Procedia Structural Integrity - 2017

Publié:	2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Baláž, Ivan / Koleková, Yvona	45 years of cable-stayed SNP Bridge in Bratislava	1057-1064
Martini, Rachel / Carvalho, Jorge / Barraca, Nuno / Arêde, António / Varum, Humberto	Advances on the use of non-destructive techniques for mechanical characterization of stone masonry: GPR and sonic tests	1108-1115
Borrego, L. F. P. / Antunes, F. V. / Ferreira, J. A. M. / Costa, J. D. / Capela, C.	Analysis of fatigue crack propagation in laser sintering metal	239-246
Teixeira, Rui / O’Connor, Alan / Nogal, Maria / Krishnan, Nandakumar / Nichols, James	Analysis of the design of experiments of offshore wind turbine fatigue reliability design with Kriging surfaces	951-958
Alvarez, J. A. / Lacalle, R. / Arroyo, B. / Sainz-Aja, J. / Sosa, I. / Alonso, C.	Analysis of the environmental degradation effects on the cables of "La Arena" bridge (Spain)	55-62
Strzelecki, Przemyslaw / Tomaszewski, Tomasz	Analytical models of the S-N curve based on the hardness of the material	832-839
Examilioti, Theano N. / Klusemann, Benjamin / Kashaev, Nikolai / Riekehr, Stefan / Enz, Josephin / Alexopoulos, Nikolaos D.	Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy	13-18
Nazarko, Piotr / Ziemiański, Leonard	Anomaly detection in composite elements using Lamb waves and soft computing methods	131-138
Andrade, Pedro / Santos, José / Escórcio, Patrícia	Application of the Effective Impulse Approach to Stairs	1318-1325
Madia, M. / Ngoula, D. Tchoffo / Zerbst, U. / Beier, H. Th.	Approximation of the crack driving force for cracks at notches under static and cyclic loading	875-882
Schaefer, Florian / Lang, Eric P. W. / Bick, Michael / Knorr, Alain F. / Marx, Michael / Motz, Christian	Assessing the intergranular crack initiation probability of a grain boundary distribution by an experimental misalignment study of adjacent slip systems	547-554
Singh, Kulbir / Robertson, C. / Bhaduri, A. K.	Assessing the Irradiation Defect Induced Changes using Dislocation Based Crystal Plasticity Model for BCC Materials	294-301
Wichtowski, B. / Hołowaty, J.	Assessment of fatigue limits in historical welded railway bridges in Poland	1035-1042
Moussaoui, B. / Ait Tahar, K. / Bouamra, Y.	Behavior of damaged concrete cylinders passively confined	163-170
Flores, Andreia / Marques, Arcelina / Machado, Joana / Marta, Miguel / Vaz, Mário	Bone Immobilization devices and consolidation mechanisms: Impact on healing time	34-39
Sieber, Lars / Stroetmann, Richard	The brittle fracture behaviour of old mild steels	1019-1026
Lepov, Valeriy / Grigoriev, Albert / Bisong, Mbelle Samuel / Lepova, Kyunna	Brittle Fracture Modeling for Steel Structures operated in the Extreme	777-784
Kepka, Miloslav	Calculations of fatigue life of a welded joint in the construction of the trolleybus rear axle	1409-1416
Raposo, P. C. / Martins, J. / Correia, J. A. F. O. / Salavessa, M. E. / Reis, C. / Xavier, J. M. C. / de Jesus, A. M. P.	Characterization of the Tensile Mechanical Behavior of Wooden Construction on Materials from Historic Building	1086-1091
Serov, Alexander	Cognitive Sensor Technology for Structural Health Monitoring	1160-1167
Okorokov, Volodymyr / Gorash, Yevgen	A comparative study between conventional and elevated temperature creep autofrettage	202-209
Saifi, A. / El-amiri, A. / Halloua, H. / Elhassnaoui, A. / Sahnoun, S. / Errami, Y. / Obbadi, A.	Comparison between a neural model and a thermographic model in estimating the thickness of scale in water pipes	1267-1274
Engin, Zafer / Coker, Demirkan	Comparison of Equivalent Stress Methods with Critical Plane Approaches for Multiaxial High Cycle Fatigue Assessment	1229-1236
Hashemi, Bahman / Maljaars, Johan / Leonetti, Davide / Snijder, H. H. (Bert)	Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint	959-966
Martin, Garan / Vladimír, Chmelko	Conditions for Long-term Monitoring of Safety in Operation of Pipelines	614-619
