Materials and Structures - v. 54, n. 6 (novembre 2021)

Publié:	novembre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rutzen, Matthias / Schulz, Michael / Moosburger-Will, Judith / Lauff, Philipp / Fischer, Oliver / Volkmer, Dirk	3D printing as an automated manufacturing method for a carbon fiber-reinforced cementitious composite with outstanding flexural strength (105 N/mm2)
Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Adjudging efficacy of geonet reinforcement on the seismic performance of brick masonry structures: an experimental study
Serafini, Ramoel / de la Fuente, Albert / de Figueiredo, Antonio D.	Assessment of the post-fire residual bearing capacity of FRC and hybrid RC-FRC tunnel sections considering thermal spalling
De Weerdt, Klaartje	Chloride binding in concrete: recent investigations and recognised knowledge gaps: RILEM Robert L’Hermite Medal Paper 2021
Sbartaï, Zoubir-Mehdi / Alwash, Maitham / Breysse, Denys / Romão, Xavier / Luprano, Vincenza A. M.	Combining the bi-objective approach and conditional coring for a reliable estimation of on-site concrete strength variability
Xin, Jianda / Liu, Yi / Zhang, Guoxin / Wang, Zhenhong / Yang, Ning / Qiao, Yu / Wang, Juan	Comparison of thermal cracking potential evaluation criteria for mass concrete structures
Ning, Zhiyuan / Liu, YunHe / Wang, Weibiao / Meng, Xiao / Dong, Jing	A damage bond model to investigate the damage and crack propagation for cemented materials and parametric analysis
Zeng, Zhe "Alan" / Zhang, Derun / Liu, Hanqi	Development of an energy-based framework to determine the surface free energy of asphalt binder: theoretical models
Li, Zhen / Wu, Bo	The direct shear behavior of recycled lump concrete
Esposito, Laura / Casagrande, Lorenzo / Menna, Costantino / Asprone, Domenico / Auricchio, Ferdinando	Early-age creep behaviour of 3D printable mortars: Experimental characterisation and analytical modelling
Birenboim, Matan / Alatawna, Amr / Sripada, Raghu / Nahum, Lior / Cullari, Lucas Luciano / Peled, Alva / Regev, Oren	Enhancement of fabric–mortar interfacial adhesion by particle decoration: insights from pull-off measurements
El Zein, Abdul Rahman / Vanhove, Yannick / Djelal, Chafika / Madec, Olivier / Gotteland, Philippe	Evaluation of internal bleeding in concrete foundation from the Terzaghi’s effective stress postulate
Saed, Seyed Ataollah / Kamboozia, Neda / Ziari, Hassan / Hofko, Bernhard	Experimental assessment and modeling of fracture and fatigue resistance of aged stone matrix asphalt (SMA) mixtures containing RAP materials and warm-mix additive using ANFIS method
Ma, Weili / Xu, Zengguang / Qin, Yuan / Cao, Cheng / Wang, Yixuan / Zhou, Heng	Experimental investigation of nonlinear flow characteristics in cracked polypropylene fibre-reinforced concrete
Diaz Caselles, Laura / Hot, Julie / Cassagnabère, Franck / Cyr, Martin	External sulfate attack: comparison of several alternative binders
Dan, Han-Cheng / Ling, Chongyu / Cao, Wei / Wang, Zelin / Liu, Jin	Fatigue behavior and phenomenological modeling of porous asphalt concrete under freeze–thaw cycling
Jiao, Dengwu / Lesage, Karel / Yardımcı, Mert Yücel / Shi, Caijun / De Schutter, Geert	Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field
Mrak, Maruša / Winnefeld, Frank / Lothenbach, Barbara / Dolenec, Sabina	The influence of calcium sulfate content on the hydration of belite-calcium sulfoaluminate cements with different clinker phase compositions
Farzanian, Khashayar / Vafaei, Babak / Ghahremaninezhad, Ali	The influence of the chemical composition of hydrogels on their behavior in cementitious materials
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	Influential factors for double-K fracture parameters analyzed by the round robin tests of RILEM TC265-TDK
Giroudon, Marie / Peyre Lavigne, Matthieu / Patapy, Cédric / Bertron, Alexandra	Laboratory assessment of the contribution of aggressive to concrete chemical compounds to the degradation of Portland cement-based materials during anaerobic digestion
