Construction and Building Materials - octobre 2014

Publié:	octobre 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Patil, Shilpa / Karkare, Bilavari / Goyal, Shweta	Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element	326-332
Gu, Kai / Jin, Fei / Al-Tabbaa, Abir / Shi, Bin	Activation of ground granulated blast furnace slag by using calcined dolomite	252-258
Ongel, Aybike / Hugener, Martin	Aging of bituminous mixes for rap simulation	49-54
Riggio, Mariapaola / Sandak, Jakub / Sandak, Anna / Pauliny, Dusan / Babiński, Leszek	Analysis and prediction of selected mechanical/dynamic properties of wood after short and long-term waterlogging	444-454
Wang, J. Y. / Snoeck, D. / Van Vlierberghe, S. / Verstraete, W. / De Belie, N.	Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete	110-119
Nogueira, Rita / Pinto, Ana Paula Ferreira / Gomes, Augusto	Assessing mechanical behavior and heterogeneity of low-strength mortars by the drilling resistance method	757-768
Gaedicke, Cristián / Marines, Armando / Miankodila, Farel	Assessing the abrasion resistance of cores in virgin and recycled aggregate pervious concrete	701-708
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Assessment of the influence of Nano-Silica on the behavior of mortar using factorial design of experiments	416-425
Contrafatto, Loredana / Cosenza, Renato	Behaviour of post-installed adhesive anchors in natural stone	355-369
Choi, Eunsoo / Cho, Baik-Soon / Jeon, Jong-Su / Yoon, Soon-Jong	Bond behavior of steel deformed bars embedded in concrete confined by FRP wire jackets	716-725
Tang, S. W. / Li, Z. J. / Shao, H. Y. / Chen, E.	Characterization of early-age hydration process of cement pastes based on impedance measurement	491-500
Saillio, Mickael / Baroghel-Bouny, Véronique / Barberon, Fabien	Chloride binding in sound and carbonated cementitious materials with various types of binder	82-91
Sassoni, Enrico / Mazzotti, Claudio / Pagliai, Giulia	Comparison between experimental methods for evaluating the compressive strength of existing masonry buildings	206-219
Singh, Malkit / Siddique, Rafat	Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand	39-48
Sun, Xiao / Dai, Qingli / Ng, Kenny	Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen	240-251
Eduok, Ubong M. / Khaled, Mazen M.	Corrosion protection of non-alloyed AIAI 316L concrete steel metal grade in aqueous H2SO4: Electroanalytical and surface analyses with Metiamide	285-290
Dondi, Giulio / Tataranni, Piergiorgio / Pettinari, Matteo / Sangiorgi, Cesare / Simone, Andrea / Vignali, Valeria	Crumb Rubber in cold recycled bituminous mixes: Comparison between Traditional Crumb Rubber and Cryogenic Crumb Rubber	370-375
Kulasuriya, Chandana / Vimonsatit, Vanissorn / Dias, WPS / De Silva, P.	Design and development of Alkali Pozzolan Cement (APC)	426-433
Ponikiewski, Tomasz / Katzer, Jacek / Bugdol, Monika / Rudzki, Marcin	Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography	333-340
Modarres, Amir / Hamedi, Hamidreza	Developing laboratory fatigue and resilient modulus models for modified asphalt mixes with waste plastic bottles (PET)	259-267
Ko, HuneBum / Matthys, Stijn / Palmieri, Aniello / Sato, Yuichi	Development of a simplified bond stress–slip model for bonded FRP–concrete interfaces	142-157
Bahurudeen, A. / Marckson, A. V. / Kishore, Arun / Santhanam, Manu	Development of sugarcane bagasse ash based Portland pozzolana cement and evaluation of compatibility with superplasticizers	465-475
Thomson, Andrew / Walker, Pete	Durability characteristics of straw bales in building envelopes	135-141
Liu, Xiaoming / Liu, Weizheng / Wu, Shaopeng / Wang, Cui	Effect of carbon fillers on electrical and road properties of conductive asphalt materials	301-306
Han, Fanghui / Liu, Rengguang / Yan, Peiyu	Effect of fresh water leaching on the microstructure of hardened composite binder pastes	630-636
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Hilbig, Harald	The effect of glass powder on the microstructure of ultra high performance concrete	102-109
Zheng, Yu / Jiang, Zehui / Sun, Zhengjun / Ren, Haiqing	Effect of microwave-assisted curing on bamboo glue strength: Bonded by thermosetting phenolic resin	320-325
Zhang, Henglong / Zhu, Chongzheng / Tan, Bangyao / Shi, Caijun	Effect of organic layered silicate on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen	31-38
Li, L. / Dong, C. F. / Xiao, K. / Yao, J. Z. / Li, X. G.	Effect of pH on pitting corrosion of stainless steel welds in alkaline salt water	709-715
Ma, Hui / Qian, Shunzhi / Zhang, Zhigang	Effect of self-healing on water permeability and mechanical property of Medium-Early-Strength Engineered Cementitious Composites	92-101
