Materials and Structures - v. 54, n. 6 (November 2021)

Published:	November 2021

Articles in this Issue

Author(s)	Title	Page(s)
Rutzen, Matthias / Schulz, Michael / Moosburger-Will, Judith / Lauff, Philipp / Fischer, Oliver / Volkmer, Dirk	3D printing as an automated manufacturing method for a carbon fiber-reinforced cementitious composite with outstanding flexural strength (105 N/mm2)
Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Adjudging efficacy of geonet reinforcement on the seismic performance of brick masonry structures: an experimental study
Serafini, Ramoel / de la Fuente, Albert / de Figueiredo, Antonio D.	Assessment of the post-fire residual bearing capacity of FRC and hybrid RC-FRC tunnel sections considering thermal spalling
De Weerdt, Klaartje	Chloride binding in concrete: recent investigations and recognised knowledge gaps: RILEM Robert L’Hermite Medal Paper 2021
Sbartaï, Zoubir-Mehdi / Alwash, Maitham / Breysse, Denys / Romão, Xavier / Luprano, Vincenza A. M.	Combining the bi-objective approach and conditional coring for a reliable estimation of on-site concrete strength variability
Xin, Jianda / Liu, Yi / Zhang, Guoxin / Wang, Zhenhong / Yang, Ning / Qiao, Yu / Wang, Juan	Comparison of thermal cracking potential evaluation criteria for mass concrete structures
Ning, Zhiyuan / Liu, YunHe / Wang, Weibiao / Meng, Xiao / Dong, Jing	A damage bond model to investigate the damage and crack propagation for cemented materials and parametric analysis
Zeng, Zhe "Alan" / Zhang, Derun / Liu, Hanqi	Development of an energy-based framework to determine the surface free energy of asphalt binder: theoretical models
Li, Zhen / Wu, Bo	The direct shear behavior of recycled lump concrete
Esposito, Laura / Casagrande, Lorenzo / Menna, Costantino / Asprone, Domenico / Auricchio, Ferdinando	Early-age creep behaviour of 3D printable mortars: Experimental characterisation and analytical modelling
Birenboim, Matan / Alatawna, Amr / Sripada, Raghu / Nahum, Lior / Cullari, Lucas Luciano / Peled, Alva / Regev, Oren	Enhancement of fabric–mortar interfacial adhesion by particle decoration: insights from pull-off measurements
El Zein, Abdul Rahman / Vanhove, Yannick / Djelal, Chafika / Madec, Olivier / Gotteland, Philippe	Evaluation of internal bleeding in concrete foundation from the Terzaghi’s effective stress postulate
Saed, Seyed Ataollah / Kamboozia, Neda / Ziari, Hassan / Hofko, Bernhard	Experimental assessment and modeling of fracture and fatigue resistance of aged stone matrix asphalt (SMA) mixtures containing RAP materials and warm-mix additive using ANFIS method
Ma, Weili / Xu, Zengguang / Qin, Yuan / Cao, Cheng / Wang, Yixuan / Zhou, Heng	Experimental investigation of nonlinear flow characteristics in cracked polypropylene fibre-reinforced concrete
Diaz Caselles, Laura / Hot, Julie / Cassagnabère, Franck / Cyr, Martin	External sulfate attack: comparison of several alternative binders
Dan, Han-Cheng / Ling, Chongyu / Cao, Wei / Wang, Zelin / Liu, Jin	Fatigue behavior and phenomenological modeling of porous asphalt concrete under freeze–thaw cycling
Jiao, Dengwu / Lesage, Karel / Yardımcı, Mert Yücel / Shi, Caijun / De Schutter, Geert	Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field
Mrak, Maruša / Winnefeld, Frank / Lothenbach, Barbara / Dolenec, Sabina	The influence of calcium sulfate content on the hydration of belite-calcium sulfoaluminate cements with different clinker phase compositions
Farzanian, Khashayar / Vafaei, Babak / Ghahremaninezhad, Ali	The influence of the chemical composition of hydrogels on their behavior in cementitious materials
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	Influential factors for double-K fracture parameters analyzed by the round robin tests of RILEM TC265-TDK
