Construction and Building Materials - October 2014

Published:	October 2014

Articles in this Issue

Author(s)	Title	Page(s)
Patil, Shilpa / Karkare, Bilavari / Goyal, Shweta	Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element	326-332
Gu, Kai / Jin, Fei / Al-Tabbaa, Abir / Shi, Bin	Activation of ground granulated blast furnace slag by using calcined dolomite	252-258
Ongel, Aybike / Hugener, Martin	Aging of bituminous mixes for rap simulation	49-54
Riggio, Mariapaola / Sandak, Jakub / Sandak, Anna / Pauliny, Dusan / Babiński, Leszek	Analysis and prediction of selected mechanical/dynamic properties of wood after short and long-term waterlogging	444-454
Wang, J. Y. / Snoeck, D. / Van Vlierberghe, S. / Verstraete, W. / De Belie, N.	Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete	110-119
Nogueira, Rita / Pinto, Ana Paula Ferreira / Gomes, Augusto	Assessing mechanical behavior and heterogeneity of low-strength mortars by the drilling resistance method	757-768
Gaedicke, Cristián / Marines, Armando / Miankodila, Farel	Assessing the abrasion resistance of cores in virgin and recycled aggregate pervious concrete	701-708
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Assessment of the influence of Nano-Silica on the behavior of mortar using factorial design of experiments	416-425
Contrafatto, Loredana / Cosenza, Renato	Behaviour of post-installed adhesive anchors in natural stone	355-369
Choi, Eunsoo / Cho, Baik-Soon / Jeon, Jong-Su / Yoon, Soon-Jong	Bond behavior of steel deformed bars embedded in concrete confined by FRP wire jackets	716-725
Tang, S. W. / Li, Z. J. / Shao, H. Y. / Chen, E.	Characterization of early-age hydration process of cement pastes based on impedance measurement	491-500
Saillio, Mickael / Baroghel-Bouny, Véronique / Barberon, Fabien	Chloride binding in sound and carbonated cementitious materials with various types of binder	82-91
Sassoni, Enrico / Mazzotti, Claudio / Pagliai, Giulia	Comparison between experimental methods for evaluating the compressive strength of existing masonry buildings	206-219
Singh, Malkit / Siddique, Rafat	Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand	39-48
Sun, Xiao / Dai, Qingli / Ng, Kenny	Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen	240-251
Eduok, Ubong M. / Khaled, Mazen M.	Corrosion protection of non-alloyed AIAI 316L concrete steel metal grade in aqueous H2SO4: Electroanalytical and surface analyses with Metiamide	285-290
Dondi, Giulio / Tataranni, Piergiorgio / Pettinari, Matteo / Sangiorgi, Cesare / Simone, Andrea / Vignali, Valeria	Crumb Rubber in cold recycled bituminous mixes: Comparison between Traditional Crumb Rubber and Cryogenic Crumb Rubber	370-375
Kulasuriya, Chandana / Vimonsatit, Vanissorn / Dias, WPS / De Silva, P.	Design and development of Alkali Pozzolan Cement (APC)	426-433
Ponikiewski, Tomasz / Katzer, Jacek / Bugdol, Monika / Rudzki, Marcin	Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography	333-340
Modarres, Amir / Hamedi, Hamidreza	Developing laboratory fatigue and resilient modulus models for modified asphalt mixes with waste plastic bottles (PET)	259-267
Ko, HuneBum / Matthys, Stijn / Palmieri, Aniello / Sato, Yuichi	Development of a simplified bond stress–slip model for bonded FRP–concrete interfaces	142-157
Bahurudeen, A. / Marckson, A. V. / Kishore, Arun / Santhanam, Manu	Development of sugarcane bagasse ash based Portland pozzolana cement and evaluation of compatibility with superplasticizers	465-475
Thomson, Andrew / Walker, Pete	Durability characteristics of straw bales in building envelopes	135-141
Liu, Xiaoming / Liu, Weizheng / Wu, Shaopeng / Wang, Cui	Effect of carbon fillers on electrical and road properties of conductive asphalt materials	301-306
Han, Fanghui / Liu, Rengguang / Yan, Peiyu	Effect of fresh water leaching on the microstructure of hardened composite binder pastes	630-636
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Hilbig, Harald	The effect of glass powder on the microstructure of ultra high performance concrete	102-109
Zheng, Yu / Jiang, Zehui / Sun, Zhengjun / Ren, Haiqing	Effect of microwave-assisted curing on bamboo glue strength: Bonded by thermosetting phenolic resin	320-325
Zhang, Henglong / Zhu, Chongzheng / Tan, Bangyao / Shi, Caijun	Effect of organic layered silicate on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen	31-38
Li, L. / Dong, C. F. / Xiao, K. / Yao, J. Z. / Li, X. G.	Effect of pH on pitting corrosion of stainless steel welds in alkaline salt water	709-715
Ma, Hui / Qian, Shunzhi / Zhang, Zhigang	Effect of self-healing on water permeability and mechanical property of Medium-Early-Strength Engineered Cementitious Composites	92-101
