Lin Yang 
- (2024): Influence of phosphorus tailings fineness on the hydration process and physical properties of ordinary Portland cement. In: Construction and Building Materials, v. 417 (Februar 2024).
- (2024): Numerical study on parametric correlations and regional applicability of a cross-flow indirect evaporative cooler. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Mechanical properties and corrosion mechanism of steel fiber reinforced concrete (SFRC) subjected to stray current. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Long-term mechanical properties of steel fiber reinforced concrete under sulfuric acid attack. In: Tunnelling and Underground Space Technology, v. 153 (November 2024).
- (2024): Internal superhydrophobic marine concrete: Interface modification based on slag microstructure regulation. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2024): Long-Term Performance of Sulphoaluminate Cement Blended with Different Contents of Limestone. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Interlaminar Shear Property and Strength Prediction Model for Hybrid Fiber-Reinforced Polymer Bar after Exposure to Simulated Concrete Environments. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2023): Mechanical properties of seawater-mixed steel fiber reinforced concrete. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate. In: Advances in Structural Engineering, v. 26, n. 6 (Januar 2023).
- (2023): Flexural behavior of seawater-mixed steel fiber reinforced concrete exposed to simulated marine environments. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): Flexural Behavior of Graphite Tailings RC Beams in Chloride Environment. In: Advances in Civil Engineering, v. 2023 (Februar 2023).
- (2022): Organization Synchronization in Response to Complex Project Delays: Network-Based Analysis. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Multiphysical damage characteristics of concrete exposed to external sulfate attack: Elucidating effect of drying–wetting cycles. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Low carbon and high efficiency limestone-calcined clay as supplementary cementitious materials (SCMs): Multi-indicator comparison with conventional SCMs. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2021): Mechanical properties of recycled fine aggregate concrete incorporating different types of fibers. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): Perceptual response and cognitive performance during exposure to extremely cold environments. In: Energy and Buildings, v. 251 (November 2021).
- (2021): Microstructural characterization of 3D printed concrete. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Influence of Coverage of Fin-shaped Rods on Flow-induced Vibration and Power Extraction of Cylinder-based Wind Energy Harvester. In: Smart Materials and Structures, v. 30, n. 6 (April 2021).
- (2021): Influence of a novel hydrophobic agent on freeze–thaw resistance and microstructure of concrete. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2020): Influence of dry-wet ratio on properties and microstructure of concrete under sulfate attack. In: Construction and Building Materials, v. 263 (Dezember 2020).
- (2020): Performance improvement of aeroelastic energy harvesters with two symmetrical fin-shaped rods. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 196 (Januar 2020).
- (2018): Numerical simulation of the effect of cement particle shapes on capillary pore structures in hardened cement pastes. In: Construction and Building Materials, v. 173 (Juni 2018).
- (2019): Multi-objective optimization for designing of high-speed train cabin ventilation system using particle swarm optimization and multi-fidelity Kriging. In: Building and Environment, v. 155 (Mai 2019).
- (2018): Modelling of evaporation of cough droplets in inhomogeneous humidity fields using the multi-component Eulerian-Lagrangian approach. In: Building and Environment, v. 128 (Januar 2018).
- (2019): Output performance simulation and contact analysis of traveling wave rotary ultrasonic motor based on ADINA. In: Computers & Structures, v. 216 (Mai 2019).
- (2015): Material characteristics of ancient Chinese lime binder and experimental reproductions with organic admixtures. In: Construction and Building Materials, v. 84 (Juni 2015).
- (2017): Modelling of diffusion behavior of ions in low-density and high-density calcium silicate hydrate. In: Construction and Building Materials, v. 155 (November 2017).
- (2018): In situ monitoring the deterioration processes of hardened cement pastes and mortars exposed to continuous heating. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2018): Numerical modelling of elastic modulus and diffusion coefficient of concrete as a three-phase composite material. In: Construction and Building Materials, v. 189 (November 2018).
Structurae kooperiert mit