Khalil, A. A. / Tawfik, A. / Hegazy, A. A. / El-Shahat, M. F.	Effect of some waste additives on the physical and mechanical properties of gypsum plaster composites	580-586
Shojaei Baghini, Mojtaba / Ismail, Amiruddin / Karim, Mohamed Rehan / Shokri, Foad / Firoozi, Ali Asghar	Effect of styrene–butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive	740-749
Shin, Myoungsu / Gwon, Seong-Woo / Lee, Kihak / Han, Sang Whan / Jo, Yeong Wook	Effectiveness of high performance fiber-reinforced cement composites in slender coupling beams	476-490
Chang, C. C. / Yeih, W. / Chang, J. J. / Huang, R.	Effects of stirrups on electrochemical chloride removal efficiency	692-700
Bragança, Mariana O. G. P. / Portella, Kleber F. / Bonato, Marcelle M. / Marino, Cláudia E. B.	Electrochemical impedance behavior of mortar subjected to a sulfate environment – A comparison with chloride exposure models	650-658
Wang, Wei-Chien / Wang, Her-Yung / Lo, Ming-Hung	The engineering properties of alkali-activated slag pastes exposed to high temperatures	409-415
Ziari, Hasan / Babagoli, Rezvan / Ameri, Mahmoud / Akbari, Ali	Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen	685-691
Yuhong Wang, P. E. / Wen, Yong / Zhao, Kecheng / Chong, Dan / Wong, Alvin S. T.	Evolution and locational variation of asphalt binder aging in long-life hot-mix asphalt pavements	172-182
Çakır, Ö.	Experimental analysis of properties of recycled coarse aggregate (RCA) concrete with mineral additives	17-25
Liu, Ning / Chen, Bing	Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete	227-232
Petkova, Diana / Donchev, Ted / Wen, Jennifer	Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures	55-61
Tan, Yiqiu / Ouyang, Jian / Li, Yunliang	Factors influencing rheological properties of fresh cement asphalt emulsion paste	611-617
Wang, Wei Chien	Feasibility of stabilizing expanding property of furnace slag by autoclave method	552-557
Zhang, Yuge / Pan, Xingyu / Sun, Yifan / Xu, Wei / Pan, Youqiang / Xie, Hongfeng / Cheng, Rongshi	Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders	62-67
Disfani, Mahdi M. / Arulrajah, Arul / Haghighi, Hamed / Mohammadinia, Alireza / Horpibulsuk, Suksun	Flexural beam fatigue strength evaluation of crushed brick as a supplementary material in cement stabilized recycled concrete aggregates	667-676
Ferrara, Liberato / Krelani, Visar / Carsana, Maddalena	A " fracture testing" based approach to assess crack healing of concrete with and without crystalline admixtures	535-551
Jo, Byung-Wan / Chakraborty, Sumit / Yoon, Kwang Won	A hypothetical model based on effectiveness of combined alkali and polymer latex modified jute fibre in controlling the setting and hydration behaviour of cement	1-9
Pan, Pan / Wu, Shaopeng / Xiao, Yue / Wang, Peng / Liu, Xing	Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder	220-226
Agrela, F. / Cabrera, M. / Galvin, A. P. / Barbudo, A. / Ramírez, A.	Influence of the sulphate content of recycled aggregates on the properties of cement-treated granular materials using Sulphate-Resistant Portland Cement	127-134
Libessart, Laurent / Djelal, Chafika / De Caro, Pascale	Influence of the type of release oil on steel formwork corrosion and facing aesthetics	391-401
Toprak, N. Alper / Altun, Okay / Aydogan, Namık / Benzer, Hakan	The influences and selection of grinding chemicals in cement grinding circuits	199-205
Li, Sheng / Liu, Xingwu / Liu, Zhaohui	Interlaminar shear fatigue and damage characteristics of asphalt layer for asphalt overlay on rigid pavement	341-347
Temiz, Hüseyin / Kantarcı, Fatih	Investigation of durability of CEM II B-M mortars and concrete with limestone powder, calcite powder and fly ash	517-524
Demis, S. / Tapali, J. G. / Papadakis, V. G.	An investigation of the effectiveness of the utilization of biomass ashes as pozzolanic materials	291-300
Liu, Kai-Wei / Mukhopadhyay, Anal K.	A kinetic-based ASR aggregate classification system	525-534
Kuity, Ambika / Jayaprakasan, Sandhya / Das, Animesh	Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture	637-643
Ortega-López, Vanesa / Manso, Juan M. / Cuesta, Isidoro I. / Gonzalez, Javier J.	The long-term accelerated expansion of various ladle-furnace basic slags and their soil-stabilization applications	455-464
Zhu, Yu / Zhang, Zhaocai / Yang, Yingzi / Yao, Yan	Measurement and correlation of ductility and compressive strength for engineered cementitious composites (ECC) produced by binary and ternary systems of binder materials: Fly ash, slag, silica fume and cement	192-198
Li, Changming / Zhang, Tingting / Wang, Lijiu	Mechanical properties and microstructure of alkali activated Pisha sandstone geopolymer composites	233-239