Khalil, A. A. / Tawfik, A. / Hegazy, A. A. / El-Shahat, M. F.	Effect of some waste additives on the physical and mechanical properties of gypsum plaster composites	580-586
Shojaei Baghini, Mojtaba / Ismail, Amiruddin / Karim, Mohamed Rehan / Shokri, Foad / Firoozi, Ali Asghar	Effect of styrene–butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive	740-749
Shin, Myoungsu / Gwon, Seong-Woo / Lee, Kihak / Han, Sang Whan / Jo, Yeong Wook	Effectiveness of high performance fiber-reinforced cement composites in slender coupling beams	476-490
Chang, C. C. / Yeih, W. / Chang, J. J. / Huang, R.	Effects of stirrups on electrochemical chloride removal efficiency	692-700
Bragança, Mariana O. G. P. / Portella, Kleber F. / Bonato, Marcelle M. / Marino, Cláudia E. B.	Electrochemical impedance behavior of mortar subjected to a sulfate environment – A comparison with chloride exposure models	650-658
Wang, Wei-Chien / Wang, Her-Yung / Lo, Ming-Hung	The engineering properties of alkali-activated slag pastes exposed to high temperatures	409-415
Ziari, Hasan / Babagoli, Rezvan / Ameri, Mahmoud / Akbari, Ali	Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen	685-691
Yuhong Wang, P. E. / Wen, Yong / Zhao, Kecheng / Chong, Dan / Wong, Alvin S. T.	Evolution and locational variation of asphalt binder aging in long-life hot-mix asphalt pavements	172-182
Çakır, Ö.	Experimental analysis of properties of recycled coarse aggregate (RCA) concrete with mineral additives	17-25
Liu, Ning / Chen, Bing	Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete	227-232
Petkova, Diana / Donchev, Ted / Wen, Jennifer	Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures	55-61
Tan, Yiqiu / Ouyang, Jian / Li, Yunliang	Factors influencing rheological properties of fresh cement asphalt emulsion paste	611-617
Wang, Wei Chien	Feasibility of stabilizing expanding property of furnace slag by autoclave method	552-557
Zhang, Yuge / Pan, Xingyu / Sun, Yifan / Xu, Wei / Pan, Youqiang / Xie, Hongfeng / Cheng, Rongshi	Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders	62-67
Disfani, Mahdi M. / Arulrajah, Arul / Haghighi, Hamed / Mohammadinia, Alireza / Horpibulsuk, Suksun	Flexural beam fatigue strength evaluation of crushed brick as a supplementary material in cement stabilized recycled concrete aggregates	667-676
Ferrara, Liberato / Krelani, Visar / Carsana, Maddalena	A " fracture testing" based approach to assess crack healing of concrete with and without crystalline admixtures	535-551
Jo, Byung-Wan / Chakraborty, Sumit / Yoon, Kwang Won	A hypothetical model based on effectiveness of combined alkali and polymer latex modified jute fibre in controlling the setting and hydration behaviour of cement	1-9
Pan, Pan / Wu, Shaopeng / Xiao, Yue / Wang, Peng / Liu, Xing	Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder	220-226
Agrela, F. / Cabrera, M. / Galvin, A. P. / Barbudo, A. / Ramírez, A.	Influence of the sulphate content of recycled aggregates on the properties of cement-treated granular materials using Sulphate-Resistant Portland Cement	127-134
Libessart, Laurent / Djelal, Chafika / De Caro, Pascale	Influence of the type of release oil on steel formwork corrosion and facing aesthetics	391-401
Toprak, N. Alper / Altun, Okay / Aydogan, Namık / Benzer, Hakan	The influences and selection of grinding chemicals in cement grinding circuits	199-205
Li, Sheng / Liu, Xingwu / Liu, Zhaohui	Interlaminar shear fatigue and damage characteristics of asphalt layer for asphalt overlay on rigid pavement	341-347
Temiz, Hüseyin / Kantarcı, Fatih	Investigation of durability of CEM II B-M mortars and concrete with limestone powder, calcite powder and fly ash	517-524
Demis, S. / Tapali, J. G. / Papadakis, V. G.	An investigation of the effectiveness of the utilization of biomass ashes as pozzolanic materials	291-300
Liu, Kai-Wei / Mukhopadhyay, Anal K.	A kinetic-based ASR aggregate classification system	525-534
Kuity, Ambika / Jayaprakasan, Sandhya / Das, Animesh	Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture	637-643
Ortega-López, Vanesa / Manso, Juan M. / Cuesta, Isidoro I. / Gonzalez, Javier J.	The long-term accelerated expansion of various ladle-furnace basic slags and their soil-stabilization applications	455-464
Zhu, Yu / Zhang, Zhaocai / Yang, Yingzi / Yao, Yan	Measurement and correlation of ductility and compressive strength for engineered cementitious composites (ECC) produced by binary and ternary systems of binder materials: Fly ash, slag, silica fume and cement	192-198
Li, Changming / Zhang, Tingting / Wang, Lijiu	Mechanical properties and microstructure of alkali activated Pisha sandstone geopolymer composites	233-239