Barile, C. / Casavola, C. / Pappalettere, C.	Corrosion effects on mechanical properties of sintered stainless steels	195-201
Shardakov, Igor / Bykov, Anton / Shestakov, Aleksey / Glot, Irina	Crack control in concrete using shock wave techniques	210-216
Paolino, Davide S. / Tridello, Andrea / Chiandussi, Giorgio / Rossetto, Massimo	Crack growth from internal defects and related size-effect in VHCF	247-254
Judt, Paul / Zarges, Jan-Christoph / Ricoeur, Andreas / Heim, Hans-Peter	Crack path predictions in fiber reinforced composites	769-776
Machado, Joana / Almeida, Paulo / Fernandes, Sampaio / Marques, Arcelina / Vaz, Mário	Currently used systems of dental posts for endodontic treatment	27-33
Tsvetkov, R. / Shardakov, I. / Shestakov, A. / Gusev, G. / Epin, V.	Deformation monitoring of load-bearing reinforced concrete beams	620-626
Izumi, Yui / Uenishi, Koki / Mizokami, Yoshiaki / Moriyama, Akira / Sakagami, Takahide	Detection of back-surface crack based on temperature gap measurement	683-688
El-amiri, Asseya / Saifi, Abderrahim / Halloua, Hicham / Obbadi, Abdellatif / Errami, Youssef / Elhassnaoui, Ahmed / Sahnoun, Smail	Detection of corrosion depth in bolts by thermographic model	1065-1071
Maia, Lino / Neves, Diana	Developing a Commercial Self-Compacting Concrete Without Limestone Filler and With Volcanic Aggregate Materials	147-154
Tiwari, Kumar Anubhav / Raišutis, Renaldas / Mažeika, Liudas / Samaitis, Vykintas	Development of a 2D analytical model for the prediction of directivity pattern of transducers in the generation of guided wave modes	973-980
Barros, Francisco / Sousa, Pedro J. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	A DFT-based method for 3D digital image correlation	1260-1266
Eremin, A. / Panin, S. / Sunder, R. / Berto, F.	DIC Study of Fatigue Crack Growth after Single Overloads and Underloads	889-895
Sousa, Pedro J. / Barros, Francisco / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Displacement measurement and shape acquisition of an RC helicopter blade using Digital Image Correlation	1253-1259
Katunin, Andrzej	Domination of self-heating effect during fatigue of polymeric composites	93-98
Min, Xu / Santos, Luís Oliveira	Dynamic Assessment of the São João Bridge Structural Integrity	325-331
Ryjáček, Pavel / Polák, Michal / Plachy, Tomas / Kašpárek, Jiří	The dynamic behavior of the extremely skew railway bridge "Oskar"	1051-1056
Prato, C. A. / Pinto, F. / Ceballos, M. A. / Prato, A. M. / Gerbaudo, C. F.	Dynamic Tests for Assessment of Pedestrian Comfort for Design of a Stayed Highway Bridge	332-339
Capela, C. / Oliveira, S. E. / Pestana, J. / Ferreira, J. A. M.	Effect of fiber length on the mechanical properties of high dosage carbon reinforced	539-546
Tanabe, Hirotaka / Izumi, Yui / Takamatsu, Tohru / Nakamura, Yuki	Effect of Laser Power on Delamination Initiation Behaviour of CrAlN Coating on Steel Substrate Laser-Quenched after Coating Process under Rolling Contact Fatigue	1005-1010
Seitl, Stanislav / Miarka, Petr / Kala, Zdenek / Klusak, Jan	Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure	697-704
Farahani, Behzad V. / Belinha, Jorge / Tavares, Paulo J. / Moreira, P. M. G. P.	An Elasto-plastic Analysis of a DP600 Bi-Failure Specimen: Digital Image Correlation, Finite Element and Meshless Methods	1237-1244
Alena, Terekhina / Kostina, Anastasiia / Oleg, Plekhov / Luca, Susmel	Elasto-plastic TCD as a method of failure prediction	569-576
Lesiuk, G. / Szata, M. / Rozumek, D. / Marciniak, Z. / Correia, J. A. F. O. / de Jesus, A. M. P.	Energy description of fatigue crack growth process - theoretical and experimental approach	904-911
Ahmed, Amal ben / Nasr, Anouar / Bahloul, Ahmad / Fathallah, Raouf	An Engineering Predictive Approach of Kitagawa-Takahashi Diagrams of defective A356-T6 alloy considering SDAS dispersion	524-530
