Engineering Structures - October 2017

Published:	October 2017

Articles in this Issue

Author(s)	Title	Page(s)
Fedorova, Maria / Sivaselvan, M. V.	An algorithm for dynamic vehicle-track-structure interaction analysis for high-speed trains	857-877
Faridani, Hadi Moghadasi / Capsoni, Antonio	Analysis of passively-damped coupled shear walls using continuum-based models	739-754
Classen, Martin / Hegger, Josef	Assessing the pry-out resistance of open rib shear connectors in cracked concrete – Engineering model with aggregate interlock	254-262
Smith, Shushannah / Wang, Gang / Wu, Dongsheng	Bayesian approach to breathing crack detection in beam structures	829-838
Mangalathu, Sujith / Soleimani, Farahnaz / Jeon, Jong-Su	Bridge classes for regional seismic risk assessment: Improving HAZUS models	755-766
Yu, Xianglin / Deng, Hongzhou / Zhang, Donghong / Cui, Lei	Buckling behavior of 420 MPa HSSY columns: Test investigation and design approach	793-812
Shi, Zhongqi / Dimitrakopoulos, Elias G.	Comparative evaluation of two simulation approaches of deck-abutment pounding in bridges	541-551
Del Vecchio, Ciro / Del Zoppo, Marta / Di Ludovico, Marco / Verderame, Gerardo Mario / Prota, Andrea	Comparison of available shear strength models for non-conforming reinforced concrete columns	312-327
Michiels, Tim / Napolitano, Rebecca / Adriaenssens, Sigrid / Glisic, Branko	Comparison of thrust line analysis, limit state analysis and distinct element modeling to predict the collapse load and collapse mechanism of a rammed earth arch	145-156
Oktavianus, Yusak / Chang, Hongfei / Goldsworthy, Helen M. / Gad, Emad F.	Component model for pull-out behaviour of headed anchored blind bolt within concrete filled circular hollow section	210-224
Wang, Wei / Li, Mingxiao / Chen, Yiyi / Jian, Xiaogang	Cyclic behavior of endplate connections to tubular columns with novel slip-critical blind bolts	949-962
Wang, Jingfeng / Li, Beibei / Wang, Donghua / Zhao, Chunfeng	Cyclic testing of steel beam blind bolted to CFST column composite frames with SBTD concrete slabs	293-311
Ding, Yukun / Zheng, Rui	Cyclic tests for steel frame with unbonded steel plate brace encased in panel	466-484
Downey, Austin / D'Alessandro, Antonella / Baquera, Micah / García-Macías, Enrique / Rolfes, Daniel / Ubertini, Filippo / Laflamme, Simon / Castro-Triguero, Rafael	Damage detection, localization and quantification in conductive smart concrete structures using a resistor mesh model	924-935
Wang, Gaohui / Wang, Yongxiang / Lu, Wenbo / Yu, Mao / Wang, Chao	Deterministic 3D seismic damage analysis of Guandi concrete gravity dam: A case study	263-276
Mahrenholtz, Philipp / Wood, Richard L. / Eligehausen, Rolf / Hutchinson, Tara C. / Hoehler, Matthew S.	Development and validation of European guidelines for seismic qualification of post-installed anchors	497-508
Lengyel, G.	Discrete element analysis of gothic masonry vaults for self-weight and horizontal support displacement	195-209
Lantsoght, Eva O. L. / de Boer, Ane / van der Veen, Cor	Distribution of peak shear stress in finite element models of reinforced concrete slabs	571-583
Refan, Maryam / Hangan, Horia / Wurman, Joshua / Kosiba, Karen	Doppler radar-derived wind field of five tornado events with application to engineering simulations	509-521
Qian, Kai / Li, Bing	Dynamic and residual behavior of reinforced concrete floors following instantaneous removal of a column	175-184
Górski, Piotr	Dynamic characteristic of tall industrial chimney estimated from GPS measurement and frequency domain decomposition	277-292
Hedayati Dezfuli, Farshad / Li, Shuai / Shahria Alam, M. / Wang, Jing-Quan	Effect of constitutive models on the seismic response of an SMA-LRB isolated highway bridge	113-125
