IOP Conference Series: Materials Science and Engineering - February 2020

Published:	February 2020

Articles in this Issue

Author(s)	Title	Page(s)
Hsu, Shih-Tsung / Chen, Xiang-Yang / Wang, Yi-Fan	A 3-D Analysis on the Loading Behaviours of an Under-reamed Anchor in Cohesion-less Soils	012048
Castro, M. / Navarro, J. / Aybar, G. / Durán, G.	Analysis of high plasticity clayey soil improvement at subgrade level through Portland cement added to decrease volumetric change	012040
Shiling, Zhang	Analysis of Insulation Structure Design for High Altitude UHV Reactor Bushing	012013
Qiaodan, Ye / Junjie, Wang / Changjiang, Wang	Application and Development of the Super-large Diameter Column Foundation of Bridge	012021
Zhang, Huifeng / Bai, Xue	Axial compression capacity calculation of slenderness CFST filled with DCLs	012023
Wang, Huanyou / Jin, Gui / Tan, Qiaolai	Characteristic enhancement of InGaN-based light emitting diodes grown on pattern sapphire substrates	012087
Fei, Shuai / Zhihao, Ge / Yifei, Tong / Xiangdong, Li	Characteristics analyses of energy consumption for bridge crane based on the energy flow	012002
Marron, J. / Quispe, G. / Raymundo-Ibañez, C. / Perez, Moises	Clamp bending machine and annealed wire cutter for reinforced concrete columns	012020
Maslenikov, I. / Useinov, A.	Combined opto-mechanical measurements with the transparent indenter’s tip	012056
Tiefeng, Zhang / Yifei, Tong / Yuanhao, Zhang / Xu, Zhang	Comprehensive Planning of New Plant Under Industry 4.0	012077
Torres, V. / Chirinos, K. / Cuervo, C.	Control of fissures generated by the retraction in rigid pavements, applying synthetic fibers of recycled polypropylene.	012049
Shu, Shengrong / Zhang, Yu / Xiao, Caiwei / Qi, Xiaoning / Liu, Leping	Cooling performance improvement of circulating internal cooling turning tool by built-in additional spray cooling nozzle	012062
Cano, B. / Galarza, J. / Rodríguez, J. / García, F.	Cracking Control in Mezzanine Floor Slabs using Rice Husk Ash and Polypropylene Fibers	012065
Jian-feng, Gu / kai-jun, Zhou	Design and Analysis of Rotor Line Type for Three-lobe Roots Blower	012001
Li, Xianzhang / Yang, Lianfa / Jiang, Jingyu / Huang, Jinjie	Determination of expansion pressure of heat exchange based on three material models	012010
Liang, Dong / Mi, Xujun / Peng, Lijun / Xie, Haofeng / Huang, Guojie / Yang, Zhen	Dynamics of phase transformation of Cu-Cr-Zr-Ag Alloy	012022
Salguero, C. / Castañeda, L. / Rodríguez, J. / Carrera, E.	Eco-Concrete for Hydraulic Structures with Addition of Colloidal Nano-Silica	012044
Yan, Shuaishuai / Zhang, Ming	Effect of early strength agents on specified density concrete	012071
Baral, Kedar / Cheng, Bin / Xiang, Sheng / Sharma, Suraksha	Effect of End-to-End Connectors in Elastic GFRP Gridshell	012051
Dongdong, YAO / Hongru, Ji / Zhe, Lu / Xinjun, LI / Jie, Li / Zhengang, FENG	Effect of Quartz Sand on Compressive Strength of High Performance Basalt Fiber Concrete	012063
Saleem, Adil / Zhang, Yujun / Gong, Hongyu / Majeed, Muhammad K. / Lin, Xiao / Zeeshan Ashfaq, M. / Xinfeng, Zhang	Effect of SiC on the dielectric and microwave absorption performance of F-doped Si3N4 ceramics in X-band	012005
Zhang, Ming / Wang, Wuxiang	Effect of superplasticizer in anti-washout admixture on paste	012070
Shah, Bikram / Xu, Feng	Effects of Steel Bracings in the Progressive Collapse Resistance of Reinforced Concrete Building	012092
Belizario-Calsin, M. / Condori-Cardenas, R. / Pehovaz-Alvarez, H. / Raymundo-Ibañez, C. / Perez, Moises	Empirical and Numerical Finite-Element-Based Model to Improve Narrow Vein Mine Design in Peruvian Mining	012014
Pichardo, C. / Tovar, W. / Fernandez-Davila, V. I.	Evaluation of the curvature ductility ratio of a circular cross-section of concrete reinforced with GFRP bars	012009
Davila, C. / Vera, R. / Pacheco, L. / Durán, G.	Evaluation of the geotechnical behaviour of a volcanic soil wall with additions of lime and cement against landslides	012083