Tashkinov, Mikhail / Spaskova, Elena	Estimation of microstructural failure probability based on restoration of the field distributions laws in components of heterogenous media	608-613
Braz-César, M. / Ribeiro, J. / Lopes, H.	Estimation of the dynamic modal parameters of a small-scaled mockup	347-354
Tomaszewski, Tomasz / Strzelecki, Przemysław	Estimation of the impact stress gradient in the range of size effect	840-847
Kayamori, Yoichi / Kawabata, Tomoya	Evaluation of rotational deformation in compact specimens for CTOD fracture toughness testing	286-293
Naib, Sameera / De Waele, Wim / Štefane, Primož / Gubeljak, Nenad / Hertelé, Stijn	Evaluation of slip line theory assumptions for integrity assessnment of defected welds loaded in tension	1417-1424
Peral, L. B. / Zafra, A. / Rodríguez, C. / Belzunce, J.	Evaluation of strength and fracture toughness of ferritic high strength steels under hydrogen environments	1275-1282
Curà, Francesca / Mura, Andrea	Evaluation of the fretting wear damage on crowned splined couplings	1393-1400
Katunin, Andrzej / Wronkowicz, Angelika	Evolution of a fracture mechanism in a polymeric composite subjected to fatigue with the self-heating effect	416-421
Bär, Jürgen / Tiedemann, Dominic	Experimental investigation of short crack growth at notches in 7475-T761	793-800
Abd-Elhady, Amr A. / Sallam, Hossam El-Din M. / Mubaraki, Muhammad A.	Failure Analysis of Composite Repaired Pipelines with an Inclined Crack under Static Internal Pressure	123-130
Witek, Lucjan / Stachowicz, Feliks / Załęski, Arkadiusz	Failure investigation of the crankshaft of diesel engine	369-376
Dabiri, M. / Björk, T.	Fatigue analysis of notched specimens made of direct-quenched ultra-high-strength steel under constant amplitude loading	385-392
Kratochvilova, Vendula / Vlasic, Frantisek / Mazal, Pavel / Paloušek, David	Fatigue Behaviour Evaluation of Additively and Conventionally Produced Materials by Acoustic Emission Method	393-400
Homola, Petr / Kadlec, Martin / Růžek, Roman / Šedek, Jakub	Fatigue behaviour of tailored blank thermoplastic composites with internal ply-drops	1342-1348
Yang, Dong / Wang, Jinqi / Li, Dan / Kuang, K. S. C.	Fatigue crack monitoring using plastic optical fibre sensor	1168-1175
Boljanovic, Slobodanka / Maksimovic, Stevan	Fatigue damage analysis of wing-fuselage attachment lug	801-808
Curà, Francesca / Mura, Andrea / Adamo, Federica	Fatigue damage in spline couplings: numerical simulations and experimental validation	1326-1333
Krejsa, Martin / Seitl, Stanislav / Brozovsky, Jiri / Lehner, Petr	Fatigue damage prediction of short edge crack under various load: Direct Optimized Probabilistic Calculation	1283-1290
Eslami, Shayan / Tavares, Paulo J. / Moreira, P. M. G. P.	Fatigue Life Assessment of Friction Stir welded Dissimilar Polymers	1433-1438
Liu, Z. / Hebdon, M. H. / Correia, J. A. F. O. / Carvalho, H. / Vilela, P. / de Jesus, A. M. P. / Calçada, R. A. B.	Fatigue Life Evaluation of Critical Details of the Hercílio Luz Suspension Bridge	1027-1034
Lesiuk, G. / Zimniak, Z. / Wiśniewski, W. / Correia, J. A. F. O.	Fatigue lifetime improvement in AISI 304 stainless steel due to high-density electropulsing	928-934
Zhu, Shun-Peng / Liu, Qiang / Yu, Zheng-Yong / Liu, Yunhan	Fatigue reliability analysis of a turbine disc under multi-source uncertainties	967-972
Zerbst, U. / Madia, M. / Vormwald, M.	Fatigue strength and fracture mechanics	745-752
Vantadori, Sabrina / Boaretto, Joel / Fortese, Giovanni / Giordani, Felipe / Rodrigues, Roberto Isoppo / Iturrioz, Ignacio / Ronchei, Camilla / Scorza, Daniela / Zanichelli, Andrea	Fatigue strength of welded joints under multiaxial non-proportional loading	761-768
Raška, Jan	FE Mesh Generation – Automated Crack Grow Modeling with a View to Stress Intensity Factor Computing	225-232
Angulo, Ángela / Allwright, Jane / Mares, Cristinel / Gan, Tat-Hean / Soua, Slim	Finite Element Analysis of Crack Growth for Structural Health Monitoring of Mooring Chains using Ultrasonic Guided Waves and Acoustic Emission	217-224
