Materials and Structures - v. 54, n. 2 (février 2021)

Publié:	février 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Liu, Hanqi / Zeiada, Waleed / Al-Khateeb, Ghazi G. / Ezzet, Helal / Shanableh, Abdallah / Samarai, Mufid	Analysis of MSCR test results for asphalt binders with improved accuracy
Dorn, Tobias / Hirsch, Tamino / Stephan, Dietmar	Analyzing the early structural build-up of accelerated cement pastes
Zhang, Xiaowen / Zhao, Yuxi / Bernal, Susan A.	Applicability discussion for multi-peak Gaussian model of corrosion layer at steel/concrete interfaces
Mechtcherine, Viktor / Wyrzykowski, Mateusz / Schröfl, Christof / Snoeck, Didier / Lura, Pietro / De Belie, Nele / Mignon, Arn / Van Vlierberghe, Sandra / Klemm, Agnieszka J. / Almeida, Fernando C. R. / Tenório Filho, José Roberto / Boshoff, William Peter / Reinhardt, Hans-Wolf / Igarashi, Shin-Ichi	Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report
Monkman, Sean / MacDonald, Mark / Sutter, Larry	Beneficiation of concrete wash water with carbon dioxide
Zhang, Fuwen / Dai, Jian-Guo / Wang, Zhuolin / Wang, Mingqian / Leng, Yubing / Xu, Qingfeng	Bond durability of epoxy and cement- bonded CFRP reinforcement to concrete interfaces subject to water immersion
Brencich, A. / Hasweh, F. / Pera, D.	Calibration of Pull-Out tests on Historical-like Concrete
Le, Tien-Thinh / Le, Minh Vuong	Development of user-friendly kernel-based Gaussian process regression model for prediction of load-bearing capacity of square concrete-filled steel tubular members
Pang, Xiaofan / Kong, Xiangming / Liu, Xiaoyong / Hao, Tingyu	The dispersing performances of polycarboxylate superplasticizer in cement pastes prepared with deionized water and seawater
Sakoparnig, Marlene / Galan, Isabel / Steindl, Florian R. / Kusterle, Wolfgang / Juhart, Joachim / Grengg, Cyrill / Briendl, Lukas / Saxer, Andreas / Thumann, Maria / Mittermayr, Florian	Durability of clinker reduced shotcrete: Ca2+ leaching, sintering, carbonation and chloride penetration
Malakopoulos, Athanasios / Chatzigeorgiou, Manolis / Boukos, Nikos / Salifoglou, Athanasios	Durability performance of Portland limestone cement mortar containing butyl and zinc stearate admixtures
Bueno, Verónica / Nakarai, Kenichiro / Nguyen, May Huu / Torrent, Roberto Juan / Ujike, Isao	Effect of surface moisture on air-permeability kT and its correction
Wally, Gustavo Bosel / Magalhães, Fábio Costa / Sell Junior, Félix Krolow / Teixeira, Fernando Ritiéle / de Vasconcellos Real, Mauro	Estimating service life of reinforced concrete structures with binders containing silica fume and metakaolin under chloride environment: durability indicators and probabilistic assessment
Gao, Xiao-Long / Wang, Jun-Yan	Experimental and numerical study on the tensile behaviours of wet joints in steel-UHPC composite decks using a novel tensile test setup
Baktheer, Abedulgader / Chudoba, Rostislav	Experimental and theoretical evidence for the load sequence effect in the compressive fatigue behavior of concrete
Wang, Tianling / Xu, Gang / Gong, Minghui / Yang, Jun / Li, Sitong / Cai, Degou	Full range temperature susceptibility of aged bitumen rejuvenated by polymer modified bio-derived rejuvenator
Omoding, Nicholas / Cunningham, Lee S. / Lane-Serff, Gregory F.	Influence of basalt micro-fibres on the abrasion resistance of concrete in hydraulic structures
Huang, Jiandong / Wang, Qi-Ang	Influence of crumb rubber particle sizes on rutting, low temperature cracking, fracture, and bond strength properties of asphalt binder
