Procedia Structural Integrity - 2018

Published:	2018

Articles in this Issue

Author(s)	Title	Page(s)
Laiarinandrasana, L. / Selles, N. / Cheng, Y. / Helfen, L. / Morgeneyer, T. F.	3D Stress Fields Versus Void Distributions Ahead Of a Notch Tip For Semi-crystalline Polymers	1751-1755
Charles, Y. / Gaspérini, M. / Ardon, K. / Ayadi, S. / Benannoune, S. / Mougenot, J.	Adaptation of hydrogen transport models at the polycrystal scale and application to the U-bend test	896-901
Le, Tuan Duc / Lehner, Petr / Konečný, Petr	Advanced Model of Chloride Penetration Considering Concrete Heterogeneity	1702-1707
Khosla, Guy / Balint, Daniel / Farrugia, Didier / Hole, Matthew / Davies, Catrin M.	Analysis of an as-cast high Si slab to elucidate fundamental causes of the fracture mechanism: Clinking	1447-1452
Nový, F. / Jambor, M. / Trško, L. / Palček, P. / Bokůvka, O.	Analysis of causes of a locomotive draw hook brittle fracture	2170-2173
Uhríčik, Milan / Oravcová, Monika / Palček, Peter / Oršulová, Tatiana / Kuchariková, Lenka / Nikolić, Ružica	Analysis of dependence of internal damping on temperature of austenitic steels	1571-1576
Aibara, Masataka / Koyama, Motomichi / Hamada, Shigeru / Noguchi, Hiroshi	Analysis of fatigue crack configuration influence on fatigue life	1148-1153
Sakamoto, Junji / Shibutani, Tadahiro	Analysis of fatigue damage of aluminium alloy under multiaxial random vibration	529-534
Kruzel, Robert / Ulewicz, Malgorzata	Analysis of fatigue life of the steel cord used in tires in unidirectional and bidirectional bending	1626-1631
Milosevic, N. / Sedmak, A. / Jovicic, R.	Analysis of strain distribution in overmatching V groove weld using digital image correlation	1600-1604
González, P. / Cicero, S. / Alvarez, J. A. / Arroyo, B.	Analysis of stress corrosion cracking in X80 pipeline steel: An approach from the theory of critical distances	3-10
Rigon, Daniele / Formilan, Vittoria / Meneghetti, Giovanni	Analysis of the energy dissipation in multiaxial fatigue tests of AISI 304L stainless steel bars	1638-1643
Tomaszewski, Tomasz	Analysis of the statistical size effect model with a critical volume in the range of high-cycle fatigue	1756-1761
Al-Shuwaili, Mohammed A.	Analytical investigations to the specimen size effect on the shear resistance of the perfobond shear connector in the push-out test	1924-1931
Naib, Sameera / De Waele, Wim / Štefane, Primož / Gubeljak, Nenad / Hertelé, Stijn	Analytical limit load predictions in heterogeneous welded single edge notched tension specimens	1725-1730
Beswick, J. / Sarzosa, D. / Savioli, R. / James, P. / Ruggieri, C. / Jivkov, AP	Applicability of local approaches to assessment of cleavage fracture in complex constraint and load history cases	63-68
Judt, Paul / Ricoeur, Andreas	Application of material forces and path independent integrals to the prediction of crack initiation and crack paths	155-160
Arai, Masayuki / Yoshida, Kazuki	Application of singular integral equation to crack moving near an inclusion in two-dimensional infinite plate	131-136
Gómez, F. J. / Torabi, A. R.	Application of the equivalent material concept to fracture of U-notched solids under small scale yielding	267-272
Dubyk, Yaroslav / Orynyak, Igor / Yakovleva, Elena	Application of the internal and external Williams functions for stress intensity factors assessment in plane stress problems	1502-1507
Moskvichev, V.	Applied problems of fracture mechanics, resource and safety of technical systems	2114-2119
Neimitz, Andrzej / Galkiewicz, Jaroslaw	Are the mechanical field parameters sufficient to predict uniquely the failure due to the ductile or cleavage mechanisms?	285-291
Merson, E. D. / Danilov, V. A. / Linderov, M. L. / Myagkikh, P. N. / Merson, D. L. / Vinogradov, A.	Assessing Fracture Surface Ductility by Confocal Laser Scanning Microscopy	2152-2157
Razavi, S. M. J. / Ayatollahi, M. R. / Berto, F.	Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation	69-73
Sezgin, Jean-gabriel / Takakuwa, Osamu / Matsunaga, Hisao / Yamabe, Junichiro	Assessment of the contribution of internal pressure to the structural damage in a hydrogen-charged Type 316L austenitic stainless steel during slow strain rate tensile test	1615-1619
McEniry, Eunan J. / Hickel, Tilmann / Neugebauer, Jörg	Atomistic modelling of light-element co-segregation at structural defects in iron	1099-1104
Shardakov, I. / Shestakov, A. / Son, M. / Zemlanuhin, A. / Kashevarova, G. / Glot, I.	Beam to column flange connection: from elasticity to destruction (theory and experiment)	1324-1329
Miletić, Filip / Jovančić, Predrag / Djenadić, Svetan	Behavior Determining of Bucket Wheel Drive Depending on the Wear Impact of the Cutting Elements	1644-1650
Dikova, Tsanka	Bending fracture of Co-Cr dental bridges, produced by additive technologies: experimental investigation	461-468
Zistl, Moritz / Gerke, Steffen / Brünig, Michael	Biaxial experiments on the effect of non-proportional loading paths on damage and fracture behavior of ductile metals	57-62
Torabi, A. R. / Etesam, S. / Sapora, A. / Cornetti, P.	Brazilian disk tests: Circular holes and size effects	596-600
Salem, Ghassen Ben / Chapuliot, Stéphane / Blouin, Arnaud / Bompard, Philippe / Jacquemoud, Clémentine	Brittle fracture analysis of Dissimilar Metal Welds between low-alloy steel and stainless steel at low temperatures	619-624
Neimitz, Andrzej / Dzioba, Ihor / Lipiec, Sebastian	Calibration of constitutive equations for the stress level estimation in domain with the large strains	862-867
Vujović, Vera	Case Study - The Mehmed Pasha Sokolovic Bridge	489-495
Ulewicz, R. / Nový, F. / Novak, P. / Palček, P.	Cause analysis of the train draw hook fatigue failure	2164-2169
Oršulová, Tatiana / Palček, Peter / Roszak, Marek / Uhríčik, Milan / Smetana, Milan / Kúdelčík, Jozef	Change of magnetic properties in austenitic stainless steels due to plastic deformation	1689-1694
Milković, Marijana / Đonlagić, Denis / Gubeljak, Nenad	Change of Residual Stress due Surface Conditions of Al7075-T6	1861-1866
Lindqvist, S. / Seppänen, T.	Characterization of J-R curves of a HSLA-steel and an Alloy 52 DMW with SE(T) specimens	1195-1200
Bülbül, F. / Christ, H.-J. / Wicke, M. / Brückner-Foit, A. / Kirsten, T. / Zimmermann, M.	Characterization of the Long Crack Propagation Behaviour in a Hardenable Aluminium Alloy in Very High Cycle Fatigue Regime	590-595
Khaburskyi, Ya. / Nykyforchyn, H.	Chemical method of fatigue and corrosion fatigue crack growth arrest in steels by metal treatment with the special technological environment	1651-1656
Kitade, Atsuhisa / Kawabata, Tomoya / Kimura, Shintaro / Takatani, Hideaki / Kagehira, Kiyoshi / Mitsuzumi, Tatsuki	Clarification of micromechanism on Brittle Fracture Initiation Condition of TMCP Steel with MA as the trigger point	1845-1854
Talemi, Reza H. / Gilani, Negar / Ngo, Quang Tien / Braga Neto, Antônio de Souza / Willems, Annick	Cleavage fracture assessment of cold charged steel slabs using experimental and numerical approaches	775-780
Petronić, S. / Čolić, K. / Đorđević, B. / Miskovic, Z. / Katnić, Đ. / Vučetić, F.	Comparative Exemination of the Strengthened and Non- Strengthened NIMONIC Specimens with Laser Shot Peening Method	2255-2260
Galić, Ivica / Čular, Ivan / Vučković, Krešimir / Tonković, Zdenko	Comparison of SIF solutions obtained by XFEM and conventional FEM for cracks in complex geometries like valve body	2109-2113
Drdlová, Martina / Čechmánek, René	Comparison of tensile behaviour of polypropylene, aramid and carbon fibre reinforced cementitious composite at high strain rate loading	1731-1738
He, Ran / Zhao, Liguo / Silberschmidt, Vadim V. / Liu, Yang / Vogt, Felix	Computational Evaluation of Artery Damage in Stent Deployment	187-191
