Procedia Structural Integrity - 2017

Published:	2017

Articles in this Issue

Author(s)	Title	Page(s)
Baláž, Ivan / Koleková, Yvona	45 years of cable-stayed SNP Bridge in Bratislava	1057-1064
Martini, Rachel / Carvalho, Jorge / Barraca, Nuno / Arêde, António / Varum, Humberto	Advances on the use of non-destructive techniques for mechanical characterization of stone masonry: GPR and sonic tests	1108-1115
Borrego, L. F. P. / Antunes, F. V. / Ferreira, J. A. M. / Costa, J. D. / Capela, C.	Analysis of fatigue crack propagation in laser sintering metal	239-246
Teixeira, Rui / O’Connor, Alan / Nogal, Maria / Krishnan, Nandakumar / Nichols, James	Analysis of the design of experiments of offshore wind turbine fatigue reliability design with Kriging surfaces	951-958
Alvarez, J. A. / Lacalle, R. / Arroyo, B. / Sainz-Aja, J. / Sosa, I. / Alonso, C.	Analysis of the environmental degradation effects on the cables of "La Arena" bridge (Spain)	55-62
Strzelecki, Przemyslaw / Tomaszewski, Tomasz	Analytical models of the S-N curve based on the hardness of the material	832-839
Examilioti, Theano N. / Klusemann, Benjamin / Kashaev, Nikolai / Riekehr, Stefan / Enz, Josephin / Alexopoulos, Nikolaos D.	Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy	13-18
Nazarko, Piotr / Ziemiański, Leonard	Anomaly detection in composite elements using Lamb waves and soft computing methods	131-138
Andrade, Pedro / Santos, José / Escórcio, Patrícia	Application of the Effective Impulse Approach to Stairs	1318-1325
Madia, M. / Ngoula, D. Tchoffo / Zerbst, U. / Beier, H. Th.	Approximation of the crack driving force for cracks at notches under static and cyclic loading	875-882
Schaefer, Florian / Lang, Eric P. W. / Bick, Michael / Knorr, Alain F. / Marx, Michael / Motz, Christian	Assessing the intergranular crack initiation probability of a grain boundary distribution by an experimental misalignment study of adjacent slip systems	547-554
Singh, Kulbir / Robertson, C. / Bhaduri, A. K.	Assessing the Irradiation Defect Induced Changes using Dislocation Based Crystal Plasticity Model for BCC Materials	294-301
Wichtowski, B. / Hołowaty, J.	Assessment of fatigue limits in historical welded railway bridges in Poland	1035-1042
Moussaoui, B. / Ait Tahar, K. / Bouamra, Y.	Behavior of damaged concrete cylinders passively confined	163-170
Flores, Andreia / Marques, Arcelina / Machado, Joana / Marta, Miguel / Vaz, Mário	Bone Immobilization devices and consolidation mechanisms: Impact on healing time	34-39
Sieber, Lars / Stroetmann, Richard	The brittle fracture behaviour of old mild steels	1019-1026
Lepov, Valeriy / Grigoriev, Albert / Bisong, Mbelle Samuel / Lepova, Kyunna	Brittle Fracture Modeling for Steel Structures operated in the Extreme	777-784
Kepka, Miloslav	Calculations of fatigue life of a welded joint in the construction of the trolleybus rear axle	1409-1416
Raposo, P. C. / Martins, J. / Correia, J. A. F. O. / Salavessa, M. E. / Reis, C. / Xavier, J. M. C. / de Jesus, A. M. P.	Characterization of the Tensile Mechanical Behavior of Wooden Construction on Materials from Historic Building	1086-1091
Serov, Alexander	Cognitive Sensor Technology for Structural Health Monitoring	1160-1167
Okorokov, Volodymyr / Gorash, Yevgen	A comparative study between conventional and elevated temperature creep autofrettage	202-209
Saifi, A. / El-amiri, A. / Halloua, H. / Elhassnaoui, A. / Sahnoun, S. / Errami, Y. / Obbadi, A.	Comparison between a neural model and a thermographic model in estimating the thickness of scale in water pipes	1267-1274
Engin, Zafer / Coker, Demirkan	Comparison of Equivalent Stress Methods with Critical Plane Approaches for Multiaxial High Cycle Fatigue Assessment	1229-1236
Hashemi, Bahman / Maljaars, Johan / Leonetti, Davide / Snijder, H. H. (Bert)	Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint	959-966
Martin, Garan / Vladimír, Chmelko	Conditions for Long-term Monitoring of Safety in Operation of Pipelines	614-619