Salomatova, E. S. / Kartashev, M. F. / Trushnikov, D. N. / Permykov, G. L. / Olshanskaya, T. V. / Abashev, I. R. / Fedoseeva, E. M. / Koleva, E. G.	Evaporation processes of alloying components duringwire-arcdeposition of aluminum alloy 5056	012064
Wang, M. Y. / Wu, Q.	Excited State Relaxation Dynamics of Silicon Nanosheets using Time-dependent Density Functional Tight Binding Theory	012094
Vizcarra, S. / Lujan, I. / Soto, M. / Durán, G.	Experimental analysis of the addition of rice husk ash to the clayey subgrade of a road stabilized with lime	012090
Murugesana, Mohanraj / Sajjadb, Muhammad / Jung, Dong Won	Experimental and numerical investigation of cold roll forming process	012067
Sun, Jian / Li, Chengzhan / Li, Jianguo / Cai, Jinghui	Experimental and Theoretical Investigation of Nonlinear Dynamic characteristics in an Oil-free Moving Coil Linear Compressor	012086
Alvarez, N. / Gutiérrez, J. / Durán, G. / Pacheco, L.	Experimental study of the mechanical effect of a clayey soil by adding rubber powder for geotechnical applications	012057
Zhao, Zhen Yu / Zhang, Zhen Jiu / Yin, Bo / Xu, Xiao Mei	Experimental Study on Continuous Laser Polishing Die Steel S136D	012037
Xiao, Haibing / Zhang, SongLing / Zhou, Yongquan / Xu, Xiaomei / Luo, Bowei	Finite element analysis and experimental study on laser welding temperature field of dissimilar metal materials	012061
Zhengang, FENG / Fengjie, CAI / Dongdong, YAO / Xinjun, LI	FM analysis of aging properties of UV531/SBS modified bitumen	012068
Muslim, N. / Soon, Y. W. / Voo, N. Y.	Growth and infrared switching properties of deposited VO2 films at various sputtering power with a VO2 target by RF magnetron sputtering	012019
Álvarez, A. / Sosa, J. / Durán, G. / Pacheco, L.	Improved mechanical properties of a high plasticity clay soil by adding recycled PET	012075
Zou, Q. Y. / Yang, G. N. / Wang, P. Y. / Zhang, Y. / Cui, C. Q. / Zhang, K.	An improved pretreatment method for the fabrication of Cu-Ag core-shell nanoparticles	012035
Liang, Wanting / Deng, Shijie / Zhou, Zhihong / Li, Xiaoyong / Xu, Lei	Improvement in microstructure and properties of MgO-C refractory by addition of Fe	012028
Chang, E. / Villalta, J. / Fernández, C. / Durán, G.	Improvement of physical, mechanical and strength behavior of cohesive soils with natural pozzolana and brick dust	012038
Bai, Xuefeng / Wu, Wei	Influence of Cr3+ Doping on Photocatalytic Hydrogen Production Performance of TiO2 Film Growing in Situ on the Surface of Ti Plate	012074
Tong, Zhaojie / Zhang, Hailong	Influential Parameter analysis of spread GFRP stay-in-place form deformation	012089
Sajjada, Muhammad / Murugesanb, Mohanraj / Jung, Dong Won	Investigation of bow defect in roll forming	012069
Artemov, A. O. / Naumov, S. V. / Ignatov, M. N. / Belinin, D. S.	Investigation of process for producing carbide-containing welding fused fluxes using plasma granulation	012054
Yin, Bo / Zhao, Zhenyu / Xiao, Haibing / Liu, Mingjun / Hu, Wen	Kinematic synthesis of a reconfigurable robot manipulator with lattice morphing mechanisms based on enhanced QPSO	012032
Castillo, M. / Hernández, K. / Rodríguez, J. / Eyzaguirre, C.	Low Permeability Concrete for Buildings Located in Marine Atmosphere Zone using Clay Brick Powder	012093
Di, Baojun / Hu, Qigao / Shen, Zhiqiang / Zhang, Wei / Wang, Chongxu	Low velocity impact analysis of high-order rectangular FG-CNTRC plates using the weak form QEM	012097
Fang, Tiancheng / Ren, Fushen / Cheng, Xiaoze / Hu, Qing / Tong, Tiexin	Mathematical modeling and analysis of energy conversion efficiency of particle jet accelerating nozzle	012053
Zhang, Huifeng / Bai, Xue	Mechanical behaviour of slenderness CFST filled with DCLs under axial compression	012024
Wu, Jing / Zhang, Xiangming	A Mechanical Model of Carbon Fiber Composite Materials based on Interfacial Effect	012003
Flores, H. / Bernuy, G. / Huerta, C.	Mechanical properties and self-cleaning mortar capacity C/A 1: 5 of Portland cement modified with titanium dioxide (TiO2)	012060