Aikawa, Taiko / Aihara, Shuji / Kawabata, Tomoya / Yanagimoto, Fuminori / Shibanuma, Kazuki	Computer simulation of cleavage fracture surface morphologies in steel plates	104-109
Zanichelli, Andrea / Carpinteri, Andrea / Fortese, Giovanni / Ronchei, Camilla / Scorza, Daniela / Vantadori, Sabrina	Contribution of date-palm fibres reinforcement to mortar fracture toughness	542-547
Uenishi, Koji / Sakaguchi, Shintaro / Shigeno, Naoyuki / Yamachi, Hiroshi / Nakamori, Junichiro	Controlled fracture of brittle solid materials based on wave dynamics	652-657
Atzori, Bruno / Ricotta, Mauro / Meneghetti, Giovanni	Correlation among Energy Based Fatigue Curves and Fatigue Design Approaches	1961-1966
Khoma, M. S. / Ivashkiv, V. R. / Chuchman, M. R. / Vasyliv, Ch B. / Ratska, N. B. / Datsko, B. M.	Corrosion cracking of carbon steels of different structure in the hydrogen sulfide environment under static load	2184-2189
Barjaktarević, Dragana / Bajat, Jelena / Cvijović-Alagić, Ivana / Dimić, Ivana / Hohenwarter, Anton / Đokić, Veljko / Rakin, Marko	The corrosion resistance in artificial saliva of titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion	1834-1839
Maksimović, Mirko / Vasović, Ivana / Maksimović, Katarina / Maksimovic, Stevan / Stamenković, Dragi	Crack growth analysis and residual life estimation of structural elements under mixed modes	1888-1894
Tkachenko, Valentin / Nikitin, Alexander / Nikitin, Ilia	Crack growth in titanium alloy under ultrasonic loading	1396-1401
Mehmanparast, Ali / Albani, Pietro / Igwemezie, Victor	Crack growth monitoring in corrosion-fatigue tests using back face strain measurement technique	261-266
Dzindo, Emina / Sedmak, Simon / Radakovic, Zoran / Cvetkovic, Ivana	Crack growth resistance of weldment constituents	420-423
Joy, T. D. / Brüggemann, J.-P. / Kullmer, G.	Crack growth simulation with Adapcrack3D in 3D structures under the influence of temperature	328-333
Šimonová, Hana / Kucharczyková, Barbara / Topolář, Libor / Keršner, Zbynĕk / Merta, Ildiko / Dragaš, Jelena / Ignjatović, Ivan / Komljenović, Miroslav / Nikolić, Violeta	Crack initiation of selected geopolymer mortars with hemp fibers	578-583
Ayatollahi, M. R. / Razavi, S. M. J. / Berto, F.	Crack path stability in brittle fracture under pure mode I loading	735-740
Wood, Joseph D. / Gauvin, Cecilia / Young, Christina R. T. / Taylor, Ambrose C. / Balint, Daniel S. / Charalambides, Maria N.	Cracking in paintings due to relative humidity cycles	379-384
Kostina, A. / Zhelnin, M. / Plekhov, O. / Panteleev, I. / Levin, L.	Creep behavior of ice-soil retaining structure during shaft sinking	1273-1278
Shimada, Takehiro / Tokuda, Kenji / Yoshida, Kimiaki / Ohno, Nobutada / Sasaki, Tatsuya	Creep-Fatigue Life Prediction of 316H Stainless Steel by Utilizing Non-Unified Constitutive Model	1873-1878
Stratula, B. A. / Nikitin, A. D. / Nikitin, I. S.	Critical plane and multiaxial criteria for in-phase and antiphase cyclic loading	1402-1407
Viespoli, L. M. / Mutignani, F. / Remes, H. / Berto, F.	Cruciform welded joints: hot-dip galvanization effect on the fatigue life and local energetic analysis.	340-346
Maenosono, Akira / Koyama, Motomichi / Tanaka, Yoshihisa / Ri, Shien / Wang, Qinghu / Noguchi, Hiroshi	Crystallographic orientation-dependent growth mode of microstructurally fatigue small crack in a laminated Ti–6Al–4V alloy	694-699
Spagnoli, A. / Brighenti, R. / Terzano, M. / Artoni, F. / Ståhle, P.	Cutting resistance of polymeric materials: experimental and theoretical investigation	137-142
Gerke, Steffen / Zistl, Moritz / Schmidt, Marco / Brünig, Michael	Damage and fracture of ductile sheet metal: New biaxially loaded specimens for material parameter identification	39-44
Tanasković, Drakče / Đorđević, Branislav / Gajin, Marko / Aranđelović, Mihajlo / Gostović, Nemanja	Damages of burner pipes due to the working conditions and its repair welding	404-409
Strieška, Miroslav / Koteš, Peter / Sedmak, Aleksandar	Decreasing bridge member´s resistance due to reinforcement corrosion	1745-1750
Damaskinskaya, Ekaterina / Panteleev, Ivan / Gafurova, Dina / Frolov, Dmitry	Defect Structure of Deformed Heterogeneous Materials: Acoustic Emission and X-Ray Microtomography	298-303
Evstifeev, Alexey / Chevrychkina, Anastasiia / Petrov, Yuri / Atrochenko, Svetlana	Dependence of strength characteristics of aluminum alloys on strain rate under tension	886-889
Perić, B. / Simonović, A. / Ivanov, T. / Stupar, S. / Vorkapić, M. / Peković, O. / Svorcan, J.	Design and testing characteristics of thin stainless steel diaphragms	2196-2201
Eldwaib, Khalid / Grbović, Aleksandar / Kastratović, Gordana / Aldarwish, Mustafa	Design of Wing Spar Cross Section for Optimum Fatigue Life	444-449
Ryu, Ho-Wan / Kim, Hune-Tae / Kim, Yun-Jae / Kim, Jin-Weon	Determination of Combined Hardening Parameters to Simulate Deformation Behavior of C(T) Specimen under Cyclic Loading	1932-1939
Arsic, M. / Bosnjak, S. / Gnjatović, N. / Sedmak, S. A. / Arsić, D. / Savic, Z.	Determination of Residual Fatigue Life of Welded Structures at Bucket-Wheel Excavators through the Use of Fracture Mechanics	79-84
Shilko, Evgeny V. / Dimaki, Andrey V. / Smolin, Alexey Yu. / Psakhie, Sergey G.	The determining influence of the competition between pore volume change and fluid filtration on the strength of permeable brittle solids	1508-1513
Mišković, Žarko / Mitrovic, Radivoje / Stamenic, Zoran / Bakic, Gordana M. / Djukic, Milos B. / Rajicic, Bratislav	The development and application of the new methodology for conveyor idlers fits testing	2143-2151
Tatic, Uros / Šubic, Barbara / Ugovšek, Aleš / Starman, Nejc / Gantar, Uros / Lopatic, Joze	Development and testing of the reinforced wooden windows	496-502
Fehringer, Florian / Schuler, Xaver / Seidenfuß, Michael	Development of a damage mechanics based limit strain concept using an enhanced Rousselier model	932-938
Kishi, Kota / Shibanuma, Kazuki / Yanagimoto, Fuminori / Suzuki, Katsuyuki / Matsumoto, Toshiyuki	Development of dynamic mesh superposition method for local tensile stress evaluation	1111-1116
Đurđević, Đorđe / Anđelić, Nina / Maneski, Tasko / Milošević-Mitić, Vesna / Petrović, Ana / Đurđević, Andrijana	Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals	1676-1681
Nishizono, Yuki / Kawabata, Tomoya / Aihara, Shuji	Development of simplified evaluation method of brittle crack arrest toughness on small-scale bending test in steels	1817-1827
Micunovic, Milan / Kudrjavceva, Ljudmila	Diffuse instability of slightly disordered quasi rate-independent anisotropic viscoplastic FCC-polycrystals	2158-2163
Berti, Francesca / Petrini, Lorenza / Spagnoli, Andrea	A discussion about multi-axial fatigue criteria for NiTinol cardiovascular devices	813-818
Guo, Xiaofei / Zaefferer, Stefan / Archie, Fady / Bleck, Wolfgang	Dislocation and twinning behaviors in high manganese steels in respect to hydrogen and aluminum alloying	1453-1459
Metaxa, Zoi S. / Kourkoulis, Stavros K.	Dispersion of graphene nanoplatelets reinforcing type II cement paste	2011-2016
Santos Pereira, Letícia dos / Moço, Rodrygo Figueiredo / Bolognesi Donato, Gustavo Henrique	Ductile fracture of advanced pipeline steels: study of stress states and energies in dynamic impact specimens - CVN and DWTT	1985-1992
Bragov, A. M. / Konstantinov, A. Yu. / Lomunov, A. K. / Petrov, Yu. V. / Basalin, A. V.	Dynamic Deformation and Fracture Toughness of Pipe Steel	1811-1816
Uenishi, Koji / Goji, Tsukasa	Dynamic fracture and wave propagation in a granular medium: A photoelastic study	769-774
Uenishi, Koji / Yoshida, Tomoya / Ionescu, Ioan R. / Suzuki, Kojiro	Dynamic fragmentation of ice spheres: Two specific fracture patterns	670-675
Chen, Tianyu / Harvey, Christopher M. / Wang, Simon / Silberschmidt, Vadim V.	Dynamic interfacial fracture of a thin-layered structure	613-618