Korkmaz, Yezdan M. / Coker, Demirkan	Finite element analysis of fretting contact for dissimilar and nonhomogeneous materials	452-459
Nazarko, Piotr / Ziemiański, Leonard	Force identification in bolts of flange connections for structural health monitoring and failure prevention	460-467
Kayamori, Yoichi / Kawabata, Tomoya / Hagihara, Yukito	Formulation of CTOD design curve considering the yield to tensile ratio	279-285
Pantazopoulos, George / Vazdirvanidis, Athanasios	Fracture analysis and embrittlement phenomena of machined brass components	476-483
Farahani, Behzad V. / Tavares, Paulo J. / Belinha, Jorge / Moreira, P. M. G. P.	A Fracture Mechanics Study of a Compact Tension Specimen: Digital Image Correlation, Finite Element and Meshless Methods	920-927
Bernardi, Patrizia / Michelini, Elena / Sirico, Alice / Vantadori, Sabrina / Zanichelli, Andrea	Fracture toughness of fibre-reinforced concrete determined by means of numerical analysis	848-855
Kujawski, Daniel / Teo, Joshua L. K.	A Generalization of Neuber's Rule for Numerical Applications	883-888
Cividini, Annamaria	Geomechanical characterization of some adobe materials	1072-1077
Farahani, Behzad V. / Amaral, Rui / Belinha, Jorge / Tavares, Paulo J. / Moreira, Pedro	A GTN Failure Analysis of an AA6061-T6 Bi-Failure Specimen	981-988
Małek, Ewelina / Miedzińska, Danuta / Stankiewicz, Michał	Heat resistance research and surface analysis of fireproof textiles with titanium silicide coating	508-515
Sniezek, Lucjan / Szachogluchowicz, Ireneusz / Wachowski, Marcin / Torzewski, Janusz / Mierzynski, Janusz	High cycle fatigue properties of explosively welded laminate AA2519/AA1050/Ti6Al4V	422-429
Toribio, Jesús	Hydrogen Effects on Progressively Cold-Drawn Pearlitic Steels: Between Donatello and Michelangelo	1446-1453
Iordachescu, Mihaela / de Abreu, Maricely / Valiente, Andrés	Hydrogen Induced Damage in Heavily Cold-Drawn Wires of Lean Duplex Stainless Steel	1304-1309
Toribio, Jesús / Kharin, Viktor	Hydrogen Transport to Fracture Sites in Metals and Alloys: Multiphysics Modelling	1291-1298
Boukert, B. / Benkhedda, A. / Bedia, E. A. Adda / Khodjet-Kesba, M.	Hygrothermomechanical Behavior of Thick Composite Plates Using High Order Theory	115-122
Okeke, C. P. / Thite, A. N. / Durodola, J. F. / Greenrod, M. T.	Hyperelastic polymer material models for robust fatigue performance of automotive LED lamps	600-607
Sarego, Giulia / Cappellini, Lorenzo / Zaccariotto, Mirco / Galvanetto, Ugo	Impact force reconstruction in composite panels	107-114
Mocian, Oana / Constantinescu, Dan Mihai / Sandu, Marin / Sorohan, Stefan	Impact response of polyurethane and polystyrene sandwich panels	653-658
Lesiuk, G. / Katkowski, M. / Duda, M. / Królicka, A. / Correia, J. A. F. O. / de Jesus, A. M. P. / Rabiega, J.	Improvement of the fatigue crack growth resistance in long term operated steel strengthened with CFRP patches	912-919
Zampieri, Paolo / Curtarello, Andrea / Maiorana, Emanuele / Pellegrino, Carlo / Rossi, Nicola De / Savio, Gianpaolo / Concheri, Gianmaria	Influence of corrosion morphology on the Fatigue strength of Bolted joints	409-415
Panin, S. V. / Vlasov, I. V. / Marushchak, P. O. / Eremin, A. V. / Byakov, A. V. / Berto, F. / Vinogradov, A.Yu. / Syromyatnikova, A. S. / Stankevich, R.	Influence of long-term operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel	401-408
Kõrgesaar, Mihkel / Romanoff, Jani / Remes, Heikki	Influence of material non-linearity on load carrying mechanism and strain path in stiffened panel	713-720
Lopes, H. / Araújo dos Santos, J. V. / Moreno-García, P. / Monteiro, J.	Influence of shearing amount and vibration amplitude on noise in shearography	1205-1212
Smaga, Marek / Skorupski, Robert / Mayer, Patrick / Kirsch, Benjamin / Aurich, Jan C. / Raid, Indek / Seewig, Jörg / Man, Jiří / Eifler, Dietmar / Beck, Tilmann	Influence of surface morphology on fatigue behavior of metastable austenitic stainless steel AISI 347 at ambient temperature and 300°C	989-996