Barile, C. / Casavola, C. / Pappalettere, C.	Corrosion effects on mechanical properties of sintered stainless steels	195-201
Shardakov, Igor / Bykov, Anton / Shestakov, Aleksey / Glot, Irina	Crack control in concrete using shock wave techniques	210-216
Paolino, Davide S. / Tridello, Andrea / Chiandussi, Giorgio / Rossetto, Massimo	Crack growth from internal defects and related size-effect in VHCF	247-254
Judt, Paul / Zarges, Jan-Christoph / Ricoeur, Andreas / Heim, Hans-Peter	Crack path predictions in fiber reinforced composites	769-776
Machado, Joana / Almeida, Paulo / Fernandes, Sampaio / Marques, Arcelina / Vaz, Mário	Currently used systems of dental posts for endodontic treatment	27-33
Tsvetkov, R. / Shardakov, I. / Shestakov, A. / Gusev, G. / Epin, V.	Deformation monitoring of load-bearing reinforced concrete beams	620-626
Izumi, Yui / Uenishi, Koki / Mizokami, Yoshiaki / Moriyama, Akira / Sakagami, Takahide	Detection of back-surface crack based on temperature gap measurement	683-688
El-amiri, Asseya / Saifi, Abderrahim / Halloua, Hicham / Obbadi, Abdellatif / Errami, Youssef / Elhassnaoui, Ahmed / Sahnoun, Smail	Detection of corrosion depth in bolts by thermographic model	1065-1071
Maia, Lino / Neves, Diana	Developing a Commercial Self-Compacting Concrete Without Limestone Filler and With Volcanic Aggregate Materials	147-154
Tiwari, Kumar Anubhav / Raišutis, Renaldas / Mažeika, Liudas / Samaitis, Vykintas	Development of a 2D analytical model for the prediction of directivity pattern of transducers in the generation of guided wave modes	973-980
Barros, Francisco / Sousa, Pedro J. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	A DFT-based method for 3D digital image correlation	1260-1266
Eremin, A. / Panin, S. / Sunder, R. / Berto, F.	DIC Study of Fatigue Crack Growth after Single Overloads and Underloads	889-895
Sousa, Pedro J. / Barros, Francisco / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Displacement measurement and shape acquisition of an RC helicopter blade using Digital Image Correlation	1253-1259
Katunin, Andrzej	Domination of self-heating effect during fatigue of polymeric composites	93-98
Min, Xu / Santos, Luís Oliveira	Dynamic Assessment of the São João Bridge Structural Integrity	325-331
Ryjáček, Pavel / Polák, Michal / Plachy, Tomas / Kašpárek, Jiří	The dynamic behavior of the extremely skew railway bridge "Oskar"	1051-1056
Prato, C. A. / Pinto, F. / Ceballos, M. A. / Prato, A. M. / Gerbaudo, C. F.	Dynamic Tests for Assessment of Pedestrian Comfort for Design of a Stayed Highway Bridge	332-339
Capela, C. / Oliveira, S. E. / Pestana, J. / Ferreira, J. A. M.	Effect of fiber length on the mechanical properties of high dosage carbon reinforced	539-546
Tanabe, Hirotaka / Izumi, Yui / Takamatsu, Tohru / Nakamura, Yuki	Effect of Laser Power on Delamination Initiation Behaviour of CrAlN Coating on Steel Substrate Laser-Quenched after Coating Process under Rolling Contact Fatigue	1005-1010
Seitl, Stanislav / Miarka, Petr / Kala, Zdenek / Klusak, Jan	Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure	697-704
Farahani, Behzad V. / Belinha, Jorge / Tavares, Paulo J. / Moreira, P. M. G. P.	An Elasto-plastic Analysis of a DP600 Bi-Failure Specimen: Digital Image Correlation, Finite Element and Meshless Methods	1237-1244
Alena, Terekhina / Kostina, Anastasiia / Oleg, Plekhov / Luca, Susmel	Elasto-plastic TCD as a method of failure prediction	569-576
Lesiuk, G. / Szata, M. / Rozumek, D. / Marciniak, Z. / Correia, J. A. F. O. / de Jesus, A. M. P.	Energy description of fatigue crack growth process - theoretical and experimental approach	904-911
Ahmed, Amal ben / Nasr, Anouar / Bahloul, Ahmad / Fathallah, Raouf	An Engineering Predictive Approach of Kitagawa-Takahashi Diagrams of defective A356-T6 alloy considering SDAS dispersion	524-530