Ismail, Sallehan / Ramli, Mahyuddin	Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates	726-739
Qian, Jueshi / You, Chao / Wang, Qingzhen / Wang, Hongtao / Jia, Xingwen	A method for assessing bond performance of cement-based repair materials	307-313
Mouillet, V. / Séjourné, D. / Delmotte, V. / Ritter, H.-J. / Lesueur, D.	Method of quantification of hydrated lime in asphalt mixtures	348-354
Pizzol, V. D. / Mendes, L. M. / Savastano, H. / Frías, M. / Davila, F. J. / Cincotto, M. A. / John, V. M. / Tonoli, G. H. D.	Mineralogical and microstructural changes promoted by accelerated carbonation and ageing cycles of hybrid fiber–cement composites	750-756
D'Alessandro, Francesco / Asdrubali, Francesco / Baldinelli, Giorgio	Multi-parametric characterization of a sustainable lightweight concrete containing polymers derived from electric wires	277-284
Guo, Meng / Tan, Yiqiu / Zhou, Shuiwen	Multiscale test research on interfacial adhesion property of cold mix asphalt	769-776
Torres-Luque, M. / Bastidas-Arteaga, E. / Schoefs, F. / Sanchez-Silva, M. / Osma, J. F.	Non-destructive methods for measuring chloride ingress into concrete: State-of-the-art and future challenges	68-81
Monteiro, Sergio Neves / Vieira, Carlos Maurício Fontes	On the production of fired clay bricks from waste materials: A critical update	599-610
Bastami, Morteza / Baghbadrani, Mazyar / Aslani, Farhad	Performance of nano-Silica modified high strength concrete at elevated temperatures	402-408
Tanyildizi, Harun	Post-fire behavior of structural lightweight concrete designed by Taguchi method	565-571
Zhou, Changjun / Shu, Xiang / Huang, Baoshan	Predicting concrete coefficient of thermal expansion with an improved micromechanical model	10-16
Gonzalez-Corominas, A. / Etxeberria, M.	Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates	618-626
Ahmad, Shamsad / Adekunle, Saheed Kolawole / Maslehuddin, Mohammed / Azad, Abul Kalam	Properties of self-consolidating concrete made utilizing alternative mineral fillers	268-276
Wang, Zhenjun / Gao, Jie / Ai, Tao / Jiang, Wei / Zhao, Peng	Quantitative evaluation of carbon fiber dispersion in cement based composites	26-30
Behera, Monalisa / Bhattacharyya, S. K. / Minocha, A. K. / Deoliya, R. / Maiti, S.	Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review	501-516
Si, Wei / Ma, Biao / Li, Ning / Ren, Jun-ping / Wang, Hai-nian	Reliability-based assessment of deteriorating performance to asphalt pavement under freeze–thaw cycles in cold regions	572-579
Eliche-Quesada, D. / Iglesias-Godino, F. J. / Pérez-Villarejo, L. / Corpas-Iglesias, F. A.	Replacement of the mixing fresh water by wastewater olive oil extraction in the extrusion of ceramic bricks	659-666
Liu, Tao / Zhang, Xiao-ning / Li, Zhi / Chen, Zhou-quan	Research on the homogeneity of asphalt pavement quality using X-ray computed tomography (CT) and fractal theory	587-598
Bal, Bekir Cihad	Some physical and mechanical properties of reinforced laminated veneer lumber	120-126
Yu, R. / Spiesz, P. / Brouwers, H. J. H.	Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): Experiments and modeling	158-171
Yelgin, Ahmet Necati / Özyurt, Muhammet Zeki / Uysal, Mucteba	The structural behaviour of composite beams with prefabricated reinforced concrete plate in positive moment zone	627-629
Sidorova, Anna / Vazquez-Ramonich, Enric / Barra-Bizinotto, Marilda / Roa-Rovira, Joan Josep / Jimenez-Pique, Emilio	Study of the recycled aggregates nature's influence on the aggregate–cement paste interface and ITZ	677-684
Zhai, Yue / Deng, Zichen / Li, Nan / Xu, Rui	Study on compressive mechanical capabilities of concrete after high temperature exposure and thermo-damage constitutive model	777-782
Cui, Peiqiang / Wu, Shaopeng / Xiao, Yue / Zhang, Honghua	Study on the deteriorations of bituminous binder resulted from volatile organic compounds emissions	644-649
Luo, Xin / Xu, Jin-yu / Bai, Er-lei / Li, Weimin	Study on the effect of basalt fiber on the energy absorption characteristics of porous material	384-390
Kong, Xiangming / Shi, Zhihua / Lu, Zichen	Synthesis of novel polymer nano-particles and their interaction with cement	434-443
Arabani, M. / Jamshidi, R. / Sadeghnejad, M.	Using of 2D finite element modeling to predict the glasphalt mixture rutting behavior	183-191
Ducman, V. / Mirtič, B.	Water vapour permeability of lightweight concrete prepared with different types of lightweight aggregates	314-319
Cook, Marllon Daniel / Ley, M. Tyler / Ghaeezadah, Ashkan	A workability test for slip formed concrete pavements	376-383

Informations
sur cette fiche
IssueID
22544
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.