Ismail, Sallehan / Ramli, Mahyuddin	Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates	726-739
Qian, Jueshi / You, Chao / Wang, Qingzhen / Wang, Hongtao / Jia, Xingwen	A method for assessing bond performance of cement-based repair materials	307-313
Mouillet, V. / Séjourné, D. / Delmotte, V. / Ritter, H.-J. / Lesueur, D.	Method of quantification of hydrated lime in asphalt mixtures	348-354
Pizzol, V. D. / Mendes, L. M. / Savastano, H. / Frías, M. / Davila, F. J. / Cincotto, M. A. / John, V. M. / Tonoli, G. H. D.	Mineralogical and microstructural changes promoted by accelerated carbonation and ageing cycles of hybrid fiber–cement composites	750-756
D'Alessandro, Francesco / Asdrubali, Francesco / Baldinelli, Giorgio	Multi-parametric characterization of a sustainable lightweight concrete containing polymers derived from electric wires	277-284
Guo, Meng / Tan, Yiqiu / Zhou, Shuiwen	Multiscale test research on interfacial adhesion property of cold mix asphalt	769-776
Torres-Luque, M. / Bastidas-Arteaga, E. / Schoefs, F. / Sanchez-Silva, M. / Osma, J. F.	Non-destructive methods for measuring chloride ingress into concrete: State-of-the-art and future challenges	68-81
Monteiro, Sergio Neves / Vieira, Carlos Maurício Fontes	On the production of fired clay bricks from waste materials: A critical update	599-610
Bastami, Morteza / Baghbadrani, Mazyar / Aslani, Farhad	Performance of nano-Silica modified high strength concrete at elevated temperatures	402-408
Tanyildizi, Harun	Post-fire behavior of structural lightweight concrete designed by Taguchi method	565-571
Zhou, Changjun / Shu, Xiang / Huang, Baoshan	Predicting concrete coefficient of thermal expansion with an improved micromechanical model	10-16
Gonzalez-Corominas, A. / Etxeberria, M.	Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates	618-626
Ahmad, Shamsad / Adekunle, Saheed Kolawole / Maslehuddin, Mohammed / Azad, Abul Kalam	Properties of self-consolidating concrete made utilizing alternative mineral fillers	268-276
Wang, Zhenjun / Gao, Jie / Ai, Tao / Jiang, Wei / Zhao, Peng	Quantitative evaluation of carbon fiber dispersion in cement based composites	26-30
Behera, Monalisa / Bhattacharyya, S. K. / Minocha, A. K. / Deoliya, R. / Maiti, S.	Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review	501-516
Si, Wei / Ma, Biao / Li, Ning / Ren, Jun-ping / Wang, Hai-nian	Reliability-based assessment of deteriorating performance to asphalt pavement under freeze–thaw cycles in cold regions	572-579
Eliche-Quesada, D. / Iglesias-Godino, F. J. / Pérez-Villarejo, L. / Corpas-Iglesias, F. A.	Replacement of the mixing fresh water by wastewater olive oil extraction in the extrusion of ceramic bricks	659-666
Liu, Tao / Zhang, Xiao-ning / Li, Zhi / Chen, Zhou-quan	Research on the homogeneity of asphalt pavement quality using X-ray computed tomography (CT) and fractal theory	587-598
Bal, Bekir Cihad	Some physical and mechanical properties of reinforced laminated veneer lumber	120-126
Yu, R. / Spiesz, P. / Brouwers, H. J. H.	Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): Experiments and modeling	158-171
Yelgin, Ahmet Necati / Özyurt, Muhammet Zeki / Uysal, Mucteba	The structural behaviour of composite beams with prefabricated reinforced concrete plate in positive moment zone	627-629
Sidorova, Anna / Vazquez-Ramonich, Enric / Barra-Bizinotto, Marilda / Roa-Rovira, Joan Josep / Jimenez-Pique, Emilio	Study of the recycled aggregates nature's influence on the aggregate–cement paste interface and ITZ	677-684
Zhai, Yue / Deng, Zichen / Li, Nan / Xu, Rui	Study on compressive mechanical capabilities of concrete after high temperature exposure and thermo-damage constitutive model	777-782
Cui, Peiqiang / Wu, Shaopeng / Xiao, Yue / Zhang, Honghua	Study on the deteriorations of bituminous binder resulted from volatile organic compounds emissions	644-649
Luo, Xin / Xu, Jin-yu / Bai, Er-lei / Li, Weimin	Study on the effect of basalt fiber on the energy absorption characteristics of porous material	384-390
Kong, Xiangming / Shi, Zhihua / Lu, Zichen	Synthesis of novel polymer nano-particles and their interaction with cement	434-443
Arabani, M. / Jamshidi, R. / Sadeghnejad, M.	Using of 2D finite element modeling to predict the glasphalt mixture rutting behavior	183-191
Ducman, V. / Mirtič, B.	Water vapour permeability of lightweight concrete prepared with different types of lightweight aggregates	314-319
Cook, Marllon Daniel / Ley, M. Tyler / Ghaeezadah, Ashkan	A workability test for slip formed concrete pavements	376-383

About this
data sheet
IssueID
22544
Published on:
13/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.