Yamaguchi, Hikaru / Hosoe, Takahiro / Shibanuma, Kazuki / Aihara, Shuji	Dynamic measurement of CTOA of unstable ductile fracture of high pressure gas pipelines	1183-1188
Schmiedt, Anke / Lingnau, Lars / Manka, Matthias / Tillmann, Wolfgang / Walther, Frank	Effect of condensate corrosion on tensile and fatigue properties of brazed AISI 304L stainless steel joints using gold-base filler metal	22-27
Štefane, Primož / Naib, Sameera / Hertelé, Stijn / De Waele, Wim / Gubeljak, Nenad	Effect of crack length on fracture toughness of welded joints with pronounced strength heterogeneity	1895-1900
Schmandt, Christopher / Marzi, Stephan	Effect of crack opening velocity on fracture behavior of hyperelastic semi-structural adhesive joints subjected to mode I loading	799-805
Wang, Shuai / Xue, He / Cui, Yinghao / Tang, Wei / Gong, Xiaoyan	Effect of Different Cold Working Plastic Hardening on Mechanical Properties of 316L Austenitic Stainless Steel	1940-1946
Giang, N. A. / Kuna, M. / Hutter, G.	Effect of Gradient Plasticity on Crack Initiation and Propagation in the Ductile-Brittle Transition Region of Ferritic Steel	45-50
Bunin, Igor / Ryazantseva, Mariya / Anashkina, Nataliya	Effect of high-power nanosecond electromagnetic pulses on the structural, chemical, and technological properties of natural dielectric minerals	1971-1976
Teagho, Frank Tioguem / Maziere, Matthieu / Tankoua, Franck / Galtier, André / Gourgues-Lorenzon, Anne-Françoise	The Effect of Microstructure Constituents on the Static and Dynamic Fracture Behavior of High Strength Quenched and Tempered Martensitic Steels	763-768
Khodjet-Kesba, M. / Benkhedda, A. / Bedia, E. A. Adda / Boukert, B.	Effect of moisture absorption on the elastic properties in cracked composite laminates with transient hygrothermal conditions	181-186
Schmidt, Marco / Gerke, Steffen / Brünig, Michael	The Effect of Negative Stress Triaxialities on Ductile Damage and Fracture Behavior in Metal Sheets	91-96
Aissa, Talah / Rachid, Belaid / Kharchi, Fattoum	Effect of Pharmaceutical Wastes Usage as Partial Replacement of Cement on the Durability of High-Performance Concrete	218-221
Sheikh, Muhammad Zakir / Wang, Zhen / Suo, Tao / Li, Yulong / Ahmed, Sohail / Dar, Uzair Ahmed	Effect of Polymeric Interlayer on Wave Propagation in Transparent Soda-lime Glass	2120-2125
Amara, M. / Muthanna, B. G. N. / Abbes, M. Tahar / Meliani, M. Hadj	Effect of sand particles on the Erosion-corrosion for a different locations of carbon steel pipe elbow	2137-2142
Kishida, Kohei / Koyama, Motomichi / Yoshimura, Nobuyuki / Sakurada, Eisaku / Yokoi, Tatsuo / Ushioda, Kohsaku / Tsuzaki, Kaneaki / Noguchi, Hiroshi	Effect of Si on temperature dependence of non-propagation limit of small fatigue crack in a Fe-C alloy	1032-1036
Tanrıkulu, Barış / Toparli, M. Burak / Kılınçdemir, Emrah / Yurtdaş, Sezgin / İnce, Umut	Effect of socket depth on failure type of fasteners	1840-1844
Iordachescu, Mihaela / de Abreu, Maricely / Valiente, Andrés	Effect of transversal loading on the fatigue life of cold-drawn duplex stainless steel	584-589
Maier, Galina / Astafurova, Elena / Moskvina, Valentina / Melnikov, Evgeny / Astafurov, Sergey / Burlachenko, Alexander / Galchenko, Nina	Effect of vanadium-alloying on hydrogen embrittlement of austenitic high-nitrogen steels	1053-1058
Guo, Yanning / Ma, Yue / Wang, Fei	Effect of Welding Parameter on Dynamic Fracture Properties of 2024-T3 Aluminum Friction Stir Welded Joints	806-812
de Andrade, Leonardo Giangiulio Ferreira / Bolognesi Donato, Gustavo Henrique	Effects of crack tunneling and plasticity on the elastic unloading compliance technique for SE(B) – current limitations and proposals	1908-1914
Yu, Xin / Huang, Xiao / Zheng, Miao	Effects of Different Equations of State on the Oblique Shock Wave Reflection in Solids	1037-1042
Barbosa, Vitor Scarabeli / Ruggieri, Claudio	Effects of increased span on fracture toughness using non-standard PCVN specimens and implications for the reference temperature, T0	367-372
Moço, Rodrygo Figueiredo / Cavalcante, Fábio Gonçalves / Bolognesi Donato, Gustavo Henrique	Effects of manufacturing plastic prestrains found on calendered and UOE pipes and pressure vessels on structural integrity assessments regarding fatigue crack growth and LBB	1915-1923
Sun, Wenbo / Ma, Yu’e / Ai, Xiaopeng / Li, Jianghai	Effects of the building direction on fatigue crack growth behavior of Ti-6Al-4V manufactured by selective laser melting	1020-1025
Jovičić, Radomir / Sedmak, Simon / Cvetković, Radica Prokić / Popović, Olivera / Bubalo, Katarina Jovičić / Milosevic, Nenad	Effects of welding technology on the occurrence of fracture in welded joints	1682-1688
Shardakov, I. / Shestakov, A. / Glot, I.	Elastic and Dissipative Properties of Concrete under Impact Loads	1342-1346
Boychenko, N. V.	Elastic and plastic stress intensity factor in specimen of aluminum alloys under tension and bending in the temperature range	908-913
Nykyforchyn, Hryhoriy / Tsyrulnyk, Oleksandr / Zvirko, Olha	Electrochemical fracture analysis of in-service natural gas pipeline steels	1215-1220
Kiiko, V. M. / Khvostunkov, K. A. / Odzhaev, R. K.	Elements of non-destructive damage monitoring by electrostatic potential method	1433-1437
Kotrechko, Sergiy	Embrittlement of RPV metal under long-term irradiation: state-of-the-art and challenges	11-21
Takahashi, Yoshimasa / Kuriki, Ryosuke / Kashihara, Masaki / Shikama, Takahiro / Noguchi, Hiroshi	Emergence of distinct fatigue limit: impact of excess solute magnesium in 6061-T6 alloy	1010-1013
Que, Z. / Seifert, H. P. / Spätig, P. / Zhang, A. / Rao, G. S. / Ritter, S.	Environmental Degradation Effect of High-Temperature Water and Hydrogen on the Fracture Behavior of Low-Alloy Reactor Pressure Vessel Steels	926-931
Ng, Sze Ki / Kamaludin, Muhammad A. / Dear, John P. / Blackman, Bamber R.	Environmental effects in biaxially orientated Polymethyl Methacrylate	304-310
Lambert, R. D. / Aylott, C. J. / Shaw, B. A.	Evaluation of bending fatigue strength in automotive gear steel subjected to shot peening techniques.	1855-1860
Laureys, A. / Claeys, L. / Pinson, M. / Depover, T. / Verbeken, K.	Evaluation of blistered and cold deformed ULC steel with melt extraction and thermal desorption spectroscopy	1330-1335
Seitl, Stanislav / Miarka, Petr / Klusak, Jan / Kala, Zdenek / Krejsa, Martin / Blasón, Sergio / Canteli, Alfonso F.	Evaluation of fatigue properties of S355 J0 steel using ProFatigue and ProPagation software	1494-1501
Risitano, G. / Guglielmino, E. / Santonocito, D.	Evaluation of mechanical properties of polyethylene for pipes by energy approach during tensile and fatigue tests	1663-1669
Abdo, Dani / Gleadall, Andrew / Sprengel, Dirk / Silberschmidt, Vadim V.	Experimental and Morphological Investigations of Fracture Behavior of PBT/TPEE	511-516
Özaslan, Emre / Acar, Bülent / Güler, Mehmet A.	Experimental and numerical investigation of stress concentration and strength prediction of carbon/epoxy composites	535-541
Shen, Fuhui / Lian, Junhe / Münstermann, Sebastian / Kokotin, Valentin / Pretorius, Thomas	An Experimental and Numerical Investigation of the Anisotropic Plasticity and Fracture Properties of High Strength Steels from Laboratory to Component Scales	1312-1317
Prokhorov, A. / Kostina., A. / Vedernikova, A. / Plekhov, O. / Menaka, M. / Venkatraman, B.	Experimental and numerical investigation of the fracture in steel welded joints	1521-1526
Aleksic, Bojana / Milovic, Ljubica / Grbović, Aleksandar / Hemer, Abubkr / Aleksic, Vujadin / Zrilic, Milorad	Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines	1589-1594
Vshivkov, A. / Iziumova, A. / Zakharov, A. / Shlyannikov, V. / Plekhov, O.	The experimental and theoretical study of plastic deformation in the fatigue crack tip based on method of digital image correlation	1189-1194