Espinoza, A. / Jiménez, B. / Rodríguez, J. / Eyzaguirre, C.	Mechanical Properties of an Eco-friendly Concrete with partial replacement of POC and Rubber	012011
Rivera, G. / Velasquez, L. / Bravo, A. / Miñano, P.	Methodology for determining optimized traffic light cycles based on simulation	012047
Bao, Liang Liang / Wang, Yong / Han, Tao	Microstructure and mechanical characterization of high strength low alloy steel welded joint by hybrid laser arc welding	012045
Li, Kene / Mo, Qiaoliang / Zhang, Zeng / Liu, Bei	A Mobile Robot Path Planning Scheme for Dynamic Environments	012026
Zhu, Z. H. / Zhang, N. / Zhang, Y. / Hao, M. Y. / Wu, H. W.	Modification of the prediction model of the tensile strength of short fiber reinforced polymer composites	012027
Wang, Baojin / Wang, Zhongyang / Zhu, Anhe / Hongda, Wang / Ren, Fushen	Numerical analysis and Experimental Investigation of Lateral vibration on Drill String under Axial Load Constrained with Horizontal Pipe	012076
Li, Hongjun / Xu, Zhuang / Zhou, Zhewei	Numerical simulation of the plunge stage of friction surfacing of AA5083 aluminum alloy	012043
Naumov, S. V. / Artemov, A. O. / Kartashev, M. F. / Sheksheev, M. A.	Obtaining welding materials of various structures, fractional and chemical composition using plasma granulation	012055
Zamora-Paredes, V. / Arauzo-Gallardo, L. / Raymundo-Ibañez, C. / Perez, Moises	Optimal mesh design methodology considering geometric parameters for rock fragmentation in open-pit mining in the Southern Andes of Peru	012015
Torres-Sanchez, V. / Olivas-Maldonado, P. / Diaz-Huaina, G. / Raymundo-Ibañez, C. / Perez, Moises	Optimized Method of Estimating Mineral Reserves Using the O’Hara Mathematical Model for Underground Mining in Peru	012016
Ma, Jiajun / Yan, Luhui / Xu, Mohan	Penetration resistance of concrete reinforced by hybrid fibre subjected to multiple projectile impacts	012004
Chen, Xiuping / Zhang, Yunyue / Fan, Sheng / Du, Weichao	The performance of a novel inorganic organic composite drilling fluids loss reducer AM/AA/GO	012096
Cheng, Hsuhui / Jang, Liangwei / Chen, Shiaoshing / Chen, Huamin	Photocatalytic Activity of Cu-based Nanoparticles Synthesized by Glycine-Nitrate Combustion Technique	012052
Prasad, Manish / XiaoBing, Song	Post-cracking Poisson Ratio of Concrete in Steel-Concrete-Steel Panels Subjected to Biaxial Tension Compression	012081
Quang, P. / Hao, P. T.	The Preparation and Characterization of Cu/AA6061 multi-layer Composte produced by Accumulated Roll Bonding	012099
Wei, X. Z. / Gao, S. S. / Tang, P. S. / Zhang, L. Q. / Hou, R. P. / Chen, H. F.	Preparation of Eu(Avobenzone)3TPPO by precipitation method and its luminescence performance	012095
Manrique, A. / Saman, J. / Rodriguez, S. / Melendez, K.	Productivity improvement of tower crane in tall buildings	012042
Xie, Fang / Diao, Guiqiang / Qiang, Na / Xiao, Dingshu	Properties of AlN-MWCNTs/epoxy Nanocomposites	012034
Cruz, J. / Ñiquin, J. / Bragagnini, I. / Sotomayor, C.	Proposal of Flowable Fill Designs for improvement of excavation and filling works of trenches in sanitation systems	012091
Nepal, Dikshit Babu / Deng, Jianliang / Chen, Jinjian / Maakoe, Tshegofatso	Re-liquefaction of Sand in Shaking Table	012050
Liu, Di / Liu, Xiaoli / Pei, Xuming / Wang, Caidong / Chen, Lumin	A regenerative chatter observer analysis for micro-milling	012066
Luo, Guo Bo / Pan, Zheng Bin / Yang, Xue Rui	Reinforcement research of a built project due to functional transformation	012007
Jianpeng, Huang / Xiyang, Jiang / Yifei, Tong / Feng, Gu	Research of elevator real time monitoring method based on spark	012078
Huang, Yu Han / Pan, Zheng Bin / Luo, Guo Bo / Chen, Long	Research on anti-floating reinforcement of an existing project	012008
Chengfei, Fan / Kezhi, Yang / Wei, Mao / Jinghua, Huang / Xinwei, Liu	Research on Attenuating Mechanism of Wave-eliminating Interceptor on Explosion shock wave in Tunnel Engineering	012012
