Partially Replacing Fly Ash with Limestone Powder in the Paste - Influence and Characterization

Paste filling is an important research direction of coalmine “green mining” which can dispose coalmines solid waste and achieve environmental protection. The mechanical properties such as compressive strength, workability, ultimate tension value, shear strength and splitting strength of paste, in which the fly ash was partially replaced by limestone powder, was studied. Adiabatic temperature rise, setting time, shear strength, permeability, frost resistance and dry shrinkage of different substitution rate were investigated and the results were compared with traditional paste. The test results showed that the influence of limestone powder on workability, permeability and frost resistance performance of paste was slight, the setting time of paste were shortened, adiabatic temperature rise and mechanics performance of paste were decreased, dry shrinkage value was increased with limestone powder content increasing.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.