Engineering Structures - octobre 2017

Publié:	octobre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Fedorova, Maria / Sivaselvan, M. V.	An algorithm for dynamic vehicle-track-structure interaction analysis for high-speed trains	857-877
Faridani, Hadi Moghadasi / Capsoni, Antonio	Analysis of passively-damped coupled shear walls using continuum-based models	739-754
Classen, Martin / Hegger, Josef	Assessing the pry-out resistance of open rib shear connectors in cracked concrete – Engineering model with aggregate interlock	254-262
Smith, Shushannah / Wang, Gang / Wu, Dongsheng	Bayesian approach to breathing crack detection in beam structures	829-838
Mangalathu, Sujith / Soleimani, Farahnaz / Jeon, Jong-Su	Bridge classes for regional seismic risk assessment: Improving HAZUS models	755-766
Yu, Xianglin / Deng, Hongzhou / Zhang, Donghong / Cui, Lei	Buckling behavior of 420 MPa HSSY columns: Test investigation and design approach	793-812
Shi, Zhongqi / Dimitrakopoulos, Elias G.	Comparative evaluation of two simulation approaches of deck-abutment pounding in bridges	541-551
Del Vecchio, Ciro / Del Zoppo, Marta / Di Ludovico, Marco / Verderame, Gerardo Mario / Prota, Andrea	Comparison of available shear strength models for non-conforming reinforced concrete columns	312-327
Michiels, Tim / Napolitano, Rebecca / Adriaenssens, Sigrid / Glisic, Branko	Comparison of thrust line analysis, limit state analysis and distinct element modeling to predict the collapse load and collapse mechanism of a rammed earth arch	145-156
Oktavianus, Yusak / Chang, Hongfei / Goldsworthy, Helen M. / Gad, Emad F.	Component model for pull-out behaviour of headed anchored blind bolt within concrete filled circular hollow section	210-224
Wang, Wei / Li, Mingxiao / Chen, Yiyi / Jian, Xiaogang	Cyclic behavior of endplate connections to tubular columns with novel slip-critical blind bolts	949-962
Wang, Jingfeng / Li, Beibei / Wang, Donghua / Zhao, Chunfeng	Cyclic testing of steel beam blind bolted to CFST column composite frames with SBTD concrete slabs	293-311
Ding, Yukun / Zheng, Rui	Cyclic tests for steel frame with unbonded steel plate brace encased in panel	466-484
Downey, Austin / D'Alessandro, Antonella / Baquera, Micah / García-Macías, Enrique / Rolfes, Daniel / Ubertini, Filippo / Laflamme, Simon / Castro-Triguero, Rafael	Damage detection, localization and quantification in conductive smart concrete structures using a resistor mesh model	924-935
Wang, Gaohui / Wang, Yongxiang / Lu, Wenbo / Yu, Mao / Wang, Chao	Deterministic 3D seismic damage analysis of Guandi concrete gravity dam: A case study	263-276
Mahrenholtz, Philipp / Wood, Richard L. / Eligehausen, Rolf / Hutchinson, Tara C. / Hoehler, Matthew S.	Development and validation of European guidelines for seismic qualification of post-installed anchors	497-508
Lengyel, G.	Discrete element analysis of gothic masonry vaults for self-weight and horizontal support displacement	195-209
Lantsoght, Eva O. L. / de Boer, Ane / van der Veen, Cor	Distribution of peak shear stress in finite element models of reinforced concrete slabs	571-583
Refan, Maryam / Hangan, Horia / Wurman, Joshua / Kosiba, Karen	Doppler radar-derived wind field of five tornado events with application to engineering simulations	509-521
Qian, Kai / Li, Bing	Dynamic and residual behavior of reinforced concrete floors following instantaneous removal of a column	175-184
Górski, Piotr	Dynamic characteristic of tall industrial chimney estimated from GPS measurement and frequency domain decomposition	277-292
Hedayati Dezfuli, Farshad / Li, Shuai / Shahria Alam, M. / Wang, Jing-Quan	Effect of constitutive models on the seismic response of an SMA-LRB isolated highway bridge	113-125