Tashkinov, Mikhail / Spaskova, Elena	Estimation of microstructural failure probability based on restoration of the field distributions laws in components of heterogenous media	608-613
Braz-César, M. / Ribeiro, J. / Lopes, H.	Estimation of the dynamic modal parameters of a small-scaled mockup	347-354
Tomaszewski, Tomasz / Strzelecki, Przemysław	Estimation of the impact stress gradient in the range of size effect	840-847
Kayamori, Yoichi / Kawabata, Tomoya	Evaluation of rotational deformation in compact specimens for CTOD fracture toughness testing	286-293
Naib, Sameera / De Waele, Wim / Štefane, Primož / Gubeljak, Nenad / Hertelé, Stijn	Evaluation of slip line theory assumptions for integrity assessnment of defected welds loaded in tension	1417-1424
Peral, L. B. / Zafra, A. / Rodríguez, C. / Belzunce, J.	Evaluation of strength and fracture toughness of ferritic high strength steels under hydrogen environments	1275-1282
Curà, Francesca / Mura, Andrea	Evaluation of the fretting wear damage on crowned splined couplings	1393-1400
Katunin, Andrzej / Wronkowicz, Angelika	Evolution of a fracture mechanism in a polymeric composite subjected to fatigue with the self-heating effect	416-421
Bär, Jürgen / Tiedemann, Dominic	Experimental investigation of short crack growth at notches in 7475-T761	793-800
Abd-Elhady, Amr A. / Sallam, Hossam El-Din M. / Mubaraki, Muhammad A.	Failure Analysis of Composite Repaired Pipelines with an Inclined Crack under Static Internal Pressure	123-130
Witek, Lucjan / Stachowicz, Feliks / Załęski, Arkadiusz	Failure investigation of the crankshaft of diesel engine	369-376
Dabiri, M. / Björk, T.	Fatigue analysis of notched specimens made of direct-quenched ultra-high-strength steel under constant amplitude loading	385-392
Kratochvilova, Vendula / Vlasic, Frantisek / Mazal, Pavel / Paloušek, David	Fatigue Behaviour Evaluation of Additively and Conventionally Produced Materials by Acoustic Emission Method	393-400
Homola, Petr / Kadlec, Martin / Růžek, Roman / Šedek, Jakub	Fatigue behaviour of tailored blank thermoplastic composites with internal ply-drops	1342-1348
Yang, Dong / Wang, Jinqi / Li, Dan / Kuang, K. S. C.	Fatigue crack monitoring using plastic optical fibre sensor	1168-1175
Boljanovic, Slobodanka / Maksimovic, Stevan	Fatigue damage analysis of wing-fuselage attachment lug	801-808
Curà, Francesca / Mura, Andrea / Adamo, Federica	Fatigue damage in spline couplings: numerical simulations and experimental validation	1326-1333
Krejsa, Martin / Seitl, Stanislav / Brozovsky, Jiri / Lehner, Petr	Fatigue damage prediction of short edge crack under various load: Direct Optimized Probabilistic Calculation	1283-1290
Eslami, Shayan / Tavares, Paulo J. / Moreira, P. M. G. P.	Fatigue Life Assessment of Friction Stir welded Dissimilar Polymers	1433-1438
Liu, Z. / Hebdon, M. H. / Correia, J. A. F. O. / Carvalho, H. / Vilela, P. / de Jesus, A. M. P. / Calçada, R. A. B.	Fatigue Life Evaluation of Critical Details of the Hercílio Luz Suspension Bridge	1027-1034
Lesiuk, G. / Zimniak, Z. / Wiśniewski, W. / Correia, J. A. F. O.	Fatigue lifetime improvement in AISI 304 stainless steel due to high-density electropulsing	928-934
Zhu, Shun-Peng / Liu, Qiang / Yu, Zheng-Yong / Liu, Yunhan	Fatigue reliability analysis of a turbine disc under multi-source uncertainties	967-972
Zerbst, U. / Madia, M. / Vormwald, M.	Fatigue strength and fracture mechanics	745-752
Vantadori, Sabrina / Boaretto, Joel / Fortese, Giovanni / Giordani, Felipe / Rodrigues, Roberto Isoppo / Iturrioz, Ignacio / Ronchei, Camilla / Scorza, Daniela / Zanichelli, Andrea	Fatigue strength of welded joints under multiaxial non-proportional loading	761-768
Raška, Jan	FE Mesh Generation – Automated Crack Grow Modeling with a View to Stress Intensity Factor Computing	225-232
Angulo, Ángela / Allwright, Jane / Mares, Cristinel / Gan, Tat-Hean / Soua, Slim	Finite Element Analysis of Crack Growth for Structural Health Monitoring of Mooring Chains using Ultrasonic Guided Waves and Acoustic Emission	217-224
