Lin Yang 
- : Dynamic modelling and mechanical analysis of an inertial linear piezoelectric actuator with double stators. In: Smart Materials and Structures.
- (2024): Crack characteristic and fractal analysis of SFRC shear wall with CFST columns under repeated low cycle load. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): The Effect of Chloride Content on Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 8 (August 2024).
- (2024): A coupled hygro-thermal model for the performance evolution of mineral admixture concrete subjected to variable environmental conditions. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Bond behaviour between steel fibre and cement mortar exposed to elevated temperature. In: Magazine of Concrete Research, v. 76, n. 17 (September 2024).
- (2024): Effect of fly ash content on the performance of hardened cement-based materials suffered from high temperatures. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Chloride binding behavior of calcium silicate hydrates and Friedel's salt of pastes. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Development of a hydrophobic cement mortar with controllable strength: Preparation and micro-mechanism analysis. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Cascading Failure Analysis of Causal Factors for Construction Collapse Accidents Based on Network Theory. In: Journal of Construction Engineering and Management, v. 150, n. 2 (Februar 2024).
- (2023): Deep removal of phosphate impurities in phosphogypsum by two-step crystal transformation for use as Portland cement retarder. In: Journal of Building Engineering, v. 79 (November 2023).
- : A domain model for geometric modeling in support of the automated BIM modeling. In: Engineering, Construction and Architectural Management.
- (2024): Coping with abnormal organizational behaviors in complex project based on network attack theory. In: Engineering, Construction and Architectural Management, v. 31, n. 9 (10 September 2024).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. In: Journal of Building Engineering, v. 70 (Juli 2023).
- (2023): Durability of graphene-modified epoxy vinyl resin served as matrix phase of composite bar in simulated concrete environment. In: Journal of Building Engineering, v. 68 (Juni 2023).
- (2023): Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (Februar 2023).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2022): Bond properties between concrete and high ductility cementitious composite with totally recycled fine aggregate. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Effect of Curing Temperature on the Hydration of Calcium Sulfoaluminate Cement-Ground Granulated Blast Furnace Slag-Gypsum Mixture. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 6 (Juni 2022).
- (2023): Complex network-based research on organization collaboration and cooperation governance responding to COVID-19. In: Engineering, Construction and Architectural Management, v. 30, n. 8 (Januar 2023).
- (2021): Effect of dry–wet ratio on sulfate transport-reaction mechanism in concrete. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Effect of calcium sulfoaluminate and MgO expansive agent on the mechanical strength and crack resistance of concrete. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Effect of dry–wet ratio on pore-structure characteristics of fly ash concrete under sulfate attack. In: Materials and Structures, v. 54, n. 3 (16 April 2021).
- (2019): Delay-Dependent Robust Stability Analysis for Premium-Reserve Models in an Arbitrary Regime Switching Discrete-Time Framework. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 5, n. 2 (Juni 2019).
- (2021): Diverse angle-length-width model for 3D/4D/5D steel fiber reinforced concrete under tension. In: Construction and Building Materials, v. 266 (Januar 2021).
- (2020): Design and experimental performance of an off-grid ice storage system driven by distributed wind energy. In: Energy and Buildings, v. 224 (Oktober 2020).
- (2020): Bond strength and prediction model for deformed bar embedded in hybrid fiber reinforced recycled aggregate concrete. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2020): Bond stress distribution analysis between steel bar and steel fiber reinforced concrete using midpoint stress interpolation method. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): A comparable study on the deterioration of limestone powder blended cement under sodium sulfate and magnesium sulfate attack at a low temperature. In: Construction and Building Materials, v. 243 (Mai 2020).
- (2019): Effect of ground granulated blast furnace slag on the properties of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (1994): Design of Prestressed Hollow Core Slabs with Reference to Web Shear Failure. In: Journal of Structural Engineering (ASCE), v. 120, n. 9 (September 1994).
Structurae kooperiert mit