Rutzen, Matthias / Lauff, Philipp / Niedermeier, Roland / Fischer, Oliver / Raith, Manuel / Grosse, Christian U. / Weiss, Ursula / Peter, Malte A. / Volkmer, Dirk	Influence of fiber alignment on pseudoductility and microcracking in a cementitious carbon fiber composite material
Roja, K. Lakshmi / Rehman, Amara / Ouederni, Mabrouk / Krishnamoorthy, Senthil Kumar / Abdala, Ahmed / Masad, Eyad	Influence of polymer structure and amount on microstructure and properties of polyethylene-modified asphalt binders
Liu, Quan / Wang, Chonghui / Zhang, Zeyu / Du, Cong / Liu, Pengfei / Oeser, Markus	Influence of preparation methods on the performance of cold-mixed epoxy bitumen
Zahabizadeh, Behzad / Pereira, João / Gonçalves, Cláudia / Pereira, Eduardo N. B. / Cunha, Vítor M. C. F.	Influence of the printing direction and age on the mechanical properties of 3D printed concrete
Bouarroudj, Mohamed ElKarim / Remond, Sébastien / Grellier, Adèle / Bulteel, David / Michel, Frédéric / Zhao, Zengfeng / Courard, Luc	Intra granular porosity of mineral powders: modeling and experimentation
Chang, Wei / Zheng, Wenzhong	Lateral response of HPC confined by both spiral stirrups and CFRP under axial compression
Luan, Yao / Ishida, Tetsuya	A multi-scale approach for simulation of capillary absorption of cracked SHCC based on crack pattern and water status in micropores
Shabdin, M. / Zargaran, M. / Attari, Nader K. A.	New formulation for predicting diagonal tension capacity of masonry brick walls strengthened with textile reinforced mortar (TRM)
Ruan, Li / Luo, Rong / Zhang, Derun / Wang, Biao	Numerical simulation of crack paths in asphalt mixture using ordinary state-based peridynamics
Rabahi-Touloum, Naïma / Brara, Ahmed	The occurrence of thaumasite in newly built concrete constructions under the semi-arid climate of Northeastern Algeria
Li, Xue / Gao, Zhuo / Zhou, Yingwu / Sui, Lili / Chen, Cheng	Optimizing natural fiber reinforced polymer strengthening of RC beams
Li, Ning / Zhan, He / Yu, Xin / Tang, Wei / Yu, Hao / Dong, Fuqiang	Research on the high temperature performance of asphalt pavement based on field cores with different rutting development levels
Alvarez, J. I. / Veiga, R. / Martinez-Ramirez, S. / Secco, M. / Faria, P. / Maravelaki, P. N. / Ramesh, M. / Papayianni, I. / Válek, J.	RILEM TC 277-LHS report: a review on the mechanisms of setting and hardening of lime-based binding systems
Esaker, Mohamed / Hamza, Omar / Souid, Adam / Elliott, David	Self-healing of bio-cementitious mortar incubated within neutral and acidic soil
Zhang, Zhanming / Cheng, Peifeng / Yang, Zonghao / Xu, Jin / Li, Yiming	Self-healing properties of nano-montmorillonite-enhanced asphalt binders from the perspective of energetics and morphology
Al-Fakher, Usama / Manalo, Allan / Ferdous, Wahid / Alajarmeh, Omar / Aravinthan, Thiru / Zhuge, Yan / Bai, Yu / Edoo, Azam	Shear behaviour of hollow precast concrete-composite structures
Fjendbo, Simon / Sørensen, Henrik E. / De Weerdt, Klaartje / Geiker, Mette R.	The square root method for chloride ingress prediction—Applicability and limitations
Sri Bhanupratap Rathod, R. / Venkatarama Reddy, B. V.	Strength and stress–strain characteristics of fibre reinforced cement stabilised rammed earth
Ducasse-Lapeyrusse, Jean / Vergès-Belmin, Véronique	Traditional gypsum renders in the Paris area: focus on a particular typology

Informations
sur cette fiche
IssueID
56995
Publié(e) le:
02.03.2021
Modifié(e) le:
02.03.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 54, n. 2 (février 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 54, n. 2 (février 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.