Korkmaz, Yezdan M. / Coker, Demirkan	Finite element analysis of fretting contact for dissimilar and nonhomogeneous materials	452-459
Nazarko, Piotr / Ziemiański, Leonard	Force identification in bolts of flange connections for structural health monitoring and failure prevention	460-467
Kayamori, Yoichi / Kawabata, Tomoya / Hagihara, Yukito	Formulation of CTOD design curve considering the yield to tensile ratio	279-285
Pantazopoulos, George / Vazdirvanidis, Athanasios	Fracture analysis and embrittlement phenomena of machined brass components	476-483
Farahani, Behzad V. / Tavares, Paulo J. / Belinha, Jorge / Moreira, P. M. G. P.	A Fracture Mechanics Study of a Compact Tension Specimen: Digital Image Correlation, Finite Element and Meshless Methods	920-927
Bernardi, Patrizia / Michelini, Elena / Sirico, Alice / Vantadori, Sabrina / Zanichelli, Andrea	Fracture toughness of fibre-reinforced concrete determined by means of numerical analysis	848-855
Kujawski, Daniel / Teo, Joshua L. K.	A Generalization of Neuber's Rule for Numerical Applications	883-888
Cividini, Annamaria	Geomechanical characterization of some adobe materials	1072-1077
Farahani, Behzad V. / Amaral, Rui / Belinha, Jorge / Tavares, Paulo J. / Moreira, Pedro	A GTN Failure Analysis of an AA6061-T6 Bi-Failure Specimen	981-988
Małek, Ewelina / Miedzińska, Danuta / Stankiewicz, Michał	Heat resistance research and surface analysis of fireproof textiles with titanium silicide coating	508-515
Sniezek, Lucjan / Szachogluchowicz, Ireneusz / Wachowski, Marcin / Torzewski, Janusz / Mierzynski, Janusz	High cycle fatigue properties of explosively welded laminate AA2519/AA1050/Ti6Al4V	422-429
Toribio, Jesús	Hydrogen Effects on Progressively Cold-Drawn Pearlitic Steels: Between Donatello and Michelangelo	1446-1453
Iordachescu, Mihaela / de Abreu, Maricely / Valiente, Andrés	Hydrogen Induced Damage in Heavily Cold-Drawn Wires of Lean Duplex Stainless Steel	1304-1309
Toribio, Jesús / Kharin, Viktor	Hydrogen Transport to Fracture Sites in Metals and Alloys: Multiphysics Modelling	1291-1298
Boukert, B. / Benkhedda, A. / Bedia, E. A. Adda / Khodjet-Kesba, M.	Hygrothermomechanical Behavior of Thick Composite Plates Using High Order Theory	115-122
Okeke, C. P. / Thite, A. N. / Durodola, J. F. / Greenrod, M. T.	Hyperelastic polymer material models for robust fatigue performance of automotive LED lamps	600-607
Sarego, Giulia / Cappellini, Lorenzo / Zaccariotto, Mirco / Galvanetto, Ugo	Impact force reconstruction in composite panels	107-114
Mocian, Oana / Constantinescu, Dan Mihai / Sandu, Marin / Sorohan, Stefan	Impact response of polyurethane and polystyrene sandwich panels	653-658
Lesiuk, G. / Katkowski, M. / Duda, M. / Królicka, A. / Correia, J. A. F. O. / de Jesus, A. M. P. / Rabiega, J.	Improvement of the fatigue crack growth resistance in long term operated steel strengthened with CFRP patches	912-919
Zampieri, Paolo / Curtarello, Andrea / Maiorana, Emanuele / Pellegrino, Carlo / Rossi, Nicola De / Savio, Gianpaolo / Concheri, Gianmaria	Influence of corrosion morphology on the Fatigue strength of Bolted joints	409-415
Panin, S. V. / Vlasov, I. V. / Marushchak, P. O. / Eremin, A. V. / Byakov, A. V. / Berto, F. / Vinogradov, A.Yu. / Syromyatnikova, A. S. / Stankevich, R.	Influence of long-term operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel	401-408
Kõrgesaar, Mihkel / Romanoff, Jani / Remes, Heikki	Influence of material non-linearity on load carrying mechanism and strain path in stiffened panel	713-720
Lopes, H. / Araújo dos Santos, J. V. / Moreno-García, P. / Monteiro, J.	Influence of shearing amount and vibration amplitude on noise in shearography	1205-1212
Smaga, Marek / Skorupski, Robert / Mayer, Patrick / Kirsch, Benjamin / Aurich, Jan C. / Raid, Indek / Seewig, Jörg / Man, Jiří / Eifler, Dietmar / Beck, Tilmann	Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C	989-996