Kitamura, Takayuki / Sumigawa, Takashi	Experimental Approach to Fracture Mechanics in Nanometer Scale	2180-2183
Al-Shuwaili, Mohammed A. / Palmeri, Alessandro / Lombardo, Mariateresa	Experimental characterisation of Perfobond shear connectors through a new one-sided push-out test	2024-2029
Milčić, Miodrag / Burzić, Zijah / Radisavljević, Igor / Vuherer, Tomaž / Milčić, Dragan / Grabulov, Vencislav	Experimental investigation of fatigue properties of FSW in AA2024-T351	1977-1984
Bernard, Odounga / Rostand, Moutou Pitti / Evelyne, Toussaint / Michel, Grédiac	Experimental investigation of mixed mode fracture of tropical wood material	347-352
Pasiou, Ermioni D. / Kourkoulis, Stavros K. / Tsousi, Maria G. / Markides, Christos F.	Experimental investigation of the displacement field in a circular disc drilled eccentrically	2101-2108
Odrobiňák, Jaroslav / Gocál, Jozef	Experimental measurement of structural steel corrosion	1947-1954
Teraud, W.	An experimental method for high temperature non-contacting measurements of deformed specimen	238-242
Tretyakov, M. P. / Tretyakova, T. V. / Wildemann, V. E.	Experimental study of mechanical properties of steel 40Cr in the necking area of specimen during the postcritical deformation	1720-1724
Demet, Seyit Mehmet / Ersoyoğlu, Ali Serhat	Experimental Study on Fatigue Fracture Damage of Symmetric Spur Gear Tooth	2036-2039
La Rosa, Guido / Clienti, Carmelo / Mineo, Rosalia	Experimental tests on new titanium alloy interbody cervical cages	373-378
Newishy, M. / Khodir, S. A. / Abdel-Aleem, H.	Failure analysis of gas sweetening tower absorber packing	353-360
Hansson, Per	Fatigue behavior of single-crystal nano-sized Cu beams	837-842
Solberg, K. / Torgersen, J. / Berto, F.	Fatigue Behaviour of Additively Manufactured Inconel 718 Produced by Selective Laser Melting.	1762-1767
Ezeh, O. H. / Susmel, L.	Fatigue behaviour of additively manufactured polylactide (PLA)	728-734
Eguchi, Takeshi / Koyama, Motomichi / Fukushima, Yoshihiro / Tasan, Cemal Cem / Tsuzaki, Kaneaki	Fatigue Crack Growth Behavior and Associated Microstructure in a Metastable High-Entropy Alloy	831-836
Nečemer, B. / Kramberger, J. / Glodež, S.	Fatigue crack initiation and propagation in auxetic porous structures	2261-2266
Smaili, Fidan / Vuherer, Tomaž	Fatigue crack propagation initiated at artificially made small defect in two different HAZ microstructures	1347-1352
Demet, Seyit Mehmet / Ersoyoğlu, Ali Serhat	Fatigue Fracture Behaviour of Asymmetric Spur Gear Tooth Under Cyclic Loading	2030-2035
Boljanovic, Slobodanka / Maksimovic, Stevan / Carpinteri, Andrea	Fatigue life analysis of edge-notches with damage	1093-1098
Soares, H. / Anes, V. / Freitas, M. / Reis, L.	Fatigue life of a railway wheel under uniaxial and multiaxial loadings	1786-1791
Závodská, Denisa / Kuchariková, Lenka / Tillová, Eva / Guagliano, Mario / Chalupová, Mária / Uhríčik, Milan / Belan, Juraj	The Fatigue lifetime of AlZn10Si8Mg cast alloy with different percentage of iron	1554-1559
Razavi, S. M. J. / Berto, F.	Fatigue strength of notched specimens made of Ti-6Al-4V produced by Selected Laser Melting technique	74-78
Berchtold, Markus / Klopfer, Ingbert	Fatigue Testing at 1000Hz Testing Frequency	676-679
Merson, E. D. / Myagkikh, P. N. / Poluyanov, V. A. / Merson, D. L. / Vinogradov, A.	Features of the Hydrogen-Assisted Cracking Mechanism in the Low-Carbon Steel at Ex- and In-situ Hydrogen Charging	1141-1147
Angela, Danilo D’ / Ercolino, Marianna	Finite Element Analysis of Fatigue Response of Nickel Steel Compact Tension Samples using ABAQUS	939-946
Williams, Richard J. / Hooper, Paul A. / Davies, Catrin M.	Finite element prediction and validation of residual stress profiles in 316L samples manufactured by laser powder bed fusion	1353-1358
Coules, H. E.	Flaw interaction under bending, residual stress and thermal shock loading	361-366
Davies, Catrin M. / Withnell, Olivia / Ronnerberg, Tobias / Williams, Richard / Hooper, Paul A.	Fracture Analysis of 316L Steel Samples Manufactured by Selective Laser Melting	1384-1389
Musrati, Walid / Medjo, Bojan / Gubeljak, Nenad / Štefane, Primož / Veljić, Darko / Sedmak, Aleksandar / Rakin, Marko	Fracture analysis of axially flawed ring-shaped bending specimen	1828-1833
Wärner, Hugo / Calmunger, Mattias / Chai, Guocai / Polák, Jaroslav / Petráš, Roman / Heczko, Milan / Kruml, Tomáš / Johansson, Sten / Moverare, Johan	Fracture and Damage Behavior in an Advanced Heat Resistant Austenitic Stainless Steel During LCF, TMF and CF	843-848
Aliha, M. R. M. / Bagherifard, S. / Akhondi, Sh. / Mousavi, SS. / Mousavi, A. / Parsania, H.	Fracture and microstructural study of bovine bone under mixed mode I/II loading	1488-1493
Gao, Guiyun	Fracture behavior of rock plate under static and dynamic combined loads	51-56
Mousa, Saeed / Abd-Elhady, Amr A. / Kim, Gap-Yong / Sallam, Hossam El-Din M.	Fracture behavior of roll bonded Al-brass-Al multilayer composites – Concept of the maximum undamaged defect size (d)	686-693
Kuchariková, Lenka / Mazur, Magdalena / Tillová, Eva / Chalupová, Mária / Závodská, Denisa / Vaško, Alan	Fracture behavior of the secondary A226 cast alloy with 0.9% Fe	1577-1582
Bard, Simon / Demleitner, Martin / Häublein, Markus / Altstädt, Volker	Fracture behaviour of prepreg laminates studied by in-situ SEM mechanical tests	1442-1446
Lukyanchuk, A. A. / Kalinin, A. G. / Pankov, A. V. / Svirskiy, Yu. A.	Fracture criterion for tested CFRP specimens under tension	1285-1290
Cabrilo, Aleksandar / Geric, Katarina	Fracture mechanic and charpy impact properties of a crack in weld metal, HAZ and base metal of welded armor steel	2059-2064
Brüggemann, J.-P. / Risse, L. / Kullmer, G. / Schramm, B. / Richard, H. A.	Fracture mechanical investigations on selective laser melted Ti-6Al-4V	317-321
Iskander, Mina / Shrive, Nigel	Fracture of brittle materials under uniaxial compression	976-981
Schindler, Hans-Jakob	Fracture toughness for engineering application: There is a need for more suitable testing standards	398-403
Shlyannikov, V. N. / Zakharov, A. P. / Tumanov, A. V. / Tartygasheva, A. M.	Generalization of mixed mode crack behavior on the base of nonlinear fracture resistance parameters	1117-1122
Davoudinejad, A. / Perez, L. C. Diaz / Quagliotti, D. / Pedersen, D. B. / Albajez García, J. A. / Yagüe-Fabra, J. A. / Tosello, G.	Geometrical and feature of size design effect on direct stereolithography micro additively manufactured components	1250-1255
Zugic, Zeljko / Sedmak, Simon / Folić, Boris	Geotechnical aspects on seismic retrofit	410-414
Palin-Luc, Thierry / Jeddi, Dalenda	The gigacycle fatigue strength of steels: a review of structural and operating factors	1545-1553
Di Cocco, V. / Iacoviello, F. / Carlino, F. / Natali, S.	Grain size influence on fatigue behaviour in a CuZnAl PE SMA	204-209
Reich, Stefan / Sagar Vanapalli, M. Raghu	Hard body impact on glass panes and the fracture energy equilibrium	28-33
Plekhov, O. / Vshivkov, A. / Iziumova, A. / Zakharov, A. / Shlyannikov, V.	The heat dissipation at fatigue crack tip under mix mode loading	1209-1214
Zakir, Sheikh Muhammad / Zhen, Wang / Tao, Suo / Yulong, Li / Fenghua, Zhou / Sohail, Ahmed / Dar, Uzair Ahmed	High Rate Response and Dynamic Failure of Aluminosilicate Glass under Compression Loading	1244-1249
Yanagimoto, Fuminori / Shibanuma, Kazuki / Suzuki, Katsuyuki	High speed observation of fast crack propagation and arrest behaviour in 3D transparent structures	2095-2100
Sohail, Ahmed / Xitao, Zheng / Zakir, Shiekh Muhammad	High velocity impact response of 3D hybrid woven composites	450-455
Cherubini, Antonello / Bacchi, Linda / Corsinovi, Serena / Beghini, Marco / Valentini, Renzo	Hydrogen Embrittlement in Advanced High Strength Steels and Ultra High Strength Steels: a new investigation approach	753-762
