Lin Yang 
- (2024): Experimental and ReaxFF MD study on Cr10Mo steel passivation in simulated concrete pore solutions. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Effect of ultra-fine supplementary cementitious materials on the properties of calcium sulfoaluminate cement-based ultra-high performance concrete. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Enhancing cement mortar hydrophobicity against dry-wet cycling sulfate attack using stearic acid modified mica powder via high-temperature stirring. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Experimental study on freeze-thaw resistance of mortar: An attempt to modify hydrophobic materials with hydrophobic nano-silica. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Engineered cementitious composites using blended limestone calcined clay and fly ash: Mechanical properties and drying shrinkage modeling. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Effects of the stearic acid modified mica powder on hydrophobic properties and salt freezing resistance of mortar: Experimental study and microscopic mechanism analysis. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Effects and interactions of scouring abrasion and external sulfate attack on deterioration of lining concrete: Experiments and preliminary modeling. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Evolution and Prediction of Tensile Properties for Ductile Hybrid FRP Bars in a Simulated Concrete Environment. In: Journal of Composites for Construction, v. 27, n. 4 (August 2023).
- (2023): Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete. In: Structures, v. 51 (May 2023).
- (2023): Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate. In: Advances in Structural Engineering, v. 26, n. 6 (January 2023).
- (2023): Flexural behavior of seawater-mixed steel fiber reinforced concrete exposed to simulated marine environments. In: Construction and Building Materials, v. 373 (April 2023).
- (2023): Flexural Behavior of Graphite Tailings RC Beams in Chloride Environment. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Effect of thermal fatigue on mechanical properties and microstructure of concrete in constant ambient humidity. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Evaluation method of shear toughness for steel fiber‐reinforced concrete containing recycled coarse aggregate. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Effects of a novel hydrophobic admixture on the sulfate attack resistance of the mortar in the wet-dry cycling environment. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Effects of steel fibers and concrete strength on flexural toughness of ultra-high performance concrete with coarse aggregate. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Flexural behavior and a new model for flexural design of concrete beams hybridly reinforced by continuous FRP bars and discrete steel fibers. In: Structures, v. 38 (April 2022).
- (2022): Energy-Efficient Rail Transit Vertical Alignment Optimization: Gaussian Pseudospectral Method. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 1 (January 2022).
- (2022): An experimental investigation on the impermeability and durability of concrete with a novel and multifunctional hydrophobic admixture addition. In: Structural Concrete, v. 23, n. 2 (April 2022).
- (2021): Influence of Coverage of Fin-shaped Rods on Flow-induced Vibration and Power Extraction of Cylinder-based Wind Energy Harvester. In: Smart Materials and Structures, v. 30, n. 6 (April 2021).
- (2021): Experimental investigation on chloride-ion penetration resistance of slag containing fiber-reinforced concrete under drying-wetting cycles. In: Construction and Building Materials, v. 274 (March 2021).
- (2021): Experimental study on water absorption of unsaturated concrete: w/c ratio, coarse aggregate and saturation degree. In: Construction and Building Materials, v. 272 (February 2021).
- (2021): Influence of a novel hydrophobic agent on freeze–thaw resistance and microstructure of concrete. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Effects of installation position of fin-shaped rods on wind-induced vibration and energy harvesting of aeroelastic energy converter. In: Smart Materials and Structures, v. 30, n. 2 (December 2020).
- (2016): Evaluation of manikin simplification methods for CFD simulations in occupied indoor environments. In: Energy and Buildings, v. 127 (September 2016).
- (2020): Evaluation of cough-jet effects on the transport characteristics of respiratory-induced contaminants in airline passengers’ local environments. In: Building and Environment, v. 183 (October 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. In: Magazine of Concrete Research, v. 72, n. 3 (February 2020).
- (2017): Empirical Study of BIM Implementation–Based Perceptions among Chinese Practitioners. In: Journal of Management in Engineering (ASCE), v. 33, n. 5 (September 2017).
- (2019): Experimental investigation on flexural behavior of hybrid fibers reinforced recycled brick aggregates concrete. In: Construction and Building Materials, v. 227 (December 2019).
- (2018): In situ monitoring the deterioration processes of hardened cement pastes and mortars exposed to continuous heating. In: Construction and Building Materials, v. 192 (December 2018).
Structurae cooperates with