Nunes, Pedro / Silva Lobo, Paulo	Influence of the SMA Constitutive Model on the Response of Structures	187-194
Panteleev, I. / Kostina, A. / Zhelnin, M. / Plekhov, A. / Levin, L.	Intellectual monitoring of artificial ground freezing in the fluid-saturated rock mass	492-499
Arslan, Barış / Kamas, Tuncay	Investigation of aggregate size effects on the compressive behavior of concrete by electromechanical and mechanical impedance spectroscopy	171-178
Prabowo, Aditya Rio / Baek, Seung Jun / Byeon, Jung Hoon / Bae, Dong Myung / Cho, Joung Hyung / Sohn, Jung Min	Investigation on the Structural Damage of a Double-Hull Ship, Part I – Ship Collision	935-942
Prabowo, Aditya Rio / Cho, Hyun Jin / Lee, Seung Geon / Bae, Dong Myung / Sohn, Jung Min / Cho, Joung Hyung	Investigation on the Structural Damage of a Double-Hull Ship, Part II – Grounding Impact	943-950
Hannemann, Robert / Köster, Paul / Sander, Manuela	Investigations on crack propagation in wheelset axles under rotating bending and mixed mode loading	861-868
Folgar, Ribadas H. / Böddeker, T. / Chergui, A. / Ivanjko, M. / Gili, F. / Behrens, S.	Joining TWIP-Steel Simulation Models	516-523
Forrest, Chad / Forrest, Clint / Wiser, Doug	Landing Gear Structural Health Monitoring (SHM)	1153-1159
Yalchiner, Fikri Bashar / Barsoum, Zuheir	Life Extension of Welded Structures Using HFMI Techniques - Potential Application to Offshore Structures	377-384
Urbanek, Ralf / Bär, Jürgen	Lock-In Thermographic Stress Analysis of notched and unnotched specimen under alternating loads	785-792
Lokaj, Antonín / Vavrusova, Kristyna	Longitudinal bonded joints of timber beams using plywood and LVL plates	1363-1369
Maia, Lino / Alves, Sérgio	Low durability of concrete elements due to steel corrosion – cases wherein the steel reinforcing bars acted as an internal clock bomb	139-146
Lu, Jin / Ventzke, Volker / Huber, Norbert / Nikolai Kashaev, and	Material Influence on Crenellation Effectiveness in Damage Tolerant Design	263-270
Pourhassan, Sahand / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Material properties of 2024-T3 ALCLAD and 2124-T851 aluminum alloys using 2D and 3D Digital Image Correlation techniques	1355-1362
El Amri, Abdelouahid / El Yakhloufi Haddou, Mounir / Khamlichi, Abdellatif	Measurement of Dynamic Fracture in Hot Forming Processing : Effect of Steel Elongation and Temperature	363-368
Bouamra, Y. / Ait Tahar, K.	Mechanical performance of a confined reinforced concrete beam	155-162
Constantinescu, Dan M. / Apostol, Dragos A. / Picu, Catalin R. / Krawczyk, Krzysztof / Sieberer, Manfred	Mechanical properties of epoxy nanocomposites reinforced with functionalized silica nanoparticles	647-652
Raposo, Patrícia C. / Correia, José A. F. O. / Sousa, Dinis / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Mechanical Properties of Wood Construction Materials from a Building from the 19th Century	1097-1101
Tashkinov, Mikhail / Matveenko, Valeriy	Method of assessment of mechanical characteristics of quasi-isotropic composite laminates using experimental data from fiber- optic strain sensors	577-583
Vladimír, Chmelko / Matúš, Margetin	The methodology of transformation of the nominal loading process into a root of notch	825-831
Bolzon, Gabriella / Rivolta, Barbara / Nykyforchyn, Hryhoriy / Zvirko, Olha	Micro and macro mechanical analysis of gas pipeline steels	627-632
Bonnaud, Etienne	Mitigation of weld residual deformations by weld sequence optimization: limitations and enhancements of surrogate models	310-317
Mubaraki, M. A. / Abd-Elhady, A. A. / Osman, S. A. / Sallam, H. E. M.	Mixed mode fracture behavior of concrete pavement containing RAP - 3D finite element analysis	19-26
Rozumek, D. / Marciniak, Z. / Lesiuk, G. / Correia, J. A. F. O.	Mixed mode I/II/III fatigue crack growth in S355 steel	896-903
Droubi, M. G. / Mcafee, J. / Horne, R. C. / Walker, S. / Klaassen, C. / Crawford, A. / Prathuru, A. K. / Faisal, N. H.	Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods	40-47