Gabetta, G. / Pagliari, F. / Rezgui, N.	Hydrogen Embrittlement in pipelines transporting sour hydrocarbons	746-752
Hafsi, Zahreddine / Mishra, Manoranjan / Elaoud, Sami	Hydrogen embrittlement of steel pipelines during transients	210-217
Alvaro, Antonio / Wan, Di / Olden, Vigdis / Barnoush, Afrooz	Hydrogen Enhanced Fatigue Crack Growth Rates in a Ferritic Fe-3wt%Si Alloy	1514-1520
Depover, T. / Eeckhout, E. Van den / Verbeken, K.	The hydrogen trapping ability of TiC and V4C3 by thermal desorption spectroscopy and permeation experiments	1414-1420
Boukellif, Ramdane / Ricoeur, Andreas	Identification of crack positions and crack loading quantities from strain gauge data by inverse problem solution	85-90
Kopietz, Mark / Wetzel, Bernd	Impact of Aggressive Media on the Interlaminar Shear Strength of Innovative Glass Fiber Reinforced Polyurea/Polysilicate Hybrid Resins	143-148
Schieppati, Jacopo / Schrittesser, Bernd / Wondracek, Alfred / Robin, Stefan / Holzner, Armin / Pinter, Gerald	Impact of temperature on the fatigue and crack growth behavior of rubbers	642-647
Waqas, Ali / Xiansheng, Qin / Jiangtao, Xiong / Chaoran, Yang / Fan, Liu	Impact toughness of components made by GMAW based additive manufacturing	2065-2070
Wray, L. A. / Ayre, D. / Irving, P. E. / Jackson, P. A. / Jones, P. R. / Zhao, F.	Implications of Substrate Geometry and Coating Thickness on the Cracking Resistance of Polymer-Based Protective Coatings	1768-1773
Lapin, V. N. / Cherny, S. G.	An implicit criterion of fracture growth direction for 3D simulation of hydraulic fracture propagation	1171-1176
Dong, Yinghao / He, Xiaofan / Li, Yuhai	An improved KI expression for a semi-elliptical surface crack in a finite plate subjected to uniform tension	1714-1719
Kumar, Avanish / Singh, Aparna	Improvement of Strength-Toughness Combination in Nanostructured Bainite	548-553
Wu, Yanzeng / Bao, Rui / Zhang, Shaoqin	In-situ measurement of near-tip fatigue crack displacement variation in laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy	890-895
Procopio, Isabela / Cicero, Sergio / Mottershead, Kevin / Bruchhausen, Matthias / Cuvilliez, Sam	INCEFA-PLUS (Increasing safety in NPPs by covering gaps in environmental fatigue assessment)	97-103
Grubiša, Luka / Bajić, Darko / Vuherer, Tomaž	Influence of Activating Flux on the Mechanical Properties of the Plasma Welded Joint of Austenitic Steel	430-437
Tretyakova, Tatyana / Zubova, Ekaterina	Influence of additional vibration impact on kinetics of strain bands due to the Chernov-Lüders deformation and Portevin-Le Chatelier effect in metals	1739-1744
Topolář, Libor / Keprdová, Šárka / Pazdera, Luboš	The influence of aggregate grain size on the parameters of acoustic emission signals obtained from a three-point bending test on concrete specimens degraded by high-temperatures	1177-1182
Funk, Meike / Bär, Jürgen	Influence of crack initiation on short crack propagation and cyclic lifetime of AA 7475-T761	279-284
Dibblee, Katharina / Richard, Hans Albert / Kullmer, Gunter	Influence of Fracture Mechanically Graded Materials on the Crack Propagation Behaviour in 3-dimensional Structures	322-327
Suemasu, Taro / Koyama, Motomichi / Hamada, Shigeru / Ueda, Masaharu / Noguchi, Hiroshi	The influence of fracture surface contact in fatigue crack propagation of material having texture under Mode II loading	1088-1092
Šubic, Barbara / Ugovšek, Aleš / Starman, Nejc / Tatic, Uros / Kovačič, Aljaž / Fajdiga, Gorazd	Influence of glued-in reinforcement profiles on the thermal characteristics of wooden window profiles	503-510
Suzuki, Yuta / Hemmi, Takuhiro / Yanagimoto, Fuminori / Shibanuma, Kazuki	The influence of grain size on cleavage crack propagation resistance in ferritic steels	1221-1225
Popović, O. / Cvetković, R. Prokić / Radović, Lj. / Burzić, Z. / Arsić, D.	The influence of heat input on the toughness and fracture mechanism of surface weld metal	2216-2220
Pokhmurskii, V. / Khoma, M. / Vynar, V. / Ch, Vasyliv / Ratska, N. / Voronyak, T. / Stasyshyn, I.	The influence of hydrogen desorption on micromechanical properties and tribological behavior of iron and carbon steels	2190-2195
Sasaki, Daisuke / Tampa, Yuki / Kato, Toru	Influence of Hydrogen for Crack Formation during Mechanical Clinching	1006-1009
Květoň, Josef / Eliáš, Jan	Influence of inertia and material properties on discrete simulation of dynamic fracture of concrete	1367-1372
Alabi, A. A. / Moore, P. L. / Wrobel, L. C. / Campbell, J. C. / He, W.	Influence of Loading Rate on the Fracture Toughness of High Strength Structural Steel	877-885
Cosentino, Isabella / Restuccia, Luciana / Ferro, Giuseppe Andrea / Tulliani, Jean-Marc	Influence of pyrolysis parameters on the efficiency of the biochar as nanoparticles into cement-based composites	2132-2136
Hortigón, B. / Ancio, F. / Nieto-García, E. J. / Herrera, M. A. / Gallardo, J. M.	Influence of rebar design on mechanical behaviour of Tempcore steel	601-606
Guo, Rui / Xue, He / Gong, Xiaoyan	Influence of residual stress and heterogeneity on mechanical field at crack tips in safety end of nuclear power plant	2202-2209
Zhang, Kejin / Hamada, Shigeru / Koyama, Motomichi / Yokoi, Tatsuo / Noguchi, Hiroshi	Influence of shear-affected-zone due to punching on tensile characteristics of steel plate	1047-1052
da Silva, Felipe C. / Tunes, Matheus A. / Sagás, Julio C. / Schön, Cláudio G.	Influence of substrate stiffness and of PVD parameters on the microstructure and tension fracture characteristics of TiN thin films	658-663
Camagic, Ivica / Sedmak, Simon / Burzić, Zijah / Sedmak, Aleksandar	Influence of temperature and exploitation time on hardness and micro-structure of a welded joint in a reactor mantle	2249-2254
Malikova, Lucie / Klusak, Jan	Influence of the Interfacial Transition Zone on crack behavior in a matrix/aggregate system	1798-1803
Van Puymbroeck, Evy / Nagy, Wim / De Backer, Hans	Influence of the welding process on the residual welding stresses in an orthotropic steel bridge deck	920-925
Smirnov, Ivan / Konstantinov, Alexander	Influence of ultrafine-grained structure produced by equal-channel angular pressing on the dynamic response of pure copper	1336-1341
Milovanović, Aleksandar / Sedmak, Aleksandar	Integrity assessment of ammonia spherical storage tank	994-999
Shatskyi, Ivan / Dalyak, Taras	Interaction of contact cracks and narrow slits in plate bending	1476-1481
Gleadall, Andrew / Poon, Wingho / Allum, James / Ekinci, Alper / Han, Xiaoxiao / Silberschmidt, Vadim V.	Interfacial fracture of 3D-printed bioresorbable polymers	625-630
Tsutsui, Naoyuki / Koizumi, Hirokazu	Intergranular/transgranular fracture in the liquid metal embrittlement of polycrystalline zinc	849-854
Larisa, Stepanova	Intermediate self-similar asymptotic presentation of stress and damage fields in the vicinity of mixed mode crack tip under creep regime	255-260
Tlatlik, Johannes / Siegele, Dieter	Investigation and Modeling of Local Crack Arrest in Ferritic-Bainitic Steels Under Dynamic Loading	243-248
Sucharda, Oldrich / Lehner, Petr / Konečný, Petr / Ponikiewski, Tomasz	Investigation of Fracture Properties by Inverse Analysis on Selected SCC Concrete Beams with Different Amount of Fibres	1533-1538
De Bruycker, Evy / Huysmans, Staf / Vanderlinden, Frédéric	Investigation of the hydrogen embrittlement susceptibility of T24 boiler tubing in the context of stress corrosion cracking of its welds	226-231
Yanagimoto, Fuminori / Shibanuma, Kazuki / Okawa, Teppei / Suzuki, Katsuyuki / Aihara, Shuji	Investigation on brittle crack propagation and arrest behaviour under high crack driving force in steel	116-122
Georgievskaia, Evgeniia	Justification of the hydraulic turbines lifetime from the standpoint of the fracture mechanics	971-975
Hrstka, M. / Žák, S. / Vojtek, T.	Large plastic zones and extensive influence of notch under near-threshold mode II and mode III loading of fatigue cracks	1123-1128
