1181-1186
Xu, Zhuo / Fostervold, Rakel / Razavi, Seyed Mohammad Javad	Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling	564-570
Bannikova, Irina A. / Uvarov, Sergey V.	Scaling laws in fragmentation dynamics of rock materials	357-364
Azadi, Mohammad / Aroo, Hanieh	Sensitivity analysis of stress, pre-corrosion, nano-particles and heat treatment on fatigue lifetime of aluminum alloy	181-188
Ferro, Paolo / Berto, Filippo / Meneghello, Roberto	Setup of a numerical model for Post Welding Heat Treatment simulation of steel joints	198-206
Sgambitterra, Emanuele / Curcio, Elio / Rodinò, Stefano / Renzo, Danilo / Magarò, Pietro / Furgiuele, Franco / Brandizzi, Marco / Maletta, Carmine	Shape memory alloys-polymer composites: interfacial strength under mechanical and thermal loading	1073-1081
Ramalho, A. L. / Antunes, F. V. / Ferreira, J. A. M.	Simulation of crack growth in T-welded joints - residual stress field effect	320-329
Sérgio, E. R. / Borges, M. F. / Neto, D. M. / Antunes, F. V. / Pais, J. P.	Single overloads FCG modeling considering damage accumulation	1019-1026
Cicero, Sergio / Arrieta, Sergio	Some thoughts about the application of the Master Curve methodology to ferritic steels containing notches	84-88
Oie, Naoya / Kawabata, Tomoya / Kishiki, Shoichi / Nakagomi, Tadao	Specimen size effect on the brittle fracture properties of steel for buildings subjected to large earthquakes	586-597
Correas, A. Chao / Corrado, M. / Sapora, A. / Cornetti, P.	Spherical voids by finite fracture mechanics	788-794
Pranno, Andrea / Greco, Fabrizio / Luciano, Raimondo / Leonetti, Lorenzo / De Maio, Umberto	Stability analysis at the micro- and macro-scales in periodic bioinspired composites	1103-1114
Song, Wei / Sun, Xinyu / Liu, Xuesong / Wang, Ping / Liu, Yong / Berto, Filippo	Strength mismatch effect on residual stress of high strength steel butt-welded joints	795-801
Pozhylenkov, O. / Vaysfeld, N. / Protserov, Y.	Stress state of an elastic rectangular domain under steady load	385-390
Majid, Imam Abdul / Laksono, Fajar Budi / Suryanto, Hendri / Prabowo, Aditya Rio	Structural Assessment of Ladder Frame Chassis using FE Analysis: A Designed Construction referring to Ford AC Cobra	35-42
Widiyanto, Ilham / Sutimin, Sutimin / Laksono, Fajar Budi / Prabowo, Aditya Rio	Structural Assessment of Monocoque Frame Construction using Finite Element Analysis: A Study Case on a Designed Vehicle Chassis referring to Ford GT40	27-34
Deligia, M. / Congiu, E. / Marano, G. C. / Briseghella, B. / Fenu, L.	Structural optimization of composite steel trussed-concrete beams	613-622
Suiffi, Hassan / Maliki, Anas El / Cherkaoui, Omar / Dalal, Mohamed	Study of the durability of concrete mixed with polypropylene fibers	229-236
Bannikova, Irina A. / Uvarov, Sergey V. / Bayandin, Yuriy V.	Surfactant solutions behavior under electric explosion wire loading	1146-1151
Xu, Zhuo / Fostervold, Rakel / Razavi, Seyed Mohammad Javad	Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling	571-577
Evstafeva, I. A. / Pronina, Y. G.	A thin-walled pipe exposed to corrosion under pressure and nonuniform heating	933-941
Teke, Ibrahim T. / Akbulut, Mustafa / Ertas, Ahmet H.	Topology optimization and fatigue analysis of a lifting hook	75-83
Fedulov, Boris / Fedorenko, Alexey	Topology optimization with space orientation of reinforcement	843-849
Toribio, Jesús	Triaxiality effects on hydrogen-assisted micro-damage (HAMD), notch tensile strength and hydrogen embrittlement of pearlitic steel	1139-1145
D’Andrea, Danilo / Pistone, Alessandro / Risitano, Giacomo / Santonocito, Dario / Scappaticci, Lorenzo / Alberti, Fabio	Tribological characterization of a hip prosthesis in Si3N4-TiN ceramic composite made with Electrical Discharge Machining (EDM)	469-481
Ruiz Vilchez, Julio A. / Dominguez Almaraz, Gonzalo M. / Sánchez Miranda, Mario A.	Ultrasonic Fatigue Endurance of the Maraging 300 Steel	658-664
Fajri, Aprianur / Prabowo, Aditya Rio / Surojo, Eko / Imaduddin, Fitrian / Sohn, Jung Min / Adiputra, Ristiyanto	Validation and Verification of Fatigue Assessment using FE Analysis: A Study Case on the Notched Cantilever Beam	11-18

Informations
sur cette fiche
IssueID
60198
Publié(e) le:
04.12.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.