Nunes, Pedro / Silva Lobo, Paulo	Influence of the SMA Constitutive Model on the Response of Structures	187-194
Panteleev, I. / Kostina, A. / Zhelnin, M. / Plekhov, A. / Levin, L.	Intellectual monitoring of artificial ground freezing in the fluid-saturated rock mass	492-499
Arslan, Barış / Kamas, Tuncay	Investigation of aggregate size effects on the compressive behavior of concrete by electromechanical and mechanical impedance spectroscopy	171-178
Prabowo, Aditya Rio / Baek, Seung Jun / Byeon, Jung Hoon / Bae, Dong Myung / Cho, Joung Hyung / Sohn, Jung Min	Investigation on the Structural Damage of a Double-Hull Ship, Part I – Ship Collision	935-942
Prabowo, Aditya Rio / Cho, Hyun Jin / Lee, Seung Geon / Bae, Dong Myung / Sohn, Jung Min / Cho, Joung Hyung	Investigation on the Structural Damage of a Double-Hull Ship, Part II – Grounding Impact	943-950
Hannemann, Robert / Köster, Paul / Sander, Manuela	Investigations on crack propagation in wheelset axles under rotating bending and mixed mode loading	861-868
Folgar, Ribadas H. / Böddeker, T. / Chergui, A. / Ivanjko, M. / Gili, F. / Behrens, S.	Joining TWIP-Steel Simulation Models	516-523
Forrest, Chad / Forrest, Clint / Wiser, Doug	Landing Gear Structural Health Monitoring (SHM)	1153-1159
Yalchiner, Fikri Bashar / Barsoum, Zuheir	Life Extension of Welded Structures Using HFMI Techniques - Potential Application to Offshore Structures	377-384
Urbanek, Ralf / Bär, Jürgen	Lock-In Thermographic Stress Analysis of notched and unnotched specimen under alternating loads	785-792
Lokaj, Antonín / Vavrusova, Kristyna	Longitudinal bonded joints of timber beams using plywood and LVL plates	1363-1369
Maia, Lino / Alves, Sérgio	Low durability of concrete elements due to steel corrosion – cases wherein the steel reinforcing bars acted as an internal clock bomb	139-146
Lu, Jin / Ventzke, Volker / Huber, Norbert / Nikolai Kashaev, and	Material Influence on Crenellation Effectiveness in Damage Tolerant Design	263-270
Pourhassan, Sahand / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Material properties of 2024-T3 ALCLAD and 2124-T851 aluminum alloys using 2D and 3D Digital Image Correlation techniques	1355-1362
El Amri, Abdelouahid / El Yakhloufi Haddou, Mounir / Khamlichi, Abdellatif	Measurement of Dynamic Fracture in Hot Forming Processing : Effect of Steel Elongation and Temperature	363-368
Bouamra, Y. / Ait Tahar, K.	Mechanical performance of a confined reinforced concrete beam	155-162
Constantinescu, Dan M. / Apostol, Dragos A. / Picu, Catalin R. / Krawczyk, Krzysztof / Sieberer, Manfred	Mechanical properties of epoxy nanocomposites reinforced with functionalized silica nanoparticles	647-652
Raposo, Patrícia C. / Correia, José A. F. O. / Sousa, Dinis / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Mechanical Properties of Wood Construction Materials from a Building from the 19th Century	1097-1101
Tashkinov, Mikhail / Matveenko, Valeriy	Method of assessment of mechanical characteristics of quasi-isotropic composite laminates using experimental data from fiber- optic strain sensors	577-583
Vladimír, Chmelko / Matúš, Margetin	The methodology of transformation of the nominal loading process into a root of notch	825-831
Bolzon, Gabriella / Rivolta, Barbara / Nykyforchyn, Hryhoriy / Zvirko, Olha	Micro and macro mechanical analysis of gas pipeline steels	627-632
Bonnaud, Etienne	Mitigation of weld residual deformations by weld sequence optimization: limitations and enhancements of surrogate models	310-317
Mubaraki, M. A. / Abd-Elhady, A. A. / Osman, S. A. / Sallam, H. E. M.	Mixed mode fracture behavior of concrete pavement containing RAP - 3D finite element analysis	19-26
Rozumek, D. / Marciniak, Z. / Lesiuk, G. / Correia, J. A. F. O.	Mixed mode I/II/III fatigue crack growth in S355 steel	896-903