Kumar, Manish / Whittaker, Andrew S.	Effect of seismic hazard definition on isolation-system displacements in nuclear power plants	424-435
Yacoubian, Mehair / Lam, Nelson / Lumantarna, Elisa / Wilson, John L.	Effects of podium interference on shear force distributions in tower walls supporting tall buildings	639-659
Ventura, A. / De Biagi, V. / Chiaia, B.	Effects of rockfall on an elastic-plastic member: A novel compliance contact model and dynamic response	126-144
Patruno, L. / Ricci, M. / de Miranda, S. / Ubertini, F.	Equivalent Static Wind Loads: Recent developments and analysis of a suspended roof	1-10
Shrestha, Lisa / Bruneau, Michel	Estimating number of simultaneously yielding stories in a shear building subjected to earthquake excitation	552-570
Xiang, Yang / Luo, Yong-feng / Zhu, Zhao-chen / Shen, Zu-Yan	Estimating the response of steel structures subjected to vertical seismic excitation: Idealized model and inelastic displacement ratio	225-238
Ma, Huihuan / Ma, Yueyang / Yu, Zhiwei / Fan, Feng	Experimental and numerical research on gear-bolt joint for free-form grid spatial structures	522-540
Guo, Yan-Lin / Zhou, Peng / Wang, Meng-Zheng / Pi, Yong-Lin / Bradford, Mark Andrew / Tong, Jing-Zhong	Experimental and numerical studies of hysteretic response of triple-truss-confined buckling-restrained braces	157-174
Rashidi, S. / Ziaei-Rad, S.	Experimental and numerical vibration analysis of wire rope isolators under quasi-static and dynamic loadings	328-339
Ouyang, Y. / Kwan, A. K. H. / Lo, S. H. / Ho, J. C. M.	Finite element analysis of concrete-filled steel tube (CFST) columns with circular sections under eccentric load	387-398
Chi, Yin / Yu, Min / Huang, Le / Xu, Lihua	Finite element modeling of steel-polypropylene hybrid fiber reinforced concrete using modified concrete damaged plasticity	23-35
Giordano, Nicola / Crespi, Pietro / Franchi, Alberto	Flexural strength-ductility assessment of unreinforced masonry cross-sections: analytical expressions	399-409
Zhang, Jiao-Long / Vida, Christoffer / Yuan, Yong / Hellmich, Christian / Mang, Herbert A. / Pichler, Bernhard	A hybrid analysis method for displacement-monitored segmented circular tunnel rings	839-856
Chaofeng, Zhang / Youchun, Wei / Longfei, Wang / Meiping, Wu	Hysteretic mechanical property of low-yield strength shear panel dampers in ultra-large plastic strain	11-22
Kun, Chern / Jiang, Lizhong / Chouw, Nawawi	Influence of pounding and skew angle on seismic response of bridges	890-906
Sadeghi, Seyed Nima / Heidarpour, Amin / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	An innovative I-beam to hybrid fabricated column connection: Experimental investigation	907-923
Sun, Xiaoying / Liu, Hao / Su, Ning / Wu, Yue	Investigation on wind tunnel tests of the Kilometer skyscraper	340-356
Portioli, Francesco / Cascini, Lucrezia	Large displacement analysis of dry-jointed masonry structures subjected to settlements using rigid block modelling	485-496
Fu, Qiu Ni / Tan, Kang Hai / Zhou, Xu Hong / Yang, Bo	Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenario	357-372
Xu, Fei / Chen, Ju / Chan, Tak-Ming	Mechanical behaviour of concrete-filled CHS connections subjected to in-plane bending	101-112
Zheng, Mingyan / Yang, Zhaohui (Joey) / Yang, Shihao / Still, Benjamin	Modeling and mitigation of excessive dynamic responses of wind turbines founded in warm permafrost	36-46
Polat, Erkan / Bruneau, Michel	Modeling cyclic inelastic in-plane flexural behavior of concrete filled sandwich steel panel walls	63-80
Peijuan, Zheng / Ming, Wang Chien / Zhouhong, Zong / Liqi, Wang	A new active learning method based on the learning function U of the AK-MCS reliability analysis method	185-194
Zhong, J. T. / Wang, L. / Deng, P. / Zhou, Man	A new evaluation procedure for the strut-and-tie models of the disturbed regions of reinforced concrete structures	660-672