Lach, Ralf / Monami, Andrea / Grießbach, Sören / Grießbach, Volker / Grellmann, Wolfgang	Lifetime assessment of additive manufactured polymer materials by means of the rolling ring test using cyclically loaded notched ring specimens	34-38
Lei, Yuebao	A local limit load model for J prediction via the reference stress method	571-577
Ichii, Kenshiro / Koyama, Motomichi / Tasan, Cemal Cem / Tsuzaki, Kaneaki	Localized Plasticity and Associated Cracking in Stable and Metastable High-Entropy Alloys Pre-Charged with Hydrogen	716-721
Song, Wei / Liu, Xuesong / Bertob, Filippo	Low and high cycle fatigue assessment of mismatched load-carrying cruciform joints	2227-2232
La Rosa, Guido / Clienti, Carmelo / Cugno Garrano, Adriana Marino / Savio, Fabio Lo	Low-cycle fatigue hysteresis by thermographic and digital image correlation methodologies: a first approach	1583-1588
Cui, Yinghao / Xue, He / Wang, Shuai / Gong, Xiaoyan / Zhang, Jianlong	Main mechanical factors affecting creep strain at crack tip of stress corrosion cracking in full life cycle	1291-1296
Vujović, Vera	The Mala Rijeka Bridge - Specificity of maintenance	1901-1907
Marsavina, Liviu / Pop, Octavian / Pepelan, Raluca	Mark tracking technique for experimental determination of fracture parameters	1867-1872
Brighenti, Roberto / Artoni, Federico	Mechanical modelling of self-diagnostic polymers	819-824
Wang, Jiaming / Jivkov, Andrey P. / Engelberg, Dirk L. / Li, Q. M.	Meso-scale modelling of mechanical behaviour and damage evolution in normal strength concrete	560-565
Könemann, Markus / Brinnel, Victoria / Henrich, Manuel / Münstermann, Sebastian	A method for component-oriented toughness analysis of modern multiphase steels	914-919
Čechmánek, René / Prachař, Vladan / Drdlová, Martina / Boháč, Martin	Methods for characterization of fresh and hardened state of fibre concrete	1780-1785
Lessmann, Moritz / Sawyer, John / Knowles, David	Methods for Complex Cracked Body Finite Element Assessments	1232-1237
Đurđević, Andrijana / Sedmak, Aleksandar / Živković, Aleksandar / Đurđević, Đorđe / Markovic, Milan / Milčić, Miodrag	Microhardness and Macrostructures of Friction Stir Welded T-joints	424-429
Yalçinkaya, Tuncay / Özdemir, İzzet / Firat, Ali Osman / Tandoğan, İzzet Tarik	Micromechanical Modeling of Inter-Granular Localization, Damage and Fracture	385-390
Cvetković, R. Prokić / Popović, O. / Jovicic, R. / Milosevic, N. / Burzić, Z. / Cvetković, I.	Microstructural and fracture analysis of microalloyed steel weld metal	2221-2226
Fedorova, Elena / Burov, Andrey / Sukhodoeva, Nadezhda / Moskvichev, Vladimir	Microstructural and numerical analysis of fracture mechanisms in a thermal barrier coating system on Ni-based superalloys	741-745
Lepov, Valeriy / Grigoriev, Albert / Bisong, Mbelle / Achikasova, Valentina / Lepova, Kyunna / Ivanova, Anastasia / Balakleiskii, Nikolay / Loginov, Boris / Loginov, Artem	Microstructure Analyses and Multiscale Stochastic Modeling of Steel Structures Operated in Extreme Environment	1201-1208
Gu, Chao / Lian, Junhe / Bao, Yanping / Münstermann, Sebastian	A microstructure sensitive modeling approach for fatigue life prediction considering the residual stress effect from heat treatment	2048-2052
Vaško, Alan / Uhríčik, Milan / Kuchariková, Lenka / Tillová, Eva	Microstructure, mechanical and fatigue properties of SiMo- and SiCu- nodular cast irons	1527-1532
Loh, Lukas / Marzi, Stephan	A Mixed-Mode Controlled DCB test on adhesive joints loaded in a combination of modes I and III	1318-1323
Petrović, Ana / Maneski, Tasko / Ignjatović, Dragan / Trisovic, Natasa / Grozdanović, Ines / Li, Wei	Model analysis of complex structures – advantages of physical sub-scaled model testing and shortcomings in physical model production	456-460
Šupić, Admir / Bečirović, Almir / Obućina, Aldin / Zrilic, Milorad	Modeling and Simulation for Aluminium Profile Extrusion	2077-2082
Wu, Baijian / Tang, Keke	Modelling of dynamic crack propagation on concrete matrix-aggregate interface	722-727
Okeke, C. P. / Thite, A. N. / Durodola, J. F. / Fellows, N. A. / Greenrod, M. T.	Modelling of hyperelastic polymers for automotive lamps under random vibration loading with proportional damping for robust fatigue analysis	1460-1469
Golovnev, Igor / Golovneva, Elena / Utkin, Andrey	Molecular-dynamic investigation of the initial failure of the crystal structure at the external cyclic uniaxial extension	1632-1637
Klusak, Jan / Krepl, Ondrej	Multi-parameter average strain energy density factor criterion applied on the bi-material notch problem	1261-1266
Krepl, Ondrej / Klusak, Jan	Multi-parameter average strain energy density factor criterion applied on the sharp material inclusion problem	1279-1284
Gonçalves, Roberta Amorim / Pereira, Marcos V. / Darwish, Fathi A.	Multiaxial high cycle fatigue criteria applied to motor crankshafts	1256-1260
Smolin, Alexey / Shilko, Evgeny / Shalomeeva, Anna	Multiscale model of mechanical behavior of ceramics composite with soft matter filling based on movable cellular automaton	680-685
Jacob, Anais / Mehmanparast, Ali / Kelleher, Joe / Burca, Genoveva	Neutron diffraction and neutron imaging residual strain measurements on offshore wind monopole weldments	517-522
Koyama, Motomichi / Eguchi, Takeshi / Ichii, Kenshiro / Tasan, Cemal Cem / Tsuzaki, Kaneaki	A new design concept for prevention of hydrogen-induced mechanical degradation: viewpoints of metastability and high entropy	292-297
Qian, Guian / Lei, Wei-Sheng / Zhu, Shunpeng / Correia, José / de Jesús, Abílio	A new local approach to cleavage fracture and its application in a reactor pressure vessel	2174-2179
Jurek, Michal / Radzieński, Maciej / Kudela, Pawel / Ostachowicz, Wieslaw	Non-contact excitation and focusing of guided waves in CFRP composite plate by air-coupled transducers for application in damage detection	2089-2094
Lomakin, Evgeny / Fedulov, Boris	Nonlinear deformation and failure analysis of laminated composites	664-669
Yarullin, R. R. / Zakharov, A. P. / Ishtyriakov, I. S.	Nonlinear fracture resistance parameters for cracked aircraft GTE compressor disk	902-907
Turkova, Vera	Nonlinear solid mechanics: applications to loading of structures in damaged materials	982-987
Lukhi, Mehul / Hütter, Geralf / Kuna, Meinhard	A Novel Micromechanics Approach for Understanding of Fatigue in Nodular Cast Iron	607-612
Okeke, C. P. / Thite, A. N. / Durodola, J. F. / Greenrod, M. T.	A novel test rig for measuring bending fatigue using resonant behaviour	1470-1475
Youn, Gyo Geun / Nam, Hyun Suk / Kim, Yun Jae	Numerical analysis for the thermal ageing effect on fracture behaviors of CF8A pipes and piping systems under monotonic and very low cycle fatigue loading conditions	1305-1311
Anandavijayan, Satya / Mehmanparast, Ali / Brennan, Feargal	A numerical analysis of the effects of manufacturing processes on material pre-strain in offshore wind monopiles	953-958
Bosiakov, Sergei / Yurkevich, Kirill / Silberschmidt, Vadim V. / Ershova, Anna	Numerical and analytical model of long tubular bones with anisotropic distribution of elastic properties	636-641
El Kabir, S. / Dubois, F. / Moutou Pitti, R. / Recho, N. / Lapusta, Y.	Numerical and analytical modeling of crack path for three-dimensional mixed mode crack problem using global approach	1390-1395
Kopp, Jean-Benoît / Fond, Christophe / Hochstetter, Gilles	A numerical and experimental investigation of dynamic fracture in Polyamide 11: the effect of the sample geometry	855-861
Hamdi, Seif Eddine / Piti, Rostand Mouttou	Numerical investigation of climate change impacts on European wood species vulnerability	523-528
Sohail, Ahmed / Xitao, Zheng / Zakir, Shiekh Muhammad / Di, Zhang	Numerical modeling of 3D woven hybrid composites for stiffness and strength prediction	1014-1019