Kumar, Manish / Whittaker, Andrew S.	Effect of seismic hazard definition on isolation-system displacements in nuclear power plants	424-435
Yacoubian, Mehair / Lam, Nelson / Lumantarna, Elisa / Wilson, John L.	Effects of podium interference on shear force distributions in tower walls supporting tall buildings	639-659
Ventura, A. / De Biagi, V. / Chiaia, B.	Effects of rockfall on an elastic-plastic member: A novel compliance contact model and dynamic response	126-144
Patruno, L. / Ricci, M. / de Miranda, S. / Ubertini, F.	Equivalent Static Wind Loads: Recent developments and analysis of a suspended roof	1-10
Shrestha, Lisa / Bruneau, Michel	Estimating number of simultaneously yielding stories in a shear building subjected to earthquake excitation	552-570
Xiang, Yang / Luo, Yong-feng / Zhu, Zhao-chen / Shen, Zu-Yan	Estimating the response of steel structures subjected to vertical seismic excitation: Idealized model and inelastic displacement ratio	225-238
Ma, Huihuan / Ma, Yueyang / Yu, Zhiwei / Fan, Feng	Experimental and numerical research on gear-bolt joint for free-form grid spatial structures	522-540
Guo, Yan-Lin / Zhou, Peng / Wang, Meng-Zheng / Pi, Yong-Lin / Bradford, Mark Andrew / Tong, Jing-Zhong	Experimental and numerical studies of hysteretic response of triple-truss-confined buckling-restrained braces	157-174
Rashidi, S. / Ziaei-Rad, S.	Experimental and numerical vibration analysis of wire rope isolators under quasi-static and dynamic loadings	328-339
Ouyang, Y. / Kwan, A. K. H. / Lo, S. H. / Ho, J. C. M.	Finite element analysis of concrete-filled steel tube (CFST) columns with circular sections under eccentric load	387-398
Chi, Yin / Yu, Min / Huang, Le / Xu, Lihua	Finite element modeling of steel-polypropylene hybrid fiber reinforced concrete using modified concrete damaged plasticity	23-35
Giordano, Nicola / Crespi, Pietro / Franchi, Alberto	Flexural strength-ductility assessment of unreinforced masonry cross-sections: analytical expressions	399-409
Zhang, Jiao-Long / Vida, Christoffer / Yuan, Yong / Hellmich, Christian / Mang, Herbert A. / Pichler, Bernhard	A hybrid analysis method for displacement-monitored segmented circular tunnel rings	839-856
Chaofeng, Zhang / Youchun, Wei / Longfei, Wang / Meiping, Wu	Hysteretic mechanical property of low-yield strength shear panel dampers in ultra-large plastic strain	11-22
Kun, Chern / Jiang, Lizhong / Chouw, Nawawi	Influence of pounding and skew angle on seismic response of bridges	890-906
Sadeghi, Seyed Nima / Heidarpour, Amin / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	An innovative I-beam to hybrid fabricated column connection: Experimental investigation	907-923
Sun, Xiaoying / Liu, Hao / Su, Ning / Wu, Yue	Investigation on wind tunnel tests of the Kilometer skyscraper	340-356
Portioli, Francesco / Cascini, Lucrezia	Large displacement analysis of dry-jointed masonry structures subjected to settlements using rigid block modelling	485-496
Fu, Qiu Ni / Tan, Kang Hai / Zhou, Xu Hong / Yang, Bo	Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenario	357-372
Xu, Fei / Chen, Ju / Chan, Tak-Ming	Mechanical behaviour of concrete-filled CHS connections subjected to in-plane bending	101-112
Zheng, Mingyan / Yang, Zhaohui (Joey) / Yang, Shihao / Still, Benjamin	Modeling and mitigation of excessive dynamic responses of wind turbines founded in warm permafrost	36-46
Polat, Erkan / Bruneau, Michel	Modeling cyclic inelastic in-plane flexural behavior of concrete filled sandwich steel panel walls	63-80
Peijuan, Zheng / Ming, Wang Chien / Zhouhong, Zong / Liqi, Wang	A new active learning method based on the learning function U of the AK-MCS reliability analysis method	185-194
Zhong, J. T. / Wang, L. / Deng, P. / Zhou, Man	A new evaluation procedure for the strut-and-tie models of the disturbed regions of reinforced concrete structures	660-672
