Materials and Structures - v. 54, n. 2 (February 2021)

Published:	February 2021

Articles in this Issue

Author(s)	Title	Page(s)
Liu, Hanqi / Zeiada, Waleed / Al-Khateeb, Ghazi G. / Ezzet, Helal / Shanableh, Abdallah / Samarai, Mufid	Analysis of MSCR test results for asphalt binders with improved accuracy
Dorn, Tobias / Hirsch, Tamino / Stephan, Dietmar	Analyzing the early structural build-up of accelerated cement pastes
Zhang, Xiaowen / Zhao, Yuxi / Bernal, Susan A.	Applicability discussion for multi-peak Gaussian model of corrosion layer at steel/concrete interfaces
Mechtcherine, Viktor / Wyrzykowski, Mateusz / Schröfl, Christof / Snoeck, Didier / Lura, Pietro / De Belie, Nele / Mignon, Arn / Van Vlierberghe, Sandra / Klemm, Agnieszka J. / Almeida, Fernando C. R. / Tenório Filho, José Roberto / Boshoff, William Peter / Reinhardt, Hans-Wolf / Igarashi, Shin-Ichi	Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report
Monkman, Sean / MacDonald, Mark / Sutter, Larry	Beneficiation of concrete wash water with carbon dioxide
Zhang, Fuwen / Dai, Jian-Guo / Wang, Zhuolin / Wang, Mingqian / Leng, Yubing / Xu, Qingfeng	Bond durability of epoxy and cement- bonded CFRP reinforcement to concrete interfaces subject to water immersion
Brencich, A. / Hasweh, F. / Pera, D.	Calibration of Pull-Out tests on Historical-like Concrete
Le, Tien-Thinh / Le, Minh Vuong	Development of user-friendly kernel-based Gaussian process regression model for prediction of load-bearing capacity of square concrete-filled steel tubular members
Pang, Xiaofan / Kong, Xiangming / Liu, Xiaoyong / Hao, Tingyu	The dispersing performances of polycarboxylate superplasticizer in cement pastes prepared with deionized water and seawater
Sakoparnig, Marlene / Galan, Isabel / Steindl, Florian R. / Kusterle, Wolfgang / Juhart, Joachim / Grengg, Cyrill / Briendl, Lukas / Saxer, Andreas / Thumann, Maria / Mittermayr, Florian	Durability of clinker reduced shotcrete: Ca2+ leaching, sintering, carbonation and chloride penetration
Malakopoulos, Athanasios / Chatzigeorgiou, Manolis / Boukos, Nikos / Salifoglou, Athanasios	Durability performance of Portland limestone cement mortar containing butyl and zinc stearate admixtures
Bueno, Verónica / Nakarai, Kenichiro / Nguyen, May Huu / Torrent, Roberto Juan / Ujike, Isao	Effect of surface moisture on air-permeability kT and its correction
Wally, Gustavo Bosel / Magalhães, Fábio Costa / Sell Junior, Félix Krolow / Teixeira, Fernando Ritiéle / de Vasconcellos Real, Mauro	Estimating service life of reinforced concrete structures with binders containing silica fume and metakaolin under chloride environment: durability indicators and probabilistic assessment
Gao, Xiao-Long / Wang, Jun-Yan	Experimental and numerical study on the tensile behaviours of wet joints in steel-UHPC composite decks using a novel tensile test setup
Baktheer, Abedulgader / Chudoba, Rostislav	Experimental and theoretical evidence for the load sequence effect in the compressive fatigue behavior of concrete
Wang, Tianling / Xu, Gang / Gong, Minghui / Yang, Jun / Li, Sitong / Cai, Degou	Full range temperature susceptibility of aged bitumen rejuvenated by polymer modified bio-derived rejuvenator
Omoding, Nicholas / Cunningham, Lee S. / Lane-Serff, Gregory F.	Influence of basalt micro-fibres on the abrasion resistance of concrete in hydraulic structures
Huang, Jiandong / Wang, Qi-Ang	Influence of crumb rubber particle sizes on rutting, low temperature cracking, fracture, and bond strength properties of asphalt binder