Droubi, M. G. / Mcafee, J. / Horne, R. C. / Walker, S. / Klaassen, C. / Crawford, A. / Prathuru, A. K. / Faisal, N. H.	Mixed-mode fracture characteristics of metal-to-metal adhesively bonded joints: experimental and simulation methods	40-47
Biglar, Mojtaba / Stachowicz, Feliks / Trzepiecinski, Tomasz / Gromada, Magdalena	Modelling of Barium Titanate Microstructure Based on Both the Boundary Element Method and a Homogenization Technique	562-568
Mohamed, Khodjet-Kesba / Amina, Benkhedda / Bedia, Adda / billel, Boukert	Moisture absorption effect on the stress distribution of the cross-ply laminates with transverse matrix cracks	271-278
Halloua, H. / Elhassnaoui, A. / Saifi, A. / Elamiri, A. / Obbadi, A. / Errami, Y. / Sahnoun, S.	Neural networks and genetic algorithms for the evaluation of coatings thicknesses in thermal barriers by infrared thermography data	997-1004
Liu, Yunhan / Zhu, Shun-Peng / Yu, Zheng-Yong / Liu, Qiang	A new energy gradient-based model for LCF life prediction of turbine discs	856-860
Miedzińska, Danuta	New Method of Numerical Homogenization of Functionally Graded Materials	484-491
Raposo, Patrícia C. / Andrade, Michael / Correia, José A. F. O. / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Non-Destructive Structural Wood Diagnosis of a Medieval Building	1147-1152
Kostina, Anastasiia / Terekhina, Alena / Plekhov, Oleg	A Non-local Damage Model for Brittle Fracture in Metallic Structures with Stress Concentrators	302-309
Samadian, Kaveh / Hertelé, Stijn / De Waele, Wim	A novel flaw alignment approach based on the analysis of bands of maximum strain using full-field deformation measurements	1245-1252
Ben Fekih, Lassaad / Verlinden, Olivier / De Fruytier, Christophe / Kouroussis, Georges	Novel test prototype for the determination of mode I fracture parameters: application to adhesively bonded electronics	5-12
Zampieri, Paolo / Curtarello, Andrea / Maiorana, Emanuele / Pellegrino, Carlo	Numerical analyses of corroded bolted connections	592-599
Heimbs, Sebastian / Fischer, Ulrich / Theiler, Willy / Steenbergen, Frederik	Numerical Analysis of Bird Strike Resistance of Helicopter Searchlight	689-696
Seitl, Stanislav / Miarka, Petr / Sobek, Jakub / Klusak, Jan	A numerical investigation of the stress intensity factor for a bent chevron notched specimen: Comparison of 2D and 3D solutions	737-744
Brusa, Eugenio / Sesana, Raffaella / Ossola, Enrico	Numerical modeling and testing of mechanical behavior of AM Titanium alloy bracket for aerospace applications	753-760
Raposo, Patrícia C. / Andrade, Michael / Correia, José A. F. O. / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Numerical Modelling of a Wood Pavement of a 13th Century Building	1141-1146
Almeida, Diogo F. / Martins, Rui F. / Cardoso, João B.	Numerical simulation of residual stresses induced by TIG butt-welding of thin plates made of AISI 316L stainless steel	633-639
Paarmann, Maria / Mutschler, Patrick / Sander, Manuela	Numerical studies of the residual lifetime of power plant components based on experimental results at elevated temperatures	869-874
Araújo dos Santos, J. V. / Lopes, H. / Moreno-García, P.	Numerical study on damage identification using shearography with different shearing amounts	1198-1204
Eremeyev, Victor A. / Skrzat, Andrzej / Stachowicz, Feliks / Vinakurava, Anastasia	On strength analysis of highly porous materials within the framework of the micropolar elasticity	446-451
Farahani, Behzad V. / Belinha, Jorge / Tavares, Paulo J. / Moreira, P. M. G. P.	On the Non-linear Elasto-Plastic Behavior of AA6061-T6: Experimental and Numerical Implementations	468-475
Baptista, R. / Claudio, R. A. / Reis, L. / Madeira, J. F. A. / Freitas, M.	Optimal Cruciform Specimen Design Using the Direct Multi-search Method and Design Variable Influence Study	659-666
Santus, C. / Taylor, D. / Benedetti, M.	Optimal notched specimen parameters for accurate fatigue critical distance determination	817-824
Ribeiro, João Eduardo / César, Manuel Braz / Lopes, Hernâni	Optimization of machining parameters to improve the surface quality	355-362
