Lin Yang 
- (2024): Numerical study on parametric correlations and regional applicability of a cross-flow indirect evaporative cooler. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Mechanical properties and corrosion mechanism of steel fiber reinforced concrete (SFRC) subjected to stray current. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Long-term mechanical properties of steel fiber reinforced concrete under sulfuric acid attack. In: Tunnelling and Underground Space Technology, v. 153 (November 2024).
- (2024): Internal superhydrophobic marine concrete: Interface modification based on slag microstructure regulation. In: Journal of Building Engineering, v. 86 (June 2024).
- (2024): Preference of curing regimes based on fire resistance of ultra-high performance cementitious materials (UHPCM) mixed with fly ash. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. In: Construction and Building Materials, v. 399 (October 2023).
- (2024): Long-Term Performance of Sulphoaluminate Cement Blended with Different Contents of Limestone. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2023): Performance of steel fiber reinforced concrete mixed with chloride solution and exposed to high humidity environment. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Interlaminar Shear Property and Strength Prediction Model for Hybrid Fiber-Reinforced Polymer Bar after Exposure to Simulated Concrete Environments. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2023): Platform for isogeometric analysis of complex hydraulic structures. In: Automation in Construction, v. 152 (August 2023).
- (2023): Mechanical properties of seawater-mixed steel fiber reinforced concrete. In: Journal of Building Engineering, v. 73 (August 2023).
- (2022): Organization Synchronization in Response to Complex Project Delays: Network-Based Analysis. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Multiphysical damage characteristics of concrete exposed to external sulfate attack: Elucidating effect of drying–wetting cycles. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Low carbon and high efficiency limestone-calcined clay as supplementary cementitious materials (SCMs): Multi-indicator comparison with conventional SCMs. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): Mechanical properties of recycled fine aggregate concrete incorporating different types of fibers. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): Perceptual response and cognitive performance during exposure to extremely cold environments. In: Energy and Buildings, v. 251 (November 2021).
- (2021): Microstructural characterization of 3D printed concrete. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Physiological and perceptual responses of exposure to different altitudes in extremely cold environment. In: Energy and Buildings, v. 242 (July 2021).
- (2021): Influence of Coverage of Fin-shaped Rods on Flow-induced Vibration and Power Extraction of Cylinder-based Wind Energy Harvester. In: Smart Materials and Structures, v. 30, n. 6 (April 2021).
- (2021): Influence of a novel hydrophobic agent on freeze–thaw resistance and microstructure of concrete. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Influence of dry-wet ratio on properties and microstructure of concrete under sulfate attack. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Performance improvement of aeroelastic energy harvesters with two symmetrical fin-shaped rods. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 196 (January 2020).
- (2018): Numerical simulation of the effect of cement particle shapes on capillary pore structures in hardened cement pastes. In: Construction and Building Materials, v. 173 (June 2018).
- (2019): Multi-objective optimization for designing of high-speed train cabin ventilation system using particle swarm optimization and multi-fidelity Kriging. In: Building and Environment, v. 155 (May 2019).
- (2018): Modelling of evaporation of cough droplets in inhomogeneous humidity fields using the multi-component Eulerian-Lagrangian approach. In: Building and Environment, v. 128 (January 2018).
- (2019): Properties and hydration behavior of Ti-extracted residues-red gypsum based cementitious materials. In: Construction and Building Materials, v. 218 (September 2019).
- (2019): Output performance simulation and contact analysis of traveling wave rotary ultrasonic motor based on ADINA. In: Computers & Structures, v. 216 (May 2019).
- (2015): Material characteristics of ancient Chinese lime binder and experimental reproductions with organic admixtures. In: Construction and Building Materials, v. 84 (June 2015).
- (2017): Modelling of diffusion behavior of ions in low-density and high-density calcium silicate hydrate. In: Construction and Building Materials, v. 155 (November 2017).
- (2018): Numerical modelling of elastic modulus and diffusion coefficient of concrete as a three-phase composite material. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
