Juhyuk Moon 
- (2024): Enhanced hydration reaction of synthesized C4A0.81F1.19 with the use of different grinding agents. In: Materials and Structures, v. 57, n. 9 (10 October 2024).
- (2024): Enhancing the mechanical and thermal properties of foam concrete by incorporating glass lightweight microspheres. In: Construction and Building Materials, v. 447 (October 2024).
- (2024): Durability study of Portland cement blended with metakaolin from thermodynamic modeling. In: Journal of Building Engineering, v. 89 (July 2024).
- (2024): A comparative investigation of hydration reaction of Portland cement with the use of alkanolamine as a chemical admixture or grinding agent under laboratory condition. In: Journal of Building Engineering, v. 88 (July 2024).
- (2024): Early-age shrinkage and hydration of concrete incorporating a mutually reinforcing systems of super absorbent polymers and MgO expansive agent under low humidity conditions. In: Construction and Building Materials, v. 417 (February 2024).
- (2023): A comparative study of alkanolamines and inorganic additives on the microstructure development of blast furnace slag blended cement at low curing temperature. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Computational model to estimate chloride diffusivity by ternary random walk simulation on tomographic 3D microstructure of cement matrix. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Alkanolamine-based chemically enhanced hydration reaction of ordinary Portland cement. In: Construction and Building Materials, v. 409 (December 2023).
- (2022): Fundamental Discrepancy of Chemical Reactivity of Tricalcium Oxy Silicate (alite), Dicalcium Silicate (Belite), and Their Polymorphs: A Density Functional Theory Study. In: International Journal of Concrete Structures and Materials, v. 16, n. 1 (December 2022).
- (2023): Experimental study on tracing the initial water–to-cement ratio of hardened concrete using petrography analysis. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Effects of various sizes of cenospheres on microstructural, mechanical, and thermal properties of high-strength and lightweight cementitious composites. In: Journal of Building Engineering, v. 76 (October 2023).
- (2020): Carbon nanotubes (CNTs) in ultra-high performance concrete (UHPC): Dispersion, mechanical properties, and electromagnetic interference (EMI) shielding effectiveness (SE). In: Cement and Concrete Research, v. 131 (May 2020).
- (2012): High pressure study of low compressibility tetracalcium aluminum carbonate hydrates 3CaO·Al2O3·CaCO3·11H2O. In: Cement and Concrete Research, v. 42, n. 1 (January 2012).
- (2017): Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions. In: Cement and Concrete Research, v. 97 (July 2017).
- (2014): Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (μ-SXRD). In: Cement and Concrete Research, v. 59 (May 2014).
- (2022): Effect of casting geometry on distributions of segmented steel fibers in ultra-high performance fiber-reinforced concrete. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Gradient-based phase segmentation method for characterization of hydrating cement paste microstructures obtained from X-ray micro-CT. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Controlling hydration and setting of UHPC incorporating waterglass at different times of addition. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Early-age mechanical properties and microstructures of Portland cement mortars containing different admixtures exposed to seawater. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): High-accuracy rebar position detection using deep learning–based frequency-difference electrical resistance tomography. In: Automation in Construction, v. 135 (March 2022).
- (2021): Flow distance induced variation analysis of digitally segmented steel fibers in UHPFRC. In: Construction and Building Materials, v. 303 (October 2021).
- (2018): Early strength development in cement-treated sand using low-carbon rapid-hardening cements. In: Soils and Foundations, v. 58, n. 5 (October 2018).
- (2020): Application of micro-CT to Mori-Tanaka method for non-randomly oriented pores in air-entrained cement pastes. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Controlling the hydration and carbonation in lime-based materials: Advantage of slow carbonation in CO2 curable construction materials. In: Construction and Building Materials, v. 249 (July 2020).
- (2018): The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete. In: Construction and Building Materials, v. 172 (May 2018).
- (2018): The effect of water and gypsum content on strätlingite formation in calcium sulfoaluminate-belite cement pastes. In: Construction and Building Materials, v. 166 (March 2018).
- (2014): Degradation of flexural strength in reinforced concrete members caused by steel corrosion. In: Construction and Building Materials, v. 54 (March 2014).
- (2019): Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement. In: Construction and Building Materials, v. 197 (February 2019).
- (2013): Advanced Nanoscale Characterization of Cement Based Materials Using X-Ray Synchrotron Radiation: A Review. In: International Journal of Concrete Structures and Materials, v. 7, n. 2 (May 2013).
- (2018): CSA-Treated Sand for Geotechnical Application: Microstructure Analysis and Rapid Strength Development. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 12 (December 2018).
Structurae cooperates with