Lee, Minu / Mata-Falcón, Jaime / Kaufmann, Walter	Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension
Castro-Borges, Pedro / Torres-Acosta, Andrés Antonio / Balancán-Zapata, Mercedes Guadalupe	Long term correlation between concrete cracking and corrosion in natural marine micro-environments
Liu, Dongyun / Tu, Yongming / Shi, Pan / Sas, Gabriel / Elfgren, Lennart	Mechanical and durability properties of concrete subjected to early-age freeze–thaw cycles
Kozlovcev, Petr / Válek, Jan	The micro-structural character of limestone and its influence on the formation of phases in calcined products: natural hydraulic limes and cements
Li, Long / Xuan, Dongxing / Chu, S. H. / Poon, Chi Sun	Modification of recycled aggregate by spraying colloidal nano silica and silica fume
Dalalbashi, Ali / Ghiassi, Bahman / Oliveira, Daniel V.	A multi-level investigation on the mechanical response of TRM-strengthened masonry
Meng, Shaoqiang / Ouyang, Xiaowei / Fu, Jiyang / Ma, Yuwei / Ye, Guang	New insights into the role of MWCNT in cement hydration
Mehdinia, Sina / Schumacher, Thomas / Song, Xubo / Wan, Eric	A pipeline for enhanced multimodal 2D imaging of concrete structures
Pi, Zhenyu / Xiao, Huigang / Liu, Rui / Liu, Min	Quantitative analysis of steel fiber-matrix ITZ and multi-scale enhancement mechanism of SFRC
Xie, Meijie / Dangla, Patrick / Li, Kefei	Reactive transport modelling of concrete subject to de-icing salts and atmospheric carbonation
Rønning, Terje F. / Wigum, Børge Johannes / Lindgård, Jan / Nixon, Philip / Sims, Ian	Recommendation of RILEM TC 258-AAA: RILEM AAR-0 outline guide to the use of RILEM methods in the assessment of the alkali-reactivity potential of concrete
Rønning, Terje F. / Wigum, Børge Johannes / Lindgård, Jan	Recommendation of RILEM TC 258-AAA: RILEM AAR-10: determination of binder combinations for non-reactive mix design using concrete prisms–38 °C test method
Borchers, Ingmar / Lindgård, Jan / Rønning, Terje F. / Wigum, Børge Johannes	Recommendation of RILEM TC 258-AAA: RILEM AAR-11: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method
Borchers, Ingmar	Recommendation of RILEM TC 258-AAA: RILEM AAR-12: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method with alkali supply
Yamada, K. / Kawabata, Y. / de Rooij, M. R. / Pedersen, B. M. / Brueckner, R. / Ideker, J. H.	Recommendation of RILEM TC 258-AAA: RILEM AAR-13: application of alkali-wrapping for concrete prism testing to assess the expansion potential of alkali-silica reaction
Menéndez, Esperanza / Silva, António Santos / Duchesne, Josée	Recommendation of RILEM TC 258-AAA: RILEM AAR-8: determination of potential releasable alkalis by aggregates in concrete
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	Results of round-robin testing for determining the double-K fracture parameters for crack propagation in concrete: technical report of the RILEM TC265-TDK
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, recommendation of RILEM TC265-TDK
Vivas, Juan Carlos / Zerbino, Raul / Torrijos, María Celeste / Giaccio, Graciela	A test procedure for evaluating the impact behaviour of fibre reinforced concrete
Xu, Shilang / Li, Qinghua / Wu, Yao / Dong, Lixin / Lyu, Yao / Reinhardt, Hans W. / Leung, Christopher K. Y. / Ruiz, Gonzalo / Kumar, Shailendra / Hu, Shaowei	The theoretical basis of testing methods to determine double-K criterion for crack propagation in concrete: technical report of the RILEM TC265-TDK
Samouh, Hamza / Ishikawa, Shunsuke / Kontani, Osamu / Murakami, Kenta / Nishimoto, Shoji / Suzuki, Kiyoteru / Maruyama, Ippei	Thermomechanical behavior of granite under 150 °C: experimental and numerical analysis

Informations
sur cette fiche
IssueID
59961
Publié(e) le:
30.11.2021
Modifié(e) le:
30.11.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 54, n. 6 (novembre 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 54, n. 6 (novembre 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.