Shibanuma, Kazuki / Suzuki, Yuta / Kiriyama, Kazuya / Hemmi, Takuhiro / Shirahata, Hiroyuki	A numerical simulation model of microscopic cleavage crack propagation based on 3D XFEM	1238-1243
Doncheva, Elisaveta / Medjo, Bojan / Rakin, Marko / Sedmak, Simon / Trajanoska, Bojana	Numerical simulation of crack propagation in high-strength low-alloyed welded steel	483-488
Moonens, Marc / Wyart, Eric / Hinderdael, Michaël / de baere, Dieter / Guillaume, Patrick	Numerical Simulation of Fatigue Crack Growth in Straight Lugs Equipped with Efficient Structural Health Monitoring	1708-1713
Miao, Zheng / Xin, Yu / JianWei, Yin	Numerical Simulation of Spall Behavior of Metal Under Strong Impact Loading	1043-1046
Youn, Gyo Geun / Nam, Hyun Suk / Kim, Yun Jae / Kim, Jin Won	Numerical Simulation of Thermal Ageing Effect on Fracture Behavior for CF8A Cast Stainless Steels under Very Low Cyclic Loading Conditions	1297-1304
Hesse, Ann-Christin / Nitschke-Pagel, Thomas / Dilger, Klaus	On the effect of weld defects on the fatigue strength of beam welded butt joints	2053-2058
Brüggemann, J.-P. / Risse, L. / Kullmer, G. / Richard, H. A.	Optimization of the fracture mechanical properties of additively manufactured EN AW-7075	311-316
Jelić, Mirjana	Patented inventions of Serbian scientists in the field of seismic reliability of structures and landslide remediation with application	391-397
Ricotta, Mauro / Zappalorto, Michele / Marchiori, Mattia / Campagnolo, Alberto / Meneghetti, Giovanni	The Peak Stress Method Applied to Bi-Material Corners	1560-1565
Di Cocco, V. / Iacoviello, F.	Pearlitic ductile cast iron: fatigue crack paths and damaging micromechanisms	192-197
Hredil, Myroslava	Peculiarities of bond strength degradation in reinforced concrete induced by accelerated electrochemical methods	1657-1662
Yolum, U. / Gök, E. / Coker, D. / Güler, M. A.	Peridynamic Modelling of Delamination in DCB Specimen	2126-2131
Zugic, Zeljko / Aranđelović, Mihajlo / Folić, Boris	Permanent ground displacement across earthquake faults, landslides and natural slopes	415-419
Liu, Zhengkun / Juhre, Daniel	Phase-Field Modelling of Crack Propagation in Anisotropic Polycrystalline Materials	787-792
Liu, Zhengkun / Roggel, Julian / Juhre, Daniel	Phase-Field Modelling of Fracture in Viscoelastic Solids	781-786
Vedernikova, A. / Kostina, A. / Petrova, A. / Plekhov, O.	Physical explanation of the critical distance theory and a link with structure of material	1165-1170
Iordachescu, Mihaela / Valiente, Andrés / Scutelnicu, Elena	Plastic hinge performance of repaired welded joints in steel structures	554-559
Lian, Junhe / Liu, Wenqi / Papadioti, Ioanna / Bellas, Ilias / Chandran, Sarath / Verleysen, Patricia / Richter, Helmut / Aravas, Nikolaos / Münstermann, Sebastian	Plasticity and failure behavior modeling of high-strength steels under various strain rates and temperatures: microstructure to components	1421-1426
Bär, Jürgen	Plasticity induced heating – an underestimated effect in monotonic and cyclic deformation?	947-952
Ito, Hiroaki / Shibanuma, Kazuki / Ueda, Koya / Kinefuchi, Masao / Suzuki, Katsuyuki / Enoki, Manabu	Prediction model for fatigue life and limit of steel based on small crack micromechanics	1105-1110
Křivý, Vít / Kubzova, Monika / Kreislová, Kateřina / Krejsa, Martin	Prediction model of corrosion losses based on probabilistic approach	825-830
Khosravani, Mohammad Reza / Nasiri, Sara / Weinberg, Kerstin	Prediction of fracture in sandwich-structured composite joints using case-based reasoning approach	168-173
Kunigita, Michihiro / Tanaka, Kengo / Kawabata, Tomoya / Kasuya, Tadashi / Okazaki, Yoshiomi / Inomoto, Masahiro / Aihara, Shuji	Prediction of steel weld HAZ Charpy impact property based on stochastic fracture model incorporating microstructural parameters	198-203
Trampus, Péter	Pressurized Thermal Shock analysis of the reactor pressure vessel	2083-2088
Sano, Temma / Sasaki, Daisuke / Koyama, Motomichi / Hamada, Shigeru / Noguchi, Hiroshi	Proposal and verification of novel fatigue crack propagation simulation method by finite element method.	1154-1158
Kaida, Taketo / Koyama, Motomichi / Hamada, Shigeru / Noguchi, Hiroshi / Sakurada, Eisaku / Yokoi, Tatsuo / Ushioda, Kohsaku	Proposal of fractographic analysis method coupled with EBSD and ECCI	1076-1081
Mizoguchi, Tomoki / Koyama, Motomichi / Noguchi, Hiroshi	Quantification method for parameters affecting multi-scale roughness-induced fatigue crack closure	1071-1075
Smith, Adam / Knop, Mark	Quantifying the Deleterious Effect of Sea Water on the Fatigue Life of Welded Steel Joints Using a Fracture-Mechanics Approach	566-570
Hamada, Shigeru / Suemasu, Taro / Koyama, Motomichi / Ueda, Masaharu / Noguchi, Hiroshi	Re-examination of fatigue crack propagation mechanism under cyclic Mode II loading	1026-1031
Eliezer, Dan / Silverstein, Ravit	Recent Studies of Hydrogen Embrittlement in Structural Materials	2233-2238
Pallaspuro, Sakari / Mehtonen, Saara / Kömi, Jukka / Zhang, Zhiliang / Porter, David	Reference toughness – a pragmatic tool to estimate ductile-brittle transition temperatures	1135-1140
Tiwari, Kumar Anubhav / Raišutis, Renaldas	Refinement of defect detection in the contact and non-contact ultrasonic non-destructive testing of wind turbine blade using guided waves	1566-1570
Atroshenko, S. A. / Evstifeev, A. D. / Petrov, Yu. V.	Relation between structure of metallic materials and fracture properties under conditions of solid particle erosion	1359-1361
Brynk, Tomasz / Romelczyk-Baishya, Barbara	Residual stress estimation based on 3D DIC displacement filed measurement around drilled holes	1267-1272
Babić, Milena / Verić, Ozren / Božić, Željko / Sušić, Aleksandar	Reverse engineering based integrity assessment of a total hip prosthesis	438-443
Barros, Francisco / Sousa, Pedro J. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Robust reference system for Digital Image Correlation camera recalibration in fieldwork	1993-1998
Hosseini, Reza Khadem	Root Cause Failure Analysis of Superheated Steam Tube at a Petrochemical Plant	232-237
Atroshenko, S. A. / Morozov, V. A. / Kats, V. M. / Gribanov, D. A. / Petrov, Yu. V.	Rupture of copper rings by a magnetic-pulse method over a wide range of loading times	1373-1377
Strzelecki, Przemysław	Scatter of fatigue life regarding stress concentration factor	631-635
Shardakov, I. N. / Shestakov, A. P. / Sobyanin, К. V. / Glot, I. O.	Shock interaction of elements of the system "Striker - Gasket - Reinforced concrete beam"	1362-1366
Furuta, Yasuyuki / Nishizono, Yuki / Aihara, Shuji / Yanagimoto, Fuminori / Kawabata, Tomoya / Shibanuma, Kazuki / Oliveira, Carlos A. / Shinohara, Armando H.	Simulated running ductile fracture experiment using rubber tube	110-115
Lenz, David / Könemann, Markus / Brinnel, Victoria / Langenberg, Julius / Münstermann, Sebastian	Simulating toughness properties under varying temperatures with micromechanical and phenomenological damage models	2239-2244
Belyaev, Fedor S. / Evard, Margarita E. / Volkov, Aleksandr E.	Simulation of Fatigue Fracture of FeMn-based Shape Memory Alloys at Cyclic Mechanical Tests	988-993
Suzuki, Kai / Koyama, Motomichi / Noguchi, Hiroshi	Small fatigue crack growth in a high entropy alloy	1065-1070
Reheman, Wureguli / Ståhle, Per / Singh, Ram N. / Fisk, Martin	Stable and unstable growth of crack tip precipitates	1792-1797
Tretyakova, Tatyana / Tretyakov, Mikhail / Wildemann, Valery	Stable crack growth in Al-Cu-Mg alloy under various stiffness of loading system in bodies with concentrators	1774-1779
Mitrović, R. / Miskovic, Z. / Ristivojević, M. / Dimić, A. / Danko, J. / Bucha, J. / Milesich, T.	Statistical correlation between the printing angle and stress and strain of 3D printed models	475-482