Farahani, Behzad V. / Berardo, Jose / Belinha, Jorge / Ferreira, A. J. M. / Tavares, Paulo J. / Moreira, Pedro	An Optimized RBF Analysis of an Isotropic Mindlin Plate in Bending	584-591
Toribio, Jesús / Matos, Juan-Carlos / González, Beatriz	Paris Law-Based Approach to Fatigue Crack Growth in Notched Plates under Tension Loading	1299-1303
Raposo, Patrícia C. / Correia, José A. F. O. / Sousa, Dinis / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Pathological Inspection of Structural Masonry Walls of a Late-Romantic Historical Building	1102-1107
Raposo, P. C. / Correia, J. A. F. O. / Sousa, D. / Salavessa, M. E. / Reis, C. / Oliveira, C. / de Jesús, Abílio	Petrographic Characterization of Partition Wall Mortars of a 19th Century Building	1092-1096
Oliveira, Rosário	Plans of Control, Measurement and Monitoring with Risk Assessment Application to Rehabilitation works	1129-1135
Borrego, L. F. P. / Costa, J. D. / Ferreira, JA M.	Plasticity induced closure under variable amplitude loading in AlMgSi aluminum alloys	85-92
Alexandrescu, L. / Sonmez, M. / Georgescu, M. / NiŢuicĂ, M. / Ficai, A. / Trusca, R. / GurĂu, D. / Tudoroiu, L.	Polyamide/Polypropylene/graphene oxide nanocomposites with functional compatibilizers: Morpho-structural and physico-mechanical characterization	675-682
Alexandrescu, L. / Sonmez, M. / Georgescu, M. / NiŢuicĂ, M. / Ficai, A. / Trusca, R. / GurĂu, D.	Polymer nanocomposites PE/PE-g-MA/EPDM/nanoZnO and TiO2 dynamically crosslinked with sulphur and accelerators	667-674
Romano, F. / Mercurio, U.	Potentiality of SHM and PFA for a new design approach of low weight aircraft structures	721-728
Antunes, Vanessa / Candeias, António / Mirão, José / Carvalho, Maria L. / Serrão, Vitor / Dias, Cristina Barrocas / Manhita, Ana / Reis, Mónica Esteves / Manso, Marta	Preserving European paintings in Asian environment. The case of Goa Cathedral former altarpiece.	1078-1085
Bahloul, Ahmed / Ahmed, Amal ben / Bouraoui, Chokri	Probabilistic fatigue crack growth assessment of Al 7075-T6 aerospace component	430-437
Delprete, Cristiana / Sesana, Raffaella	Proposal of a stress-based isothermal LCF life model for Aluminium alloy cylinder heads	531-538
Andrade, Pedro / Santos, José / Maia, Lino	Reinforcement Measures to Reduce the Human Induced Vibrations on Stair Steps – A Case Study	1310-1317
Hammoum, H. / Bouzelha, K. / Imerzoukene, L. / Ouharoun, M.	Reliability analysis of Reno mattress for canals	69-76
Bouzelha, K. / Hammoum, H. / Amirouche, C. / Chaouadi, T.	Reliability analysis of stability to sliding of earthen embankment under seismic effect	77-84
Issam, Aalil / Kevin, Beck / Xavier, Brunetaud / Dalal, Badreddine / Khalid, Cherkaoui / Ali, Chaaba / Muzahim, Al-Mukhtar	Restoration mortars for the Volubilis calcarenite stone	1123-1128
Leander, John / Honfi, Dániel / Björnsson, Ivar	Risk-based planning of assessment actions for fatigue life prediction	1221-1228
Morais, J. / de Morais, P. Gil / Santos, C. / Campos Costa, A. / Candeias, P.	Shape Memory Alloy Based Dampers for Earthquake Response Mitigation	705-712
Tiwari, Kumar Anubhav / Raišutis, Renaldas / Samaitis, Vykintas	Signal processing methods to improve the Signal-to-noise ratio (SNR) in ultrasonic non-destructive testing of wind turbine blade	1184-1191
Correia, Ruben / Silva Lobo, Paulo	Simplified Assessment of the Effects of Columns Shortening on the Response of Tall Concrete Buildings	179-186
Tretyakov, M. P. / Wildemann, V. E.	Stable crack growth in composite laminates under various stiffness of the loading system	233-238
Cerveira, Adelaide / Correia, Elisete / Cristelo, Nuno / Miranda, Tiago / Castro, Fernando / Fernández-Jiménez, Ana	Statistical Analysis of the Influence of Several Factors on Compressive Strength of Alkali Activated Fly Ash	1116-1122
Toribio, Jesús	Stress Corrosion Cracking of Progressively Cold-Drawn Pearlitic Steels: From Tintoretto to Picasso	1439-1445