Li, Chao / Hao, Hong / Bi, Kaiming	Numerical study on the seismic performance of precast segmental concrete columns under cyclic loading	373-386
Kvåle, Knut Andreas / Øiseth, Ole / Rønnquist, Anders	Operational modal analysis of an end-supported pontoon bridge	410-423
Savković, Mile M. / Bulatović, Radovan R. / Gašić, Milomir M. / Pavlović, Goran V. / Stepanović, Aleksandar Z.	Optimization of the box section of the main girder of the single-girder bridge crane by applying biologically inspired algorithms	452-465
Gaetani, Angelo / Lourenço, Paulo B. / Monti, Giorgio / Milani, Gabriele	A parametric investigation on the seismic capacity of masonry cross vaults	686-703
Fernández-Ruiz, M. A. / Hernández-Montes, E. / Carbonell-Márquez, J. F. / Gil-Martín, L. M.	Patterns of force:length ratios for the design of compression structures with inner ribs	878-889
Dong, Huihui / Du, Xiuli / Han, Qiang / Hao, Hong / Bi, Kaiming / Wang, Xiaoqiang	Performance of an innovative self-centering buckling restrained brace for mitigating seismic responses of bridge structures with double-column piers	47-62
Xu, Yuwang / Øiseth, Ole / Naess, Arvid / Moan, Torgeir	Prediction of long-term extreme load effects due to wind for cable-supported bridges using time-domain simulations	239-253
Kandler, Georg / Füssl, Josef	A probabilistic approach for the linear behaviour of glued laminated timber	673-685
Carmona, Jorge Eliecer Campuzano / Avila, Suzana Moreira / Doz, Graciela	Proposal of a tuned mass damper with friction damping to control excessive floor vibrations	81-100
Lantsoght, Eva O. L. / van der Veen, Cor / de Boer, Ane / Hordijk, Dick A.	Required proof load magnitude for probabilistic field assessment of viaduct De Beek	767-779
Parunov, Joško / Rudan, Smiljko / Bužančić Primorac, Branka	Residual ultimate strength assessment of double hull oil tanker after collision	704-717
Adibi, Mahdi / Marefat, Mohammad S. / Esmaeily, Asad / Arani, Kamyar Karbasi / Esmaeily, Ali	Seismic retrofit of external concrete beam-column joints reinforced by plain bars using steel angles prestressed by cross ties	813-828
Hasni, Hassene / Alavi, Amir H. / Lajnef, Nizar / Abdelbarr, Mohamed / Masri, Sami F. / Chakrabartty, Shantanu	Self-powered piezo-floating-gate sensors for health monitoring of steel plates	584-601
Qi, Yi / Gu, Qiang / Sun, Guohua / Zhao, Baocheng	Shear force demand on headed stud for the design of composite steel plate shear wall	780-792
Campione, G. / Cannella, F. / Cucchiara, C.	Simplified model for compressive response of RC column footing with square cross-section	936-948
Conde, Borja / Ramos, Luís F. / Oliveira, Daniel V. / Riveiro, Belén / Solla, Mercedes	Structural assessment of masonry arch bridges by combination of non-destructive testing techniques and three-dimensional numerical modelling: Application to Vilanova bridge	621-638
Filippoupolitis, M. / Hopkins, C. / Völtl, R. / Schanda, U. / Mahn, J. / Krajči, L.	Structural dynamics of a dowelled-joist timber floor in the low-frequency range modelled using finite element simulation	602-620
Omrani, Roshanak / Mobasher, Bahareh / Sheikhakbari, Shayan / Zareian, Farzin / Taciroglu, Ertugrul	Variability in the predicted seismic performance of a typical seat-type California bridge due to epistemic uncertainties in its abutment backfill and shear-key models	718-738
Sadeghi, Hossein / Heristchian, Mahmoud / Aziminejad, Armin / Nooshin, Hoshyar	Wind effect on grooved and scallop domes	436-450

About this
data sheet
IssueID
17964
Published on:
04/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - October 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - October 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.