Frattura ed Integrità Strutturale - v. 13, n. 50 (September 2019)

Published:	September 2019

Articles in this Issue

Author(s)	Title	Page(s)
Pereira, Sebastião Salvador Real / Carvalho, Hermes / Dias, João Victor Fragoso / Verga Mendes, Victor Roberto / Montenegro, Pedro Aires	' Behavior of precast reinforced concrete columns subjected to monotonic short-term loading	242-250
Singh, Kulbir / Robertson, Christian / Bhaduri, Arun Kumar	Brittle Fracture Model Parameter Estimation for Irradiated BCC Material through Dislocation Based Crystal Plasticity Model	319-330
Boychenko, Natalia V. / Ishtyryakov, Ivan	Characterization of stress-strain state in gas turbine engine compressor disc taking into account damage accumulation	54-67
Marinelli, Aikaterini / Stewart, Matthew	Comparative experimental study of the mechanical and fracture properties of Portland limestone and Corsehill sandstone	438-450
Shou, He Zi / Hu, Qijun / Zeng, Junsen / He, Leping / Tang, Hexi / Li, Bingsheng / Chen, Shunzhang / Lu, Xirui	Comparative study on the deterioration of granite under microwave irradiation and resistance-heating treatment	638-648
Apostolopoulos, Charis / Drakakaki, Argyro / Apostolopoulos, Alkiviadis / Koulouris, Konstantinos	Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms	548-559
Tijani, Amal / Meknassi, Meryam / Chaffoui, Hassan / El Ghorba, Mohamed	Corrosion’s impact on wire rope strand response – Comparison with a theoretical predictive model	141-148
Sarkar, Aritra / Okazaki, M. / Nagesha, A. / Sandhya, R.	Crack growth based life prediction approach under LCF-HCF interaction	86-97
abdallah, Salmi / Elajrami, Mohamed / Slimani, Mohamed El-Amine	Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy	231-241
Kakaliagos, Aristotle / Ninis, Nikolaos	Damage and failure of Orban’s gun during the bombardment of Constantinople walls in 1453	481-496
Stavrakas, Ilias / Kourkoulis, Stavros / Triantis, Dimos	Damage evolution in marble under uniaxial compression monitored by Pressure Stimulated Currents and Acoustic Emissions	573-583
Papuga, Jan / Nesládek, Martin / Jurenka, Josef	Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading	163-183
Markides, Christos	Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length	451-470
Khiat, Sidi Mohammed Amine / Zenasni, Ramdane / Hamdi, Mawloud	Effect of Environmental Conditions on the Resistance of Damaged Composite Materials	595-601
Vshivkov, Aleksei / Plekhov, Oleg	The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading	1-9
Lekatou, Angeliki / Tsouli, Sofia / Nikolaidis, Christos / Kleftakis, Spyridon / Tragazikis, Ilias / Matikas, Theodoros	Effect of fly ash on the corrosion performance and structural integrity of stainless steel concrete rebars in acid rain and saline environments	423-437
Iasnii, Volodymyr / Yasniy, Petro / Baran, Denys / Rudawska, Anna	The effect of temperature on low-cycle fatigue of shape memory alloy	310-318
Antunes, Fernando Ventura / Borges, Micael Frias / Prates, Pedro / Branco, Ricardo / Oliveira, Marta	Effect of yield stress on fatigue crack growth	9-19
Mouhat, Ouadia / Bybi, Abdelmajid / El Bouhmidi, Ahmed / Rougui, Mohamed	The Effects of Ply Orientation on Nonlinear Buckling of Aircraft composite Stiffened Panel	126-140
Boutelidja, Racim / Guedri, Abdelmoumene / Belyamna, Mohammed Amine / Merzoug, Bachir	Environmental effects on the reliability of an AISI 304 structure	98-111
Ameri, Mahmoud / Nemati, Mehdi / Shaker, Hamid / Jafari, Faezeh	Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber	149-162
Chatzidai, Nikoletta / Karalekas, Dimitrios	Experimental and numerical study on the influence of critical 3D printing processing parameters	407-413
Olmo, José Manuel Vasco / Díaz, F. A. / Antunes, F. V. / James, M. N.	Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC
Aliha, M. R. M. / Ghazi, Hussein / Ataei, Farkhondeh	Experimental fracture resistance study for cracked bovine femur bone samples	602-612
Qiu, Peng	Experimental Research on Fracture Behavior of Concrete after High Temperature	300-309
Dakanali, Ioanna / Marinelli, Aikaterini	An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks	370-382
Gavela, Stamatia / Nikoloutsopoulos, Nikolaos / Papadakos, George / Passa, Dimitra / Sotiropoulou, Anastasia	Experimental uncertainty budget for concrete compressive strength test based on a multifactorial analysis	383-394
Jafari, Faezeh / Badarloo, Baitollah	Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building	209-230
Triantis, Dimos / Kourkoulis, Stavros	Fracture precursor phenomena in marble specimens under uniaxial compression by means of Acoustic Emission data	537-547
Martini, Niki / Koukou, Vaia / Fountos, George / Valais, Ioannis / Kandarakis, Ioannis / Michail, Christos / Bakas, Athanasios / Lavdas, Eleftherios / Ninos, Konstantinos / Oikonomou, Georgia / Gogou, Lida / Panayiotakis, George	Imaging performance of a CaWO4/CMOS sensor	471-480