Biglar, Mojtaba / Stachowicz, Feliks / Trzepiecinski, Tomasz / Gromada, Magdalena	Modelling of Barium Titanate Microstructure Based on Both the Boundary Element Method and a Homogenization Technique	562-568
Mohamed, Khodjet-Kesba / Amina, Benkhedda / Bedia, Adda / billel, Boukert	Moisture absorption effect on the stress distribution of the cross-ply laminates with transverse matrix cracks	271-278
Halloua, H. / Elhassnaoui, A. / Saifi, A. / Elamiri, A. / Obbadi, A. / Errami, Y. / Sahnoun, S.	Neural networks and genetic algorithms for the evaluation of coatings thicknesses in thermal barriers by infrared thermography data	997-1004
Liu, Yunhan / Zhu, Shun-Peng / Yu, Zheng-Yong / Liu, Qiang	A new energy gradient-based model for LCF life prediction of turbine discs	856-860
Miedzińska, Danuta	New Method of Numerical Homogenization of Functionally Graded Materials	484-491
Raposo, Patrícia C. / Andrade, Michael / Correia, José A. F. O. / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Non-Destructive Structural Wood Diagnosis of a Medieval Building	1147-1152
Kostina, Anastasiia / Terekhina, Alena / Plekhov, Oleg	A Non-local Damage Model for Brittle Fracture in Metallic Structures with Stress Concentrators	302-309
Samadian, Kaveh / Hertelé, Stijn / De Waele, Wim	A novel flaw alignment approach based on the analysis of bands of maximum strain using full-field deformation measurements	1245-1252
Ben Fekih, Lassaad / Verlinden, Olivier / De Fruytier, Christophe / Kouroussis, Georges	Novel test prototype for the determination of mode I fracture parameters: application to adhesively bonded electronics	5-12
Zampieri, Paolo / Curtarello, Andrea / Maiorana, Emanuele / Pellegrino, Carlo	Numerical analyses of corroded bolted connections	592-599
Heimbs, Sebastian / Fischer, Ulrich / Theiler, Willy / Steenbergen, Frederik	Numerical Analysis of Bird Strike Resistance of Helicopter Searchlight	689-696
Seitl, Stanislav / Miarka, Petr / Sobek, Jakub / Klusak, Jan	A numerical investigation of the stress intensity factor for a bent chevron notched specimen: Comparison of 2D and 3D solutions	737-744
Brusa, Eugenio / Sesana, Raffaella / Ossola, Enrico	Numerical modeling and testing of mechanical behavior of AM Titanium alloy bracket for aerospace applications	753-760
Raposo, Patrícia C. / Andrade, Michael / Correia, José A. F. O. / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Numerical Modelling of a Wood Pavement of a 13th Century Building	1141-1146
Almeida, Diogo F. / Martins, Rui F. / Cardoso, João B.	Numerical simulation of residual stresses induced by TIG butt-welding of thin plates made of AISI 316L stainless steel	633-639
Paarmann, Maria / Mutschler, Patrick / Sander, Manuela	Numerical studies of the residual lifetime of power plant components based on experimental results at elevated temperatures	869-874
Araújo dos Santos, J. V. / Lopes, H. / Moreno-García, P.	Numerical study on damage identification using shearography with different shearing amounts	1198-1204
Eremeyev, Victor A. / Skrzat, Andrzej / Stachowicz, Feliks / Vinakurava, Anastasia	On strength analysis of highly porous materials within the framework of the micropolar elasticity	446-451
Farahani, Behzad V. / Belinha, Jorge / Tavares, Paulo J. / Moreira, P. M. G. P.	On the Non-linear Elasto-Plastic Behavior of AA6061-T6: Experimental and Numerical Implementations	468-475
Baptista, R. / Claudio, R. A. / Reis, L. / Madeira, J. F. A. / Freitas, M.	Optimal Cruciform Specimen Design Using the Direct Multi-search Method and Design Variable Influence Study	659-666
Santus, C. / Taylor, D. / Benedetti, M.	Optimal notched specimen parameters for accurate fatigue critical distance determination	817-824
Ribeiro, João Eduardo / César, Manuel Braz / Lopes, Hernâni	Optimization of machining parameters to improve the surface quality	355-362