Matveenko, V. P. / Shardakov, I. N. / Kosheleva, N. A. / Fedorov, A.Yu.	Stress state analysis and optimization in the vicinity of the sensor of SMART-material	99-106
Kec, Jan / Černý, Ivo	Stress-strain assessment of dents in wall of high pressure gas pipeline	340-346
Raposo, Patrícia C. / Correia, José A. F. O. / Andrade, Michael / Salavessa, Maria E. / Reis, Cristina / Oliveira, Carlos / de Jesús, Abílio	Structural Characterization of 13th Century Building placed in Trás-os-Montes Region	1136-1140
Kyprianou, Andreas / Tjirkallis, Andreas	Structural damage detection of a cantilever beam under varying temperature using a collection of time series	1192-1197
Carvajal-Castrillón, Alejandro / Alvarez-Montoya, Joham / Niño-Navia, Juliana / Betancur-Agudelo, Leonardo / Amaya-Fernández, Ferney / Sierra-Pérez, Julián	Structural health monitoring on an unmanned aerial vehicle wing's beam based on fiber Bragg gratings and pattern recognition techniques	729-736
Soares, António / Martins, Rui F. / Mateus, António F. Rodrigues	Structural integrity analyses of two gas turbines exhaust systems used for naval propulsion	640-646
Díaz García, Manuel Ángel / González, Sergio Cicero / Ramos Gutiérrez, Óscar Ramón	Structural Integrity Evaluation of the "Constitución de 1812 bridge", over the Cádiz bay (Cádiz, Spain)	1334-1341
Radu, Dorin / Sedmak, Aleksandar / Bancila, Radu	Structural integrity of a wind loaded cylindrical steel shell structure	1213-1220
Prokhorov, A. / Petrova, A. / Plekhov, O.	The Study of Evolution of Physical and Mechanical Properties of Metals Under Very High Cycle Fatigue	555-561
Vshivkov, A. / Iziumova, A. / Plekhov, O.	The study of the fatigue crack propagation in mixed mode crack growth	438-445
Tretyakova, Tatyana / Wildemann, Valery	Study of the spatial-time inhomogeneity of inelastic deformation and failure in bodies with concentrators by using the digital image correlation and infrared analysis	318-324
Curà, Francesca / Sesana, Raffaella	Surface factor assessment in HCF for steels by means of empirical and non destructive techniques	500-507
Gallo, P. / Romanoff, J. / Frank, D. / Karttunen, A. / Remes, H.	Synthesis of experimental testing and fatigue behavior of laser stake-welded T-joints on medium-high cycle fatigue range	809-816
Monteiro, Mafalda / Brito, Vítor / Mendonça, Tiago	Tagus river centenarian steel bridges’ rehabilitation	48-54
Kang, Jidong / Rao, Harish M. / Sigler, David R. / Carlson, Blair E.	Tensile and Fatigue Behaviour of AA6022-T4 to IF Steel Resistance Spot Welds	1425-1432
Nagel, Sven / Knödel, Peter / Ummenhofer, Thomas	Testing of Ultra-Low Cycle Fatigue at Complex Loading Scenarios	1377-1384
Yang, Xia / Zhang, Jing / Ren, Wei-Xin	Threshold selection for extreme strain extrapolation due to vehicles on bridges	1176-1183
Václavík, Jaroslav / Chvojan, Jan	Torsion vibrations monitoring of turbine shafts	1349-1354
Hołowaty, J.	Toughness tests on steels from old railway bridges	1043-1050
Sakagami, Takahide / Mizokami, Yoshiaki / Shiozawa, Daiki / Izumi, Yui / Moriyama, Akira	TSA based evaluation of fatigue crack propagation in steel bridge members	1370-1376
Barsoum, Zuheir / Khurshid, Mansoor	Ultimate Strength Capacity of Welded Joints in High Strength Steels	1401-1408
Kim, Hyung-Kyu	Uncertainties of the critical buckling pressure of a tube	63-68
Scheel, Johannes / Ricoeur, Andreas	Weak and strong bi-material interfaces and their influence on propagating cracks in plane elastic structures	255-262
Hvizdoš, Pavol / Balko, Ján / Fides, Martin / Chicardi, Ernesto	Wear damage of TiTaCN-Co cermets at room and elevated temperatures	1385-1392
Sieber, Lars / Kilian, Andrè / Flederer, Holger / Göbel, Gunther / Steinhauser, Marco	Weldability of old mild steels in maintenance of historical steel structures	1011-1018

Informations
sur cette fiche
IssueID
60051
Publié(e) le:
04.12.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.