Frattura ed Integrità Strutturale - v. 13, n. 50 (septembre 2019)

Publié:	septembre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Pereira, Sebastião Salvador Real / Carvalho, Hermes / Dias, João Victor Fragoso / Verga Mendes, Victor Roberto / Montenegro, Pedro Aires	' Behavior of precast reinforced concrete columns subjected to monotonic short-term loading	242-250
Singh, Kulbir / Robertson, Christian / Bhaduri, Arun Kumar	Brittle Fracture Model Parameter Estimation for Irradiated BCC Material through Dislocation Based Crystal Plasticity Model	319-330
Boychenko, Natalia V. / Ishtyryakov, Ivan	Characterization of stress-strain state in gas turbine engine compressor disc taking into account damage accumulation	54-67
Marinelli, Aikaterini / Stewart, Matthew	Comparative experimental study of the mechanical and fracture properties of Portland limestone and Corsehill sandstone	438-450
Shou, He Zi / Hu, Qijun / Zeng, Junsen / He, Leping / Tang, Hexi / Li, Bingsheng / Chen, Shunzhang / Lu, Xirui	Comparative study on the deterioration of granite under microwave irradiation and resistance-heating treatment	638-648
Apostolopoulos, Charis / Drakakaki, Argyro / Apostolopoulos, Alkiviadis / Koulouris, Konstantinos	Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms	548-559
Tijani, Amal / Meknassi, Meryam / Chaffoui, Hassan / El Ghorba, Mohamed	Corrosion’s impact on wire rope strand response – Comparison with a theoretical predictive model	141-148
Sarkar, Aritra / Okazaki, M. / Nagesha, A. / Sandhya, R.	Crack growth based life prediction approach under LCF-HCF interaction	86-97
abdallah, Salmi / Elajrami, Mohamed / Slimani, Mohamed El-Amine	Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy	231-241
Kakaliagos, Aristotle / Ninis, Nikolaos	Damage and failure of Orban’s gun during the bombardment of Constantinople walls in 1453	481-496
Stavrakas, Ilias / Kourkoulis, Stavros / Triantis, Dimos	Damage evolution in marble under uniaxial compression monitored by Pressure Stimulated Currents and Acoustic Emissions	573-583
Papuga, Jan / Nesládek, Martin / Jurenka, Josef	Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading	163-183
Markides, Christos	Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length	451-470
Khiat, Sidi Mohammed Amine / Zenasni, Ramdane / Hamdi, Mawloud	Effect of Environmental Conditions on the Resistance of Damaged Composite Materials	595-601
Vshivkov, Aleksei / Plekhov, Oleg	The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading	1-9
Lekatou, Angeliki / Tsouli, Sofia / Nikolaidis, Christos / Kleftakis, Spyridon / Tragazikis, Ilias / Matikas, Theodoros	Effect of fly ash on the corrosion performance and structural integrity of stainless steel concrete rebars in acid rain and saline environments	423-437
Iasnii, Volodymyr / Yasniy, Petro / Baran, Denys / Rudawska, Anna	The effect of temperature on low-cycle fatigue of shape memory alloy	310-318
Antunes, Fernando Ventura / Borges, Micael Frias / Prates, Pedro / Branco, Ricardo / Oliveira, Marta	Effect of yield stress on fatigue crack growth	9-19
Mouhat, Ouadia / Bybi, Abdelmajid / El Bouhmidi, Ahmed / Rougui, Mohamed	The Effects of Ply Orientation on Nonlinear Buckling of Aircraft composite Stiffened Panel	126-140
Boutelidja, Racim / Guedri, Abdelmoumene / Belyamna, Mohammed Amine / Merzoug, Bachir	Environmental effects on the reliability of an AISI 304 structure	98-111
Ameri, Mahmoud / Nemati, Mehdi / Shaker, Hamid / Jafari, Faezeh	Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber	149-162
Chatzidai, Nikoletta / Karalekas, Dimitrios	Experimental and numerical study on the influence of critical 3D printing processing parameters	407-413
Olmo, José Manuel Vasco / Díaz, F. A. / Antunes, F. V. / James, M. N.	Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC
Aliha, M. R. M. / Ghazi, Hussein / Ataei, Farkhondeh	Experimental fracture resistance study for cracked bovine femur bone samples	602-612
Qiu, Peng	Experimental Research on Fracture Behavior of Concrete after High Temperature	300-309
Dakanali, Ioanna / Marinelli, Aikaterini	An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks	370-382
Gavela, Stamatia / Nikoloutsopoulos, Nikolaos / Papadakos, George / Passa, Dimitra / Sotiropoulou, Anastasia	Experimental uncertainty budget for concrete compressive strength test based on a multifactorial analysis	383-394
Jafari, Faezeh / Badarloo, Baitollah	Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building	209-230
Triantis, Dimos / Kourkoulis, Stavros	Fracture precursor phenomena in marble specimens under uniaxial compression by means of Acoustic Emission data	537-547
Martini, Niki / Koukou, Vaia / Fountos, George / Valais, Ioannis / Kandarakis, Ioannis / Michail, Christos / Bakas, Athanasios / Lavdas, Eleftherios / Ninos, Konstantinos / Oikonomou, Georgia / Gogou, Lida / Panayiotakis, George	Imaging performance of a CaWO4/CMOS sensor	471-480