Chengfei, Fan / Bukui, Zhou / Xigui, Tao / Lubo, Hao / Xiaochen, Zhang / Chaofeng, Li	Research on Influence Law of Explosion Load on New Subway Cross-structure	012006
Liu, Kelong / Lu, Zhiming / He, Chunguang / Zhong, Xiaoxing / Jiao, Yang / Fan, Liangzhong	Research on key technology of jacking cable tunnel construction in mudstone and gravel composite stratum	012017
Zhang, Kunyan / Yang, Lianfa / Chen, Zhanbin / Huang, Jinjie / Ma, Jianping / Zong, Pengju / Jiang, Jingyu / Liu, Jun / Li, Xianzhang	The research status of key problems of experimental equipment for tube hydroforming	012079
Chen, Zhanbin / Yang, Lianfa / Zhang, Kunyan / Jiang, Jingyu / Zong, Pengju	Research Status of Ultrasonic Vibration Assisted Plastic Forming Process	012036
Liu, Yakun / Zhang, Di / Wu, Jian / Zhang, Dong / Yang, Miaomiao	Roughened bed stilling basin and its hydraulic jump characteristics	012082
Gebremedhn, Zenagebriel / Qiao, Guofu / Sun, Lu	Seismic Effect Analysis of the Adjacent Longitudinal Box Culvert for the Utility Tunnel	012084
Zhang, Huifeng / Cong, Junping	Sensitive behaviour of slenderness CFST filled with DCLs under axial compression	012025
Zhu, Z. H. / Zhang, N. / Wang, T. / Hao, M. Y.	Short Review of Polymer Composites for 3D Printing	012046
Ormeño, E. / Rivas, N. / Durán, G. / Soto, M.	Stabilization of a Subgrade Composed by Low Plasticity Clay with Rice Husk Ash	012058
Hidalgo, F. / Saavedra, J. / Fernández, C. / Durán, G.	Stabilization of clayey soil for subgrade using rice husk ash (RHA) and sugarcane bagasse ash (SCBA)	012041
Sagiroun, Mamoun I. A. / Xinrong, Cao / Ayoub, Anuor A. T.	Study and assessment of (FeCrAl) and (SiC) as candidate materials for accident tolerant fuel cladding in LWRs	012085
Yan, Shuaishuai / Zhang, Ming	Study on anti-permeability of specified density concrete	012072
Lai, Jie / Liu, Yun / Wang, Wei / Gao, Chen-qiang / Niu, Zi-rong / Zhu, Hai-bo	Study on dynamic behaviors of a breakwater triggered by earthquakes	012033
Lin, W. Y. / Zhang, Z. H. / Qiu, X. / Xu, W. Y. / Hong, H. J.	Study on Temperature Related Factors of Asphalt Pavement Based on APRIORI	012030
Peng, Yongjing / Fang, Zhen / Wang, Bowen / Hu, Jianping / Xie, Pengkang	Study on ZnO Varistors Doped with Y2O3 by Microwave Two-step Sintering	012018
Hong Son, N. / Duc Trung, D. / Nguyen, Nhu-Tung	Surface Roughness Prediction in Grinding Process of the SKD11 Steel by using Response Surface Method	012029
Qiu, X. / Xu, W. Y. / Zhang, Z. H. / Li, N. N. / Hong, H. J.	Surface Temperature Prediction of Asphalt Pavement Based on GBDT	012031
Du, Weichao / Wei, Jinwen / Zhang, Yunyue / Chen, Gang / Zhang, Jie	Synthesis and property of a novel clay anti-swelling agent	012098
Wang, Han / Guo, Chunmu / Meng, Jinying / Li, Ting / Luo, Le / Wang, Quan / Wu, Wei	Synthesis of SAPO-41 Molecular Sieves with Different SiO2/Al2O3 Ratios and their Catalytic Performance of n-Decane Hydroisomerization	012080
Chengyi, Pan / Yuanqi, Tong / Guanqun, Cao	Testing research on friction and wear performance of microstructure surface of unfolding wheel for bearing steel ball detection	012088
Chávez, H. / Pezo, A. / Llerena, G. / Torres, V.	Theoretical design proposal for simulated hot asphalt mixture at a temperature below zero degrees Celsius	012059
Pinchi, S. / Ramírez, J. / Rodríguez, J. / Eyzaguirre, C.	Use of recycled broken bricks as Partial Replacement Coarse Aggregate for the Manufacturing of Sustainable Concrete	012039
Moustafa, Mohamed / Ruifeng, Tian / Emam, Islam S.	Wavy water thin-film characteristics on horizontal plate using PLIF Experimental	012073

About this
data sheet
IssueID
37494
Published on:
25/08/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

IOP Conference Series: Materials Science and Engineering - February 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

IOP Conference Series: Materials Science and Engineering - February 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.