Giroudon, Marie / Peyre Lavigne, Matthieu / Patapy, Cédric / Bertron, Alexandra	Laboratory assessment of the contribution of aggressive to concrete chemical compounds to the degradation of Portland cement-based materials during anaerobic digestion
Lee, Minu / Mata-Falcón, Jaime / Kaufmann, Walter	Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension
Castro-Borges, Pedro / Torres-Acosta, Andrés Antonio / Balancán-Zapata, Mercedes Guadalupe	Long term correlation between concrete cracking and corrosion in natural marine micro-environments
Liu, Dongyun / Tu, Yongming / Shi, Pan / Sas, Gabriel / Elfgren, Lennart	Mechanical and durability properties of concrete subjected to early-age freeze–thaw cycles
Kozlovcev, Petr / Válek, Jan	The micro-structural character of limestone and its influence on the formation of phases in calcined products: natural hydraulic limes and cements
Li, Long / Xuan, Dongxing / Chu, S. H. / Poon, Chi Sun	Modification of recycled aggregate by spraying colloidal nano silica and silica fume
Dalalbashi, Ali / Ghiassi, Bahman / Oliveira, Daniel V.	A multi-level investigation on the mechanical response of TRM-strengthened masonry
Meng, Shaoqiang / Ouyang, Xiaowei / Fu, Jiyang / Ma, Yuwei / Ye, Guang	New insights into the role of MWCNT in cement hydration
Mehdinia, Sina / Schumacher, Thomas / Song, Xubo / Wan, Eric	A pipeline for enhanced multimodal 2D imaging of concrete structures
Pi, Zhenyu / Xiao, Huigang / Liu, Rui / Liu, Min	Quantitative analysis of steel fiber-matrix ITZ and multi-scale enhancement mechanism of SFRC
Xie, Meijie / Dangla, Patrick / Li, Kefei	Reactive transport modelling of concrete subject to de-icing salts and atmospheric carbonation
Rønning, Terje F. / Wigum, Børge Johannes / Lindgård, Jan / Nixon, Philip / Sims, Ian	Recommendation of RILEM TC 258-AAA: RILEM AAR-0 outline guide to the use of RILEM methods in the assessment of the alkali-reactivity potential of concrete
Rønning, Terje F. / Wigum, Børge Johannes / Lindgård, Jan	Recommendation of RILEM TC 258-AAA: RILEM AAR-10: determination of binder combinations for non-reactive mix design using concrete prisms–38 °C test method
Borchers, Ingmar / Lindgård, Jan / Rønning, Terje F. / Wigum, Børge Johannes	Recommendation of RILEM TC 258-AAA: RILEM AAR-11: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method
Borchers, Ingmar	Recommendation of RILEM TC 258-AAA: RILEM AAR-12: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method with alkali supply
Yamada, K. / Kawabata, Y. / de Rooij, M. R. / Pedersen, B. M. / Brueckner, R. / Ideker, J. H.	Recommendation of RILEM TC 258-AAA: RILEM AAR-13: application of alkali-wrapping for concrete prism testing to assess the expansion potential of alkali-silica reaction
Menéndez, Esperanza / Silva, António Santos / Duchesne, Josée	Recommendation of RILEM TC 258-AAA: RILEM AAR-8: determination of potential releasable alkalis by aggregates in concrete
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	Results of round-robin testing for determining the double-K fracture parameters for crack propagation in concrete: technical report of the RILEM TC265-TDK
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK
Vivas, Juan Carlos / Zerbino, Raul / Torrijos, María Celeste / Giaccio, Graciela	A test procedure for evaluating the impact behaviour of fibre reinforced concrete
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK
Samouh, Hamza / Ishikawa, Shunsuke / Kontani, Osamu / Murakami, Kenta / Nishimoto, Shoji / Suzuki, Kiyoteru / Maruyama, Ippei	Thermomechanical behavior of granite under 150 °C: experimental and numerical analysis

About this
data sheet
IssueID
59961
Published on:
30/11/2021
Last updated on:
30/11/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Materials and Structures - v. 54, n. 6 (November 2021)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 54, n. 6 (November 2021)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.