Farahani, Behzad V. / Berardo, Jose / Belinha, Jorge / Ferreira, A. J. M. / Tavares, Paulo J. / Moreira, Pedro	An Optimized RBF Analysis of an Isotropic Mindlin Plate in Bending	584-591
Toribio, Jesús / Matos, Juan-Carlos / González, Beatriz	Paris Law-Based Approach to Fatigue Crack Growth in Notched Plates under Tension Loading	1299-1303
Raposo, Patrícia C. / Correia, José A. F. O. / Sousa, Dinis / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Pathological Inspection of Structural Masonry Walls of a Late-Romantic Historical Building	1102-1107
Raposo, P. C. / Correia, J. A. F. O. / Sousa, D. / Salavessa, M. E. / Reis, C. / Oliveira, C. / de Jesús, Abílio	Petrographic Characterization of Partition Wall Mortars of a 19th Century Building	1092-1096
Oliveira, Rosário	Plans of Control, Measurement and Monitoring with Risk Assessment Application to Rehabilitation works	1129-1135
Borrego, L. F. P. / Costa, J. D. / Ferreira, JA M.	Plasticity induced closure under variable amplitude loading in AlMgSi aluminum alloys	85-92
Alexandrescu, L. / Sonmez, M. / Georgescu, M. / NiŢuicĂ, M. / Ficai, A. / Trusca, R. / GurĂu, D. / Tudoroiu, L.	Polyamide/Polypropylene/graphene oxide nanocomposites with functional compatibilizers: Morpho-structural and physico-mechanical characterization	675-682
Alexandrescu, L. / Sonmez, M. / Georgescu, M. / NiŢuicĂ, M. / Ficai, A. / Trusca, R. / GurĂu, D.	Polymer nanocomposites PE/PE-g-MA/EPDM/nanoZnO and TiO2 dynamically crosslinked with sulphur and accelerators	667-674
Romano, F. / Mercurio, U.	Potentiality of SHM and PFA for a new design approach of low weight aircraft structures	721-728
Antunes, Vanessa / Candeias, António / Mirão, José / Carvalho, Maria L. / Serrão, Vitor / Dias, Cristina Barrocas / Manhita, Ana / Reis, Mónica Esteves / Manso, Marta	Preserving European paintings in Asian environment. The case of Goa Cathedral former altarpiece.	1078-1085
Bahloul, Ahmed / Ahmed, Amal ben / Bouraoui, Chokri	Probabilistic fatigue crack growth assessment of Al 7075-T6 aerospace component	430-437
Delprete, Cristiana / Sesana, Raffaella	Proposal of a stress-based isothermal LCF life model for Aluminium alloy cylinder heads	531-538
Andrade, Pedro / Santos, José / Maia, Lino	Reinforcement Measures to Reduce the Human Induced Vibrations on Stair Steps – A Case Study	1310-1317
Hammoum, H. / Bouzelha, K. / Imerzoukene, L. / Ouharoun, M.	Reliability analysis of Reno mattress for canals	69-76
Bouzelha, K. / Hammoum, H. / Amirouche, C. / Chaouadi, T.	Reliability analysis of stability to sliding of earthen embankment under seismic effect	77-84
Issam, Aalil / Kevin, Beck / Xavier, Brunetaud / Dalal, Badreddine / Khalid, Cherkaoui / Ali, Chaaba / Muzahim, Al-Mukhtar	Restoration mortars for the Volubilis calcarenite stone	1123-1128
Leander, John / Honfi, Dániel / Björnsson, Ivar	Risk-based planning of assessment actions for fatigue life prediction	1221-1228
Morais, J. / de Morais, P. Gil / Santos, C. / Campos Costa, A. / Candeias, P.	Shape Memory Alloy Based Dampers for Earthquake Response Mitigation	705-712
Tiwari, Kumar Anubhav / Raišutis, Renaldas / Samaitis, Vykintas	Signal processing methods to improve the Signal-to-noise ratio (SNR) in ultrasonic non-destructive testing of wind turbine blade	1184-1191
Correia, Ruben / Silva Lobo, Paulo	Simplified Assessment of the Effects of Columns Shortening on the Response of Tall Concrete Buildings	179-186
Tretyakov, M. P. / Wildemann, V. E.	Stable crack growth in composite laminates under various stiffness of the loading system	233-238
Cerveira, Adelaide / Correia, Elisete / Cristelo, Nuno / Miranda, Tiago / Castro, Fernando / Fernández-Jiménez, Ana	Statistical Analysis of the Influence of Several Factors on Compressive Strength of Alkali Activated Fly Ash	1116-1122
Toribio, Jesús	Stress Corrosion Cracking of Progressively Cold-Drawn Pearlitic Steels: From Tintoretto to Picasso	1439-1445
Matveenko, V. P. / Shardakov, I. N. / Kosheleva, N. A. / Fedorov, A.Yu.	Stress state analysis and optimization in the vicinity of the sensor of SMART-material	99-106
