Frattura ed Integrità Strutturale - v. 15, n. 57 (June 2021)

Published:	June 2021

Articles in this Issue

Author(s)	Title	Page(s)
Patil, Hiralal S. / Patel, D. C.	Age hardening heat treatment behavior of as-cast Mg–Zn–Al alloys	350-358
Salem, Tarek / Maaly, Hassan / Abdelbaset, Ahmed	Analysis of Above-Ground Steel Storage Tanks Resting Over Piles or Stone Columns	40-49
Słowik, Marta	Analysis of fracture processes in reinforced concrete beams without stirrups	321-330
Sobhy, Asmaa / Aboul Nour, Louay / Hassan, Hilal / Elsisi, Alaaeldin	Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading	70-81
Wang, Bo	Dynamic strength analysis of the key components of the beam-type pumping unit with dynamic tracking balance	291-299
Azadi, Mohammad / Basiri, Adel / Dadashi, Ali / Winter, G. / Seisenbacher, B. / Grun, F.	Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy: Effect of nano-clay addition and heat-treatment	373-397
Patil, Hiralal S. / Patel, D. C.	The effect of surface texturing in the sliding surface on tribological characteristics of alloy steel under wet condition	1-13
Nawar, Mahmoud / El-Awady, Kareem / Shehab, Hamdy / Eisa, Ahmed	Enhancement of Blast Resistance of R.C Beams Using Micro/Nano Silica in Presence of Steel Fibers	259-280
Cunha, Rafael / Oliveira, Kevin / Brito, António / Vieira, Camila / Amorim, David	Evaluation of the behaviour of reinforced concrete beams repaired with glass fibre reinforced polymer (GFRP) using a damage variable	82-92
Fadela, Allaoua / Habib, Lebbal / Abderrahmane, Belarbi	Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier	281-290
Bharath, V. / Auradi, V. / Nagaral, Madeva	Fractographic characterization of Al2O3p particulates reinforced Al2014 alloy composites subjected to tensile loading	14-23
Hammoum, Hocine / Aliche, Amar / Bouzelha, Karima / Aoues, Younes / Amiri, Ouali / Mehani, Youcef	Fragility analysis of concrete elevated water tanks under seismic loads	93-113
Fincato, Riccardo / Tsutsumi, Seiichiro / Zilio, Alex / Mazzucco, Gianluca / Salomoni, Valentina	Fully implicit numerical integration of the Yoshida-Uemori two-surface plasticity model with isotropic hardening stagnation	114-126
Moreira, Maria / Ramos, João Carlos / Messias, Ana / Neto, Maria Augusta / Amaro, Ana Paula / Reis, Paulo NB	Impact response of different materials for sports mouthguards	63-69
Sgambitterra, Emanuele / Niccoli, Fabrizio	Inverse problems with the digital image correlation: approach and applications	300-320
Chandrashekar, J. R. / Annaiah, M. H. / Chandrashekar, R.	Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles	127-137
Derouiche, Sami / Bouziane, Salah / Bouzerd, Hamoudi	Mixed Finite Element Computation of Energy Release Rate in Anisotropic Materials Based on Virtual Crack Closure-Integral Method	359-372
Bentahar, Mohammed / Benzaama, Habib / Noureddin, Mahmoudi	Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model	182-194
Boudina, Tounsia / Benamara, Dalila / Zaitri, Rebih	Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling	50-62
Chaib, Mohammed / Slimane, Abdelkader / Slimane, Sid Ahmed / Ziadi, Abdelakder / Bouchouicha, Benattou	Optimization of Ultimate Tensile Strength with DOE Approach for Application FSW Process in the Aluminum alloys AA6061-T651 & AA7075 -T651	169-181
Farid, Boursas / Boutagouga, Djamel	Parametric study of I-shaped shear connectors with different orientations in push-out test	24-39
Boudjemaa, Ismail / Sahli, A. / Benkhettou, A. / Benbarek, S.	Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface	160-168
Ciro Zuleta, Erwin / Lupi, Carla / Felli, Ferdinando / Paris, Claudio / Vendittozzi, Cristian	Railway overhead contact wire monitoring system by means of FBG sensors	246-258
Sadeghi, Abbasali / Kazemi, Hamid / Samadi, Maysam	Reliability and Reliability-based Sensitivity Analyses of Steel Moment-Resisting Frame Structure subjected to Extreme Actions	138-159
Benyahi, Karim / Kachi, Mohand Said / Bouafia, Youcef / Barboura, Salma / Li, Jia	Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure	195-222
Andreotti, Riccardo / Abate, Sergio / Casaroli, Andrea / Quercia, Mauro / Fossati, Riccardo / Boniardi, Marco V.	A Simplified ALE model for finite element simulation of ballistic impacts with bullet splash – development and experimental validation	223-245
Kusch, Andrea / Salamina, Simone / Crivelli, Daniele / Berto, Filippo	Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading	331-349

About this
data sheet
IssueID
58798
Published on:
08/07/2021
Last updated on:
08/07/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 15, n. 57 (June 2021)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 15, n. 57 (June 2021)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.