Peng Xu 
- (2025): Effect of CO2 curing on the strength and microstructure of composite waste glass concrete. In: Construction and Building Materials, v. 463 (February 2025).
- (2025): Automatic Generation of Pipe Routing for Variable Refrigerant Flow Air Conditioning System. In: Journal of Building Engineering, v. 100 (April 2025).
- (2025): Data-driven building load prediction and large language models: Comprehensive overview. In: Energy and Buildings, v. 326 (January 2025).
- (2024): Comparative assessment of the interlayer shear strength of asphalt concrete with carbon fiber geogrid as reinforcement. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Automatic device arrangement and wiring for fire alarm systems in metro stations: A case study. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Effects of confined distance and wire spacing on flame spread over double electrical wires for the layout design in buildings. In: Journal of Building Engineering, v. 92 (September 2024).
- (2023): BIM-Based Automated Multi-Air Distribution Layout Generation for Office Buildings: A Case Study. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Design, fabrication and mechanical properties of a 3D re-entrant metastructure. In: Composite Structures, v. 314 (June 2023).
- (2023): Dynamic Performance and Stress Wave Propagation Characteristics of Parallel Jointed Rock Mass Using the SHPB Technique. In: KSCE Journal of Civil Engineering, v. 27, n. 5 (March 2023).
- (2022): Automatic fault diagnosis algorithm for hot water pipes based on infrared thermal images. In: Building and Environment, v. 218 (June 2022).
- (2022): Development of a key-variable-based parallel HVAC energy predictive model. In: Building Simulation, v. 15, n. 7 (18 February 2022).
- (2022): BIM-based automated design for HVAC system of office buildings—An experimental study. In: Building Simulation, v. 15, n. 7 (18 February 2022).
- (2021): An adsorption-based CO2 treatment unit for ultra-low fresh air HVAC system using solid amine. In: Energy and Buildings, v. 247 (September 2021).
- (2020): Data mining algorithm and framework for identifying HVAC control strategies in large commercial buildings. In: Building Simulation, v. 14, n. 1 (November 2020).
- (2019): Data mining based framework to identify rule based operation strategies for buildings with power metering system. In: Building Simulation, v. 12, n. 2 (January 2019).
- (2016): Data-quality detection and recovery for building energy management and control systems: Case study on submetering. In: Science and Technology for the Built Environment, v. 22, n. 6 (August 2016).
- (2020): Effect of retarder on hydration properties of light-burned magnesia. In: Construction and Building Materials, v. 263 (December 2020).
- (2012): Case study: Energy savings from solar window film in two commercial buildings in Shanghai. In: Energy and Buildings, v. 45 (February 2012).
- (2016): An alternative method to predict future weather data for building energy demand simulation under global climate change. In: Energy and Buildings, v. 113 (February 2016).
- (2019): Estimating demand response potential under coupled thermal inertia of building and air-conditioning system. In: Energy and Buildings, v. 182 (January 2019).
- (2020): Buckling of composite laminates with multiple delaminations: Part I Theoretical and numerical analysis. In: Composite Structures, v. 250 (October 2020).
- (2020): Effect of Epoxy Resin Emulsion on the Mechanical Properties of Oil Well Cement-Based Composites. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2021): Causes of low delta-T syndrome for chilled water systems in buildings. In: Journal of Building Engineering, v. 33 (January 2021).
- (2020): Effect of modified sepiolite and carbon fiber composite on performance of oil-well cement and mechanism analysis. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Application of mobile positioning occupancy data for building energy simulation: An engineering case study. In: Building and Environment, v. 141 (August 2018).
- (2019): Effect of sulfate ions on corrosion of reinforced steel treated by DNA corrosion inhibitor in simulated concrete pore solution. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Compressive strength and cracking of composite concrete in hot-humid environments based on microscopic quantitative analysis. In: Construction and Building Materials, v. 225 (November 2019).
- (2019): Calculation of Natural Frequencies of Retaining Walls Using the Transfer Matrix Method. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2011): Analysis of vibration reduction characteristics and applicability of steel-spring floating-slab track. In: Journal of Modern Transportation, v. 19, n. 4 (December 2011).
- (2015): Effect of cattle manure ash on strength, workability and water permeability of concrete. In: Construction and Building Materials, v. 84 (June 2015).
Structurae cooperates with