Rutzen, Matthias / Lauff, Philipp / Niedermeier, Roland / Fischer, Oliver / Raith, Manuel / Grosse, Christian U. / Weiss, Ursula / Peter, Malte A. / Volkmer, Dirk	Influence of fiber alignment on pseudoductility and microcracking in a cementitious carbon fiber composite material
Roja, K. Lakshmi / Rehman, Amara / Ouederni, Mabrouk / Krishnamoorthy, Senthil Kumar / Abdala, Ahmed / Masad, Eyad	Influence of polymer structure and amount on microstructure and properties of polyethylene-modified asphalt binders
Liu, Quan / Wang, Chonghui / Zhang, Zeyu / Du, Cong / Liu, Pengfei / Oeser, Markus	Influence of preparation methods on the performance of cold-mixed epoxy bitumen
Zahabizadeh, Behzad / Pereira, João / Gonçalves, Cláudia / Pereira, Eduardo N. B. / Cunha, Vítor M. C. F.	Influence of the printing direction and age on the mechanical properties of 3D printed concrete
Bouarroudj, Mohamed ElKarim / Remond, Sébastien / Grellier, Adèle / Bulteel, David / Michel, Frédéric / Zhao, Zengfeng / Courard, Luc	Intra granular porosity of mineral powders: modeling and experimentation
Chang, Wei / Zheng, Wenzhong	Lateral response of HPC confined by both spiral stirrups and CFRP under axial compression
Luan, Yao / Ishida, Tetsuya	A multi-scale approach for simulation of capillary absorption of cracked SHCC based on crack pattern and water status in micropores
Shabdin, M. / Zargaran, M. / Attari, Nader K. A.	New formulation for predicting diagonal tension capacity of masonry brick walls strengthened with textile reinforced mortar (TRM)
Ruan, Li / Luo, Rong / Zhang, Derun / Wang, Biao	Numerical simulation of crack paths in asphalt mixture using ordinary state-based peridynamics
Rabahi-Touloum, Naïma / Brara, Ahmed	The occurrence of thaumasite in newly built concrete constructions under the semi-arid climate of Northeastern Algeria
Li, Xue / Gao, Zhuo / Zhou, Yingwu / Sui, Lili / Chen, Cheng	Optimizing natural fiber reinforced polymer strengthening of RC beams
Li, Ning / Zhan, He / Yu, Xin / Tang, Wei / Yu, Hao / Dong, Fuqiang	Research on the high temperature performance of asphalt pavement based on field cores with different rutting development levels
Alvarez, J. I. / Veiga, R. / Martinez-Ramirez, S. / Secco, M. / Faria, P. / Maravelaki, P. N. / Ramesh, M. / Papayianni, I. / Válek, J.	RILEM TC 277-LHS report: a review on the mechanisms of setting and hardening of lime-based binding systems
Esaker, Mohamed / Hamza, Omar / Souid, Adam / Elliott, David	Self-healing of bio-cementitious mortar incubated within neutral and acidic soil
Zhang, Zhanming / Cheng, Peifeng / Yang, Zonghao / Xu, Jin / Li, Yiming	Self-healing properties of nano-montmorillonite-enhanced asphalt binders from the perspective of energetics and morphology
Al-Fakher, Usama / Manalo, Allan / Ferdous, Wahid / Alajarmeh, Omar / Aravinthan, Thiru / Zhuge, Yan / Bai, Yu / Edoo, Azam	Shear behaviour of hollow precast concrete-composite structures
Fjendbo, Simon / Sørensen, Henrik E. / De Weerdt, Klaartje / Geiker, Mette R.	The square root method for chloride ingress prediction—Applicability and limitations
Sri Bhanupratap Rathod, R. / Venkatarama Reddy, B. V.	Strength and stress–strain characteristics of fibre reinforced cement stabilised rammed earth
Ducasse-Lapeyrusse, Jean / Vergès-Belmin, Véronique	Traditional gypsum renders in the Paris area: focus on a particular typology

About this
data sheet
IssueID
56995
Published on:
02/03/2021
Last updated on:
02/03/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Materials and Structures - v. 54, n. 2 (February 2021)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Materials and Structures - v. 54, n. 2 (February 2021)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.