Yu Liu 
- (2024): Experimental study on creep characteristics of glazed hollow beads-cement/sodium silicate grouting materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Evaluating the bikeability of urban streets using dockless shared bike trajectory data. In: Sustainable Cities and Society, v. 101 (February 2024).
- (2024): Effects of natural weathering on the mechanical properties of Moso bamboo internodes and nodes. In: Construction and Building Materials, v. 417 (February 2024).
- (2023): Improving flame retardancy, fume suppression and mechanical properties of SBS modified binder using nano-porous fibers prepared by electrospinning. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Heterogeneous distribution of lightweight porous ceramic sands in a high strength cement grout. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Fabric electromagnetic actuators. In: Smart Materials and Structures, v. 33, n. 1 (December 2023).
- (2024): Experimental investigation of the dynamic mechanical properties of concrete under different strain rates and cyclic loading. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Fatigue properties of OSD in large cantilever cable-stayed bridge on highway-railway layer. In: Journal of Constructional Steel Research, v. 211 (December 2023).
- (2023): Global method for nonlinear seismic analysis of embedded base-isolated nuclear island buildings in layered sites. In: Structures, v. 56 (October 2023).
- (2023): How building and street morphology affect CO2 emissions: Evidence from a spatially varying relationship analysis in Beijing. In: Building and Environment, v. 236 (May 2023).
- (2023): Experimental and numerical study on hysteretic behavior of Double-Layer and Single-Layer aluminum alloy gusset joints. In: Structures, v. 48 (February 2023).
- (2023): Experimental and analytical investigations on tension stiffening of reinforced engineered cementitious composites members. In: Structures, v. 48 (February 2023).
- (2023): High-resolution spatial assessment of the zero energy potential of buildings with photovoltaic systems at the city level. In: Sustainable Cities and Society, v. 93 (June 2023).
- (2023): Effects of pre-curing temperatures on the mechanical properties and microstructural development of impregnated municipal solid waste incineration bottom ash mortar. In: Construction and Building Materials, v. 369 (March 2023).
- (2023): The impact of interregional trade on both quantity- and quality-related water scarcity of Beijing-Tianjin-Hebei urban agglomeration in China. In: Sustainable Cities and Society, v. 88 (January 2023).
- (2022): Experimental study of the working property and strength behavior of waste marine clay with high water content modified with quicklime, ground calcium carbonate, and a WXS-II soil stabilizer. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Experimental study of dynamic bond behaviour between corroded steel reinforcement and concrete. In: Construction and Building Materials, v. 356 (November 2022).
- (2021): Fabrication of MoS2-based environment friendly modifier via tannic acid assisted diethylenetriamine co-deposition for the preparation of composite SBS modified asphalt. In: Construction and Building Materials, v. 285 (May 2021).
- (2022): The incentive mechanism and decision-making behavior in the green building supply market: A tripartite evolutionary game analysis. In: Building and Environment, v. 214 (April 2022).
- (2022): Experimental characterization of particle distribution during the process of reducing the air supply volume in an electronic industry cleanroom. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Fast deposition of Fe3+ chelated tannic acid network via salt induction over graphene oxide based SBS modified asphalt. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Fabrication of IPDI-LDHs/SBS modified asphalt with enhanced thermal aging and UV aging resistance. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): The effects of portable cooling systems on thermal comfort and work performance in a hot environment. In: Building Simulation, v. 14, n. 6 (April 2021).
- (1997): Estimating Minimum Fixed Biomass Concentration and Active Thickness of Nitrifying Biofilm. In: Journal of Environmental Engineering (ASCE), v. 123, n. 2 (February 1997).
- (2020): How to Achieve Efficiency and Accuracy in Discrete Element Simulation of Asphalt Mixture: A DRF-Based Equivalent Model for Asphalt Sand Mortar. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): High-sensitive and stretchable resistive strain gauges: Parametric design and DIW fabrication. In: Composite Structures, v. 223 (September 2019).
- (2013): Experimental and Numerical Study on the Effect of Construction Defects on the Stability of Tunnel. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): The effects of sodium citrate on compressive strength and paste microstructure of self-compacting concrete. In: Construction and Building Materials, v. 260 (November 2020).
- (2018): Experimental and statistical study on the irregularity of carbonation depth of cement mortar under supercritical condition. In: Construction and Building Materials, v. 174 (June 2018).
- (2019): Fabrication and properties of wide temperature domain pavement seaweed modified bio-bitumen. In: Construction and Building Materials, v. 227 (December 2019).
Structurae cooperates with
