Lin Yang 
- (2024): Internal superhydrophobic marine concrete: Interface modification based on slag microstructure regulation. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Engineered cementitious composites using blended limestone calcined clay and fly ash: Mechanical properties and drying shrinkage modeling. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: Experimental study and microscopic mechanism analysis. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2024): Long-Term Performance of Sulphoaluminate Cement Blended with Different Contents of Limestone. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Evolution and Prediction of Tensile Properties for Ductile Hybrid FRP Bars in a Simulated Concrete Environment. In: Journal of Composites for Construction, v. 27, n. 4 (August 2023).
- (2023): Interlaminar Shear Property and Strength Prediction Model for Hybrid Fiber-Reinforced Polymer Bar after Exposure to Simulated Concrete Environments. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2023): Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete. In: Structures, v. 51 (Mai 2023).
- (2023): Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate. In: Advances in Structural Engineering, v. 26, n. 6 (Januar 2023).
- (2023): Flexural behavior of seawater-mixed steel fiber reinforced concrete exposed to simulated marine environments. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): Flexural Behavior of Graphite Tailings RC Beams in Chloride Environment. In: Advances in Civil Engineering, v. 2023 (Februar 2023).
- (2023): Evaluation method of shear toughness for steel fiber‐reinforced concrete containing recycled coarse aggregate. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Effects of a novel hydrophobic admixture on the sulfate attack resistance of the mortar in the wet-dry cycling environment. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Effects of steel fibers and concrete strength on flexural toughness of ultra-high performance concrete with coarse aggregate. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Low carbon and high efficiency limestone-calcined clay as supplementary cementitious materials (SCMs): Multi-indicator comparison with conventional SCMs. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2022): Flexural behavior and a new model for flexural design of concrete beams hybridly reinforced by continuous FRP bars and discrete steel fibers. In: Structures, v. 38 (April 2022).
- (2022): Energy-Efficient Rail Transit Vertical Alignment Optimization: Gaussian Pseudospectral Method. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 1 (Januar 2022).
- (2022): An experimental investigation on the impermeability and durability of concrete with a novel and multifunctional hydrophobic admixture addition. In: Structural Concrete, v. 23, n. 2 (April 2022).
- (2021): Influence of Coverage of Fin-shaped Rods on Flow-induced Vibration and Power Extraction of Cylinder-based Wind Energy Harvester. In: Smart Materials and Structures, v. 30, n. 6 (April 2021).
- (2021): Experimental investigation on chloride-ion penetration resistance of slag containing fiber-reinforced concrete under drying-wetting cycles. In: Construction and Building Materials, v. 274 (März 2021).
- (2021): Experimental study on water absorption of unsaturated concrete: w/c ratio, coarse aggregate and saturation degree. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2021): Influence of a novel hydrophobic agent on freeze–thaw resistance and microstructure of concrete. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2020): Effects of installation position of fin-shaped rods on wind-induced vibration and energy harvesting of aeroelastic energy converter. In: Smart Materials and Structures, v. 30, n. 2 (Dezember 2020).
- (2016): Evaluation of manikin simplification methods for CFD simulations in occupied indoor environments. In: Energy and Buildings, v. 127 (September 2016).
- (2020): Influence of dry-wet ratio on properties and microstructure of concrete under sulfate attack. In: Construction and Building Materials, v. 263 (Dezember 2020).
- (2020): Evaluation of cough-jet effects on the transport characteristics of respiratory-induced contaminants in airline passengers’ local environments. In: Building and Environment, v. 183 (Oktober 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. In: Magazine of Concrete Research, v. 72, n. 3 (Februar 2020).
- (2017): Empirical Study of BIM Implementation–Based Perceptions among Chinese Practitioners. In: Journal of Management in Engineering (ASCE), v. 33, n. 5 (September 2017).
- (2019): Experimental investigation on flexural behavior of hybrid fibers reinforced recycled brick aggregates concrete. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2018): In situ monitoring the deterioration processes of hardened cement pastes and mortars exposed to continuous heating. In: Construction and Building Materials, v. 192 (Dezember 2018).
Structurae kooperiert mit