Eremin, Mikhail Olegovich / Smolin, Igor / Kulkov, Alexey / Mikushina, Valentina	Investigation of Failure Mechanism of Al2O3 Specimens Subjected to Three-Point Bending Test	38-45
Belhamiani, Mohamed / Belhadri, Djamel Eddine / Oudad, Wahid / Mansouri, Omar / Bouzitouna, Wahiba Nessrine	J integral computation and Limit load analysis of bonded composite repair in cracked pipes under pressure	623-637
Silva, Israel Gleybson Ferreira da / de Andrade, Arnaldo Homobono Paes / Monteiro, Waldemar Alfredo	Leak-Before-Break methodology applied to different piping materials: a performance evaluation	46-53
Papantoniou, Ioannis / Kyriakopoulou, Helena / Pantelis, Dimitrios / Manolakos, Dimitrios	Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency	497-504
Romanin, Luca / Ferro, Paolo / Fabrizi, Alberto / Berto, Filippo	A metallurgical and thermal analysis of Inconel 625 electron-beam welded joints	251-263
Baghdadi, Mohammed / Serier, Boualem / Salem, Mokadem / Zaoui, Bouchra / Kaddouri, Khacem	Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance	68-85
Seretis, Georgios / Polyzou, Aikaterini / Manolakos, Dimitrios / Provatidis, Christopher	Multi-parameter analysis of curing cycle for GNPs/glass fabric/ epoxy laminated nanocomposites	517-525
Fountas, Nikolaos / Koutsomichalis, Angelos / Kechagias, John / Vaxevanidis, Nikolaos	Multi-response optimization of CuZn39Pb3 brass alloy turning by implementing Grey Wolf algorithm	584-594
Meftah, Kamel / Sedira, Lakhdar	A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method	276-285
Khandouzi, Ghorban / Mollashahi, Mohsen / Moosakhani, Mojtaba	Numerical simulation of crack propagation behavior of a semi-cylindrical specimen under dynamic loading	29-37
Plekhov, Oleg / Kostina, Anastasiya / Aizikovich, Sergey	Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data	667-683
Belokas, Georgios	Probabilistic geotechnical engineering analysis based on first order reliability method	354-369
Godio, Michele / Beyer, Katrin	Quantifying the out-of-plane response of unreinforced masonry walls subjected to relative support motion	194-208
Pasiou, Ermioni	Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques	560-572
Kytopoulos, Victor / Sideridis, Emilios / Venetis, John / Riga, Chrysoula / Altzoumailis, Alexandros	A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs	414-422
Kaklis, Kostas / Agioutantis, Zach / Mavrigiannakis, Stelios / Maravelaki-Kalaitzaki, Pagona	A simplified damage evolution relationship and deformation character¬istics of a pozzolanic lime mortar when subjected to unloading-reloading cycles in the pre-peak region	395-406
Alexopoulos, Nikolaos / Siskou, Nikoleta / Charalampidou, Christina-Margarita / Kourkoulis, Stavros	Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches	342-353
Huang, Xiaoguang / Han, Zhongying	Stress corrosion behavior of X80 pipeline steel in natural seawater with different dissolved oxygen	21-28
Livieri, Paolo / Segala, Fausto	Stress intensity factor for small embedded cracks in weldments	613-622
He, Leping / Gu, Yucheng / Hu, Qijun / Chen, Yuan / Zeng, Junsen	Structural failure process of schistosity rock under microwave radiation at high temperatures	649-657
Saltas, Vassilios / Peraki, Despoina / Vallianatos, Filippos	The use of acoustic emissions technique in the monitoring of fracturing in concrete using soundless chemical demolition agent	505-516
Papachristoforou, Michail / Mitsopoulos, Vasilios / Stefanidou, Maria	Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance	526-536
Benamar, Badr / Mokhtari, Mohamed / Madani, Kouider / Benzaama, Habib	Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint	112-125
Chaht, Fouzia Larbi / Mokhtari, Mohamed / Benzaama, Habib	Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior	331-341
Benzaama, Abdallah / Mokhtari, Mohamed / Benzaama, Habib / Abdelouahed, Elamine / Tamine, Tawfik / Madani, Kouider / Slamen, Amir / Ilies, Mrabet	Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load	184-193
Saidi, Hayat / Sahla, Meriem	Vibration analysis of functionally graded plates with porosity composed of a mixture of Aluminum (Al) and Alumina (Al2O3) embedded in an elastic medium	286-299
Silva, Carla Cristiane / Caldas, Rodrigo Barreto / Fakury, Ricardo Hallal / Carvalho, Hermes / Dias, João Victor Fragoso	Web Rotational Stiffness of Continuous Steel-Concrete Composite Castellated Beams	264-275

Informations
sur cette fiche
IssueID
37984
Publié(e) le:
24.10.2020
Modifié(e) le:
24.10.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 13, n. 50 (septembre 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 13, n. 50 (septembre 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.