Smolin, I.Yu. / Makarov, P. V. / Kulkov, A. S. / Eremin, M. O. / Tunda, V. A. / Mikushina, V. A.	Statistical peculiarities of the mechanical response of loaded solids at the pre-fracture stage	1059-1064
Katinić, Marko / Kozak, Dražan	Steam turbine moving blade failure caused by corrosion fatigue – case history	2040-2047
Lehner, Petr / Křivý, Vít / Krejsa, Martin / Pařenica, Přemysl / Kozák, Jaroslav	Stochastic Service Life Prediction of Existing Steel Structure Loaded by Overhead Cranes	1539-1544
Mitrovic, Nenad / Petrovic, Aleksandar / Milošević, Miloš	Strain measurement of pressure equipment components using 3D Digital Image Correlation method	1605-1608
Kumamoto, Tsubasa / Koyama, Motomichi / Tsuzaki, Kaneaki	Strain Rate Sensitivity of Microstructural Damage Evolution in a Dual-Phase Steel Pre-Charged with Hydrogen	710-715
Kurek, Andrzej / Kurek, Marta / Łagoda, Tadeusz	Strain-life fatigue curves on the basis of shear strains from torsion	2210-2215
Shatskyi, Ivan / Kurtash, Iryna	Strength of Plate with the Filled Crack under Multiparameter Loading	1482-1487
Kastratović, Gordana / Aldarwish, Mustafa / Grbović, Aleksandar / Vidanović, Nenad / Eldwaib, Khalid	Stress intensity factor for multiple cracks on curved panels	469-474
Wu, Weijian / Kolstein, Henk / Veljković, Milan	Stress intensity factors of the rib-to-deck welded joint at the crossbeam conjunction in OSDs	2017-2023
Veg, Emil / Sedmak, Aleksandar / Šiniković, Goran / Regodić, Mladen	Structural Integrity Assessment by Using Cross-Correlated Modal Identification	2245-2248
Lesiuk, G. / Junik, K. / Smolnicki, M. / Correia, J. A. F. O. / de Jesus, A. M. P. / Babiarczuk, B. / Otczyk, K.	Structural integrity assessment of rigid polyurethane components using energy methods	1595-1599
Radu, Dorin / Gălăţanu, Teofil / Sedmak, Simon	Structural integrity of butt welded connection after fire exposure	1082-1087
Seghier, Mohamed / Keshtegar, Behrooz / Correia, José / de Jesús, Abílio / Lesiuk, G.	Structural Reliability Analysis of Corroded Pipeline made in X60 Steel Based on M5 Model Tree Algorithm and Monte Carlo Simulation	1670-1675
Petrov, Yuri / Kazarinov, Nikita	Structural-time nature of the dynamic instability of the fracture process	1620-1625
Perelmuter, Mikhail	Structures with bridged cracks and weak interfaces	793-798
Borrego, L. P. / Ferreira, J. A. M. / Costa, J. D. M. / Capela, C. / de Jesus, J.	A study of fatigue notch sensibility on titanium alloy TiAl6V4 parts manufactured by selective laser melting	1000-1005
Coré, A. / Kopp, J.-B. / Girardot, J. / Viot, P.	Study of the dynamic fracture of hollow spheres under compression using the Discrete Element Method	1378-1383
Mazighi, Hichem / Mihoubi, Mustapha Kamel	Study of the effect of upstream slope on water pressure in concrete gravity dam	1438-1441
Haq, Israr ul / Weiguo, Guo / Arif, Mariyam / Sheikh, Muhammad Zakir	Study of Various Conical Projectiles Penetration into Inconel-718 Target	1955-1960
Adam, Marcel / Kontermann, Christian / Oechsner, Matthias	A study on failure of double-layer thermal barrier coatings subjected to uniaxial compression tests using acoustic emission analysis and digital image correlation	1226-1231
Nara, Yoshitaka / Takeda, Hiroyuki	Subcritical crack growth in sandstone in aqueous environment with different calcium ion concentration	222-225
Martín-Meizoso, A. / Martinez-Esnaola, J. M. / Arrazola, P. J. / Linaza, A.	Surface machining condition and fatigue life on Inconel 718	1609-1614
Fomin, Fedor / Klusemann, Benjamin / Kashaev, Nikolai	Surface modification methods for fatigue properties improvement of laser-beam-welded Ti-6Al-4V butt joints	273-278
Boukert, B. / Benkhedda, A. / Adda, E. B. / Khodjet-Kesba, M.	Temperature and Humidity Influence Analysis on the Behavior of Thick Composite Plates Using High Order Theory	174-180
Astafurova, Elena / Moskvina, Valentina / Maier, Galina / Galchenko, Nina / Melnikov, Eugene / Astafurov, Sergey / Gordienko, Antonina / Burlachenko, Alexander	Temperature Dependence of Tensile Deformation and Fracture Micromechanisms in V-Alloyed High-Nitrogen Steel: Effect of Solution-Treatment Temperature	1129-1134
Selyutina, N. S. / Petrov, Yu. V.	Temporal effects of dynamic yielding under high-rate loading	700-704
Raghavendra, S. / Molinari, A. / Fontanari, V. / Luchin, V. / Zappini, G. / Benedetti, M. / Johansson, F. / Klarin, J.	Tensile and compression properties of variously arranged porous Ti-6Al-4V additively manufactured structures via SLM	149-154
Mega, Mor / Banks-Sills, Leslie	Testing of Brazilian Disk Specimens With a Delamination Between a Transversely Isotropic and a Tetragonal Composite Ply	123-130
Zagorac, D. / Zagorac, J. / Djukic, M. / Jordanov, D. / Rosic, M. / Cebela, M. / Lukovic, J. / Maksimovic, V. / Matović, B.	Theoretical investigation of structural, mechanical, elastic and vibrational properties of advanced materials under extreme conditions	2005-2010
Akçay, Fuzuli Ağrı	Theoretical Prediction of Fracture of Initially Crack-Free Brittle Materials	1695-1701
Kostina, A. / Zhelnin, M. / Plekhov, O.	Thermo-Mechanical Model of Steam Injection in Porous Media	1159-1164
Mikami, Yoshiki / Kitano, Houichi / Kawabata, Tomoya	Through Process Modeling of the Fracture Toughness Test of Multipass Welds Incorporating Residual Stress Distribution	1804-1810
Vavrik, Daniel / Beneš, Pavel / Fíla, Tomáš / Koudelka, Petr / Kumpová, Ivana / Kytýř, Daniel / Vopálenský, Michal / Vavro, Martin / Vavro, Leona	Tomographic investigation of the fracture toughness of the quasi-brittle specimens subjected to four-point bending test	1967-1970
Bolzon, Gabriella / Talassi, Marco	Toward a non-destructive diagnostic analysis tool of exercises pipelines: models and experiences	648-651
Singh, Vishal / Singh, Rajwinder / Singh, Amanjot / Mahajan, Dhiraj K.	Tracking hydrogen embrittlement using short fatigue crack behavior of metals	1427-1432
Berto, Filippo / Sandnes, Lise / Abbatinali, Filippo / Grong, Øystein / Ferro, Paolo	Using the Hybrid Metal Extrusion & Bonding (HYB) Process for Dissimilar Joining of AA6082-T6 and S355	249-254
Polyanskiy, A. M. / Polyanskiy, V. A. / Frolova, K. P. / Yakovlev, Yu. A.	Vacuum vs argon technology for hydrogen measurement	1408-1413
Simpson, C. A. / Tonge, S. / Cinar, A. / Reinhard, C. / Marrow, T. J. / Mostafavi, M.	Validating 3D two-parameter fracture mechanics for structural integrity assessments	965-970
Kouzoumis, Konstantinos / Hadley, Isabel / Mostafavi, Mahmoud	Validation of BS 7910; assessing the integrity of pipes containing axial flaws	868-876
Bolognesi Donato, Gustavo Henrique / Moreira, Felipe Cavalheiro	Validity limits of the one-parameter elastic-plastic fracture mechanics (J-integral) considering SE(B), C(T) and clamped SE(T) specimens	1879-1887
Seleznev, M. / Gleinig, J. / Wong, K. Y. / Weidner, A. / Biermann, H.	Very high cycle fatigue behaviour of 42CrMo4 steel with plate-like alumina inclusions	2071-2076
Monka, Peter / Monkova, Katarina / Uban, Marek / Hruzik, Lumir / Vasina, Martin	Vibrodiagnostics as the tool of a tap wear monitoring	959-964
Reis, P. N. B. / Gorbatikh, L. / Ivens, J. / Lomov, S. V.	Viscoelastic Behaviour of Self-reinforced Polypropylene Composites under Bending Loads	1999-2004
Selyutina, N. S. / Petrov, Yu. V.	The water-saturation effect for concretes and rocks subjected to high strain rates	705-709
Djoković, Jelena / Nikolić, Ružica / Hadzima, Branislav / Arsić, Dušan / Trško, Libor	Working life estimate of the tubular T-joint by application of the LEFM concept	334-339

About this
data sheet
IssueID
60057
Published on:
04/12/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Procedia Structural Integrity - 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Procedia Structural Integrity - 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.