Eremin, Mikhail Olegovich / Smolin, Igor / Kulkov, Alexey / Mikushina, Valentina	Investigation of Failure Mechanism of Al2O3 Specimens Subjected to Three-Point Bending Test	38-45
Belhamiani, Mohamed / Belhadri, Djamel Eddine / Oudad, Wahid / Mansouri, Omar / Bouzitouna, Wahiba Nessrine	J integral computation and Limit load analysis of bonded composite repair in cracked pipes under pressure	623-637
Silva, Israel Gleybson Ferreira da / de Andrade, Arnaldo Homobono Paes / Monteiro, Waldemar Alfredo	Leak-Before-Break methodology applied to different piping materials: a performance evaluation	46-53
Papantoniou, Ioannis / Kyriakopoulou, Helena / Pantelis, Dimitrios / Manolakos, Dimitrios	Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency	497-504
Romanin, Luca / Ferro, Paolo / Fabrizi, Alberto / Berto, Filippo	A metallurgical and thermal analysis of Inconel 625 electron-beam welded joints	251-263
Baghdadi, Mohammed / Serier, Boualem / Salem, Mokadem / Zaoui, Bouchra / Kaddouri, Khacem	Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance	68-85
Seretis, Georgios / Polyzou, Aikaterini / Manolakos, Dimitrios / Provatidis, Christopher	Multi-parameter analysis of curing cycle for GNPs/glass fabric/ epoxy laminated nanocomposites	517-525
Fountas, Nikolaos / Koutsomichalis, Angelos / Kechagias, John / Vaxevanidis, Nikolaos	Multi-response optimization of CuZn39Pb3 brass alloy turning by implementing Grey Wolf algorithm	584-594
Meftah, Kamel / Sedira, Lakhdar	A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method	276-285
Khandouzi, Ghorban / Mollashahi, Mohsen / Moosakhani, Mojtaba	Numerical simulation of crack propagation behavior of a semi-cylindrical specimen under dynamic loading	29-37
Plekhov, Oleg / Kostina, Anastasiya / Aizikovich, Sergey	Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data	667-683
Belokas, Georgios	Probabilistic geotechnical engineering analysis based on first order reliability method	354-369
Godio, Michele / Beyer, Katrin	Quantifying the out-of-plane response of unreinforced masonry walls subjected to relative support motion	194-208
Pasiou, Ermioni	Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques	560-572
Kytopoulos, Victor / Sideridis, Emilios / Venetis, John / Riga, Chrysoula / Altzoumailis, Alexandros	A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs	414-422
Kaklis, Kostas / Agioutantis, Zach / Mavrigiannakis, Stelios / Maravelaki-Kalaitzaki, Pagona	A simplified damage evolution relationship and deformation character¬istics of a pozzolanic lime mortar when subjected to unloading-reloading cycles in the pre-peak region	395-406
Alexopoulos, Nikolaos / Siskou, Nikoleta / Charalampidou, Christina-Margarita / Kourkoulis, Stavros	Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches	342-353
Huang, Xiaoguang / Han, Zhongying	Stress corrosion behavior of X80 pipeline steel in natural seawater with different dissolved oxygen	21-28
Livieri, Paolo / Segala, Fausto	Stress intensity factor for small embedded cracks in weldments	613-622
He, Leping / Gu, Yucheng / Hu, Qijun / Chen, Yuan / Zeng, Junsen	Structural failure process of schistosity rock under microwave radiation at high temperatures	649-657
Saltas, Vassilios / Peraki, Despoina / Vallianatos, Filippos	The use of acoustic emissions technique in the monitoring of fracturing in concrete using soundless chemical demolition agent	505-516
Papachristoforou, Michail / Mitsopoulos, Vasilios / Stefanidou, Maria	Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance	526-536
Benamar, Badr / Mokhtari, Mohamed / Madani, Kouider / Benzaama, Habib	Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint	112-125
Chaht, Fouzia Larbi / Mokhtari, Mohamed / Benzaama, Habib	Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior	331-341
Benzaama, Abdallah / Mokhtari, Mohamed / Benzaama, Habib / Abdelouahed, Elamine / Tamine, Tawfik / Madani, Kouider / Slamen, Amir / Ilies, Mrabet	Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load	184-193
Saidi, Hayat / Sahla, Meriem	Vibration analysis of functionally graded plates with porosity composed of a mixture of Aluminum (Al) and Alumina (Al2O3) embedded in an elastic medium	286-299
Silva, Carla Cristiane / Caldas, Rodrigo Barreto / Fakury, Ricardo Hallal / Carvalho, Hermes / Dias, João Victor Fragoso	Web Rotational Stiffness of Continuous Steel-Concrete Composite Castellated Beams	264-275

About this
data sheet
IssueID
37984
Published on:
24/10/2020
Last updated on:
24/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Frattura ed Integrità Strutturale - v. 13, n. 50 (September 2019)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Frattura ed Integrità Strutturale - v. 13, n. 50 (September 2019)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.