Kec, Jan / Černý, Ivo	Stress-strain assessment of dents in wall of high pressure gas pipeline	340-346
Raposo, Patrícia C. / Correia, José A. F. O. / Andrade, Michael / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Structural Characterization of 13th Century Building placed in Trás-os-Montes Region	1136-1140
Kyprianou, Andreas / Tjirkallis, Andreas	Structural damage detection of a cantilever beam under varying temperature using a collection of time series	1192-1197
Carvajal-Castrillón, Alejandro / Alvarez-Montoya, Joham / Niño-Navia, Juliana / Betancur-Agudelo, Leonardo / Amaya-Fernández, Ferney / Sierra-Pérez, Julián	Structural health monitoring on an unmanned aerial vehicle wing's beam based on fiber Bragg gratings and pattern recognition techniques	729-736
Soares, António / Martins, Rui F. / Mateus, António F. Rodrigues	Structural integrity analyses of two gas turbines exhaust systems used for naval propulsion	640-646
Díaz García, Manuel Ángel / González, Sergio Cicero / Ramos Gutiérrez, Óscar Ramón	Structural Integrity Evaluation of the "Constitución de 1812 bridge", over the Cádiz bay (Cádiz, Spain)	1334-1341
Radu, Dorin / Sedmak, Aleksandar / Bancila, Radu	Structural integrity of a wind loaded cylindrical steel shell structure	1213-1220
Prokhorov, A. / Petrova, A. / Plekhov, O.	The Study of Evolution of Physical and Mechanical Properties of Metals Under Very High Cycle Fatigue	555-561
Vshivkov, A. / Iziumova, A. / Plekhov, O.	The study of the fatigue crack propagation in mixed mode crack growth	438-445
Tretyakova, Tatyana / Wildemann, Valery	Study of the spatial-time inhomogeneity of inelastic deformation and failure in bodies with concentrators by using the digital image correlation and infrared analysis	318-324
Curà, Francesca / Sesana, Raffaella	Surface factor assessment in HCF for steels by means of empirical and non destructive techniques	500-507
Gallo, P. / Romanoff, J. / Frank, D. / Karttunen, A. / Remes, H.	Synthesis of experimental testing and fatigue behavior of laser stake-welded T-joints on medium-high cycle fatigue range	809-816
Monteiro, Mafalda / Brito, Vítor / Mendonça, Tiago	Tagus river centenarian steel bridges’ rehabilitation	48-54
Kang, Jidong / Rao, Harish M. / Sigler, David R. / Carlson, Blair E.	Tensile and Fatigue Behaviour of AA6022-T4 to IF Steel Resistance Spot Welds	1425-1432
Nagel, Sven / Knödel, Peter / Ummenhofer, Thomas	Testing of Ultra-Low Cycle Fatigue at Complex Loading Scenarios	1377-1384
Yang, Xia / Zhang, Jing / Ren, Wei-Xin	Threshold selection for extreme strain extrapolation due to vehicles on bridges	1176-1183
Václavík, Jaroslav / Chvojan, Jan	Torsion vibrations monitoring of turbine shafts	1349-1354
Hołowaty, J.	Toughness tests on steels from old railway bridges	1043-1050
Sakagami, Takahide / Mizokami, Yoshiaki / Shiozawa, Daiki / Izumi, Yui / Moriyama, Akira	TSA based evaluation of fatigue crack propagation in steel bridge members	1370-1376
Barsoum, Zuheir / Khurshid, Mansoor	Ultimate Strength Capacity of Welded Joints in High Strength Steels	1401-1408
Kim, Hyung-Kyu	Uncertainties of the critical buckling pressure of a tube	63-68
Scheel, Johannes / Ricoeur, Andreas	Weak and strong bi-material interfaces and their influence on propagating cracks in plane elastic structures	255-262
Hvizdoš, Pavol / Balko, Ján / Fides, Martin / Chicardi, Ernesto	Wear damage of TiTaCN-Co cermets at room and elevated temperatures	1385-1392
Sieber, Lars / Kilian, Andrè / Flederer, Holger / Göbel, Gunther / Steinhauser, Marco	Weldability of old mild steels in maintenance of historical steel structures	1011-1018

About this
data sheet
IssueID
60051
Published on:
04/12/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Procedia Structural Integrity - 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Procedia Structural Integrity - 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.