Frattura ed Integrità Strutturale - v. 15, n. 57 (juin 2021)

Publié:	juin 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Patil, Hiralal S. / Patel, D. C.	Age hardening heat treatment behavior of as-cast Mg–Zn–Al alloys	350-358
Salem, Tarek / Maaly, Hassan / Abdelbaset, Ahmed	Analysis of Above-Ground Steel Storage Tanks Resting Over Piles or Stone Columns	40-49
Słowik, Marta	Analysis of fracture processes in reinforced concrete beams without stirrups	321-330
Sobhy, Asmaa / Aboul Nour, Louay / Hassan, Hilal / Elsisi, Alaaeldin	Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading	70-81
Wang, Bo	Dynamic strength analysis of the key components of the beam-type pumping unit with dynamic tracking balance	291-299
Azadi, Mohammad / Basiri, Adel / Dadashi, Ali / Winter, G. / Seisenbacher, B. / Grun, F.	Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy: Effect of nano-clay addition and heat-treatment	373-397
Patil, Hiralal S. / Patel, D. C.	The effect of surface texturing in the sliding surface on tribological characteristics of alloy steel under wet condition	1-13
Nawar, Mahmoud / El-Awady, Kareem / Shehab, Hamdy / Eisa, Ahmed	Enhancement of Blast Resistance of R.C Beams Using Micro/Nano Silica in Presence of Steel Fibers	259-280
Cunha, Rafael / Oliveira, Kevin / Brito, António / Vieira, Camila / Amorim, David	Evaluation of the behaviour of reinforced concrete beams repaired with glass fibre reinforced polymer (GFRP) using a damage variable	82-92
Fadela, Allaoua / Habib, Lebbal / Abderrahmane, Belarbi	Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier	281-290
Bharath, V. / Auradi, V. / Nagaral, Madeva	Fractographic characterization of Al2O3p particulates reinforced Al2014 alloy composites subjected to tensile loading	14-23
Hammoum, Hocine / Aliche, Amar / Bouzelha, Karima / Aoues, Younes / Amiri, Ouali / Mehani, Youcef	Fragility analysis of concrete elevated water tanks under seismic loads	93-113
Fincato, Riccardo / Tsutsumi, Seiichiro / Zilio, Alex / Mazzucco, Gianluca / Salomoni, Valentina	Fully implicit numerical integration of the Yoshida-Uemori two-surface plasticity model with isotropic hardening stagnation	114-126
Moreira, Maria / Ramos, João Carlos / Messias, Ana / Neto, Maria Augusta / Amaro, Ana Paula / Reis, Paulo NB	Impact response of different materials for sports mouthguards	63-69
Sgambitterra, Emanuele / Niccoli, Fabrizio	Inverse problems with the digital image correlation: approach and applications	300-320
Chandrashekar, J. R. / Annaiah, M. H. / Chandrashekar, R.	Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles	127-137
Derouiche, Sami / Bouziane, Salah / Bouzerd, Hamoudi	Mixed Finite Element Computation of Energy Release Rate in Anisotropic Materials Based on Virtual Crack Closure-Integral Method	359-372
Bentahar, Mohammed / Benzaama, Habib / Noureddin, Mahmoudi	Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model	182-194
Boudina, Tounsia / Benamara, Dalila / Zaitri, Rebih	Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling	50-62
Chaib, Mohammed / Slimane, Abdelkader / Slimane, Sid Ahmed / Ziadi, Abdelakder / Bouchouicha, Benattou	Optimization of Ultimate Tensile Strength with DOE Approach for Application FSW Process in the Aluminum alloys AA6061-T651 & AA7075 -T651	169-181
Farid, Boursas / Boutagouga, Djamel	Parametric study of I-shaped shear connectors with different orientations in push-out test	24-39
Boudjemaa, Ismail / Sahli, A. / Benkhettou, A. / Benbarek, S.	Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface	160-168
Ciro Zuleta, Erwin / Lupi, Carla / Felli, Ferdinando / Paris, Claudio / Vendittozzi, Cristian	Railway overhead contact wire monitoring system by means of FBG sensors	246-258
Sadeghi, Abbasali / Kazemi, Hamid / Samadi, Maysam	Reliability and Reliability-based Sensitivity Analyses of Steel Moment-Resisting Frame Structure subjected to Extreme Actions	138-159
Benyahi, Karim / Kachi, Mohand Said / Bouafia, Youcef / Barboura, Salma / Li, Jia	Reliability assessment of the behavior of reinforced and/or prestressed concrete beams sections in shear failure	195-222
Andreotti, Riccardo / Abate, Sergio / Casaroli, Andrea / Quercia, Mauro / Fossati, Riccardo / Boniardi, Marco V.	A Simplified ALE model for finite element simulation of ballistic impacts with bullet splash – development and experimental validation	223-245
Kusch, Andrea / Salamina, Simone / Crivelli, Daniele / Berto, Filippo	Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading	331-349

Informations
sur cette fiche
IssueID
58798
Publié(e) le:
08.07.2021
Modifié(e) le:
08.07.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 15, n. 57 (juin 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 15, n. 57 (juin 2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.