Li, Chao / Hao, Hong / Bi, Kaiming	Numerical study on the seismic performance of precast segmental concrete columns under cyclic loading	373-386
Kvåle, Knut Andreas / Øiseth, Ole / Rønnquist, Anders	Operational modal analysis of an end-supported pontoon bridge	410-423
Savković, Mile M. / Bulatović, Radovan R. / Gašić, Milomir M. / Pavlović, Goran V. / Stepanović, Aleksandar Z.	Optimization of the box section of the main girder of the single-girder bridge crane by applying biologically inspired algorithms	452-465
Gaetani, Angelo / Lourenço, Paulo B. / Monti, Giorgio / Milani, Gabriele	A parametric investigation on the seismic capacity of masonry cross vaults	686-703
Fernández-Ruiz, M. A. / Hernández-Montes, E. / Carbonell-Márquez, J. F. / Gil-Martín, L. M.	Patterns of force:length ratios for the design of compression structures with inner ribs	878-889
Dong, Huihui / Du, Xiuli / Han, Qiang / Hao, Hong / Bi, Kaiming / Wang, Xiaoqiang	Performance of an innovative self-centering buckling restrained brace for mitigating seismic responses of bridge structures with double-column piers	47-62
Xu, Yuwang / Øiseth, Ole / Naess, Arvid / Moan, Torgeir	Prediction of long-term extreme load effects due to wind for cable-supported bridges using time-domain simulations	239-253
Kandler, Georg / Füssl, Josef	A probabilistic approach for the linear behaviour of glued laminated timber	673-685
Carmona, Jorge Eliecer Campuzano / Avila, Suzana Moreira / Doz, Graciela	Proposal of a tuned mass damper with friction damping to control excessive floor vibrations	81-100
Lantsoght, Eva O. L. / van der Veen, Cor / de Boer, Ane / Hordijk, Dick A.	Required proof load magnitude for probabilistic field assessment of viaduct De Beek	767-779
Parunov, Joško / Rudan, Smiljko / Bužančić Primorac, Branka	Residual ultimate strength assessment of double hull oil tanker after collision	704-717
Adibi, Mahdi / Marefat, Mohammad S. / Esmaeily, Asad / Arani, Kamyar Karbasi / Esmaeily, Ali	Seismic retrofit of external concrete beam-column joints reinforced by plain bars using steel angles prestressed by cross ties	813-828
Hasni, Hassene / Alavi, Amir H. / Lajnef, Nizar / Abdelbarr, Mohamed / Masri, Sami F. / Chakrabartty, Shantanu	Self-powered piezo-floating-gate sensors for health monitoring of steel plates	584-601
Qi, Yi / Gu, Qiang / Sun, Guohua / Zhao, Baocheng	Shear force demand on headed stud for the design of composite steel plate shear wall	780-792
Campione, G. / Cannella, F. / Cucchiara, C.	Simplified model for compressive response of RC column footing with square cross-section	936-948
Conde, Borja / Ramos, Luís F. / Oliveira, Daniel V. / Riveiro, Belén / Solla, Mercedes	Structural assessment of masonry arch bridges by combination of non-destructive testing techniques and three-dimensional numerical modelling: Application to Vilanova bridge	621-638
Filippoupolitis, M. / Hopkins, C. / Völtl, R. / Schanda, U. / Mahn, J. / Krajči, L.	Structural dynamics of a dowelled-joist timber floor in the low-frequency range modelled using finite element simulation	602-620
Omrani, Roshanak / Mobasher, Bahareh / Sheikhakbari, Shayan / Zareian, Farzin / Taciroglu, Ertugrul	Variability in the predicted seismic performance of a typical seat-type California bridge due to epistemic uncertainties in its abutment backfill and shear-key models	718-738
Sadeghi, Hossein / Heristchian, Mahmoud / Aziminejad, Armin / Nooshin, Hoshyar	Wind effect on grooved and scallop domes	436-450

Informations
sur cette fiche
IssueID
17964
Publié(e) le:
04.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - octobre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - octobre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.