Partially Replacing Fly Ash with Limestone Powder in the Paste - Influence and Characterization
Autor(en): |
Lv Wenyu
Zhang Zhihui |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | The Open Construction and Building Technology Journal, Dezember 2015, n. 1, v. 9 |
Seite(n): | 21-26 |
DOI: | 10.2174/1874836801509010021 |
Abstrakt: |
Paste filling is an important research direction of coalmine “green mining” which can dispose coalmines solid waste and achieve environmental protection. The mechanical properties such as compressive strength, workability, ultimate tension value, shear strength and splitting strength of paste, in which the fly ash was partially replaced by limestone powder, was studied. Adiabatic temperature rise, setting time, shear strength, permeability, frost resistance and dry shrinkage of different substitution rate were investigated and the results were compared with traditional paste. The test results showed that the influence of limestone powder on workability, permeability and frost resistance performance of paste was slight, the setting time of paste were shortened, adiabatic temperature rise and mechanics performance of paste were decreased, dry shrinkage value was increased with limestone powder content increasing. |
Copyright: | © 2015 Lv Wenyu, Zhang Zhihui |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
0.64 MB
- Über diese
Datenseite - Reference-ID
10381424 - Veröffentlicht am:
22.11.2019 - Geändert am:
02.06.2021