• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Partially Replacing Fly Ash with Limestone Powder in the Paste - Influence and Characterization

Auteur(s):

Médium: article de revue
Langue(s): en 
Publié dans: The Open Construction and Building Technology Journal, , n. 1, v. 9
Page(s): 21-26
DOI: 10.2174/1874836801509010021
Abstrait:

Paste filling is an important research direction of coalmine “green mining” which can dispose coalmines solid waste and achieve environmental protection. The mechanical properties such as compressive strength, workability, ultimate tension value, shear strength and splitting strength of paste, in which the fly ash was partially replaced by limestone powder, was studied. Adiabatic temperature rise, setting time, shear strength, permeability, frost resistance and dry shrinkage of different substitution rate were investigated and the results were compared with traditional paste. The test results showed that the influence of limestone powder on workability, permeability and frost resistance performance of paste was slight, the setting time of paste were shortened, adiabatic temperature rise and mechanics performance of paste were decreased, dry shrinkage value was increased with limestone powder content increasing.

Copyright: © 2015 Lv Wenyu, Zhang Zhihui
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10381424
  • Publié(e) le:
    22.11.2019
  • Modifié(e) le:
    22.11.2019