Jing Liu 
- (2024): Optimization for the temperature range of radiator for preventing draught risk of cold window. In: Energy and Buildings, v. 323 (November 2024).
- (2024): A novel Star-4 honeycomb with the inclined ligaments for enhanced tunability of wave propagation behaviors. In: Composite Structures, v. 346 (October 2024).
- (2024): Natural ventilation of underground shelters to improve indoor thermal and moisture environments in the various climates of China. In: Tunnelling and Underground Space Technology, v. 153 (November 2024).
- (2024): Optimization of the Mechanical Properties of Bolted Connections between Concrete-Filled Tubular Columns and Steel Beam with Reinforcing Rings. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): An online fault detection and diagnosis method of sensors in district heating substations based on long short_term memory network and adaptive threshold selection algorithm. In: Energy and Buildings, v. 308 (April 2024).
- (2024): Rapid prediction of indoor airflow field using operator neural network with small dataset. In: Building and Environment, v. 251 (March 2024).
- (2024): Optimizing measurement schemes to improve indoor airflow and temperature CFD–EnKF joint simulation. In: Building and Environment, v. 248 (January 2024).
- (2023): Predictive Displacement Models Considering the Probability of Pulse-Like Ground Motions for Earthquake-Induced Landslides Hazard Assessment. In: Journal of Earthquake Engineering, v. 28, n. 7 (November 2023).
- (2023): Prediction of urban airflow fields around isolated high-rise buildings using data-driven non-linear correction models. In: Building and Environment, v. 246 (December 2023).
- (2023): A review of mega-project management research from an organization science perspective: Current status and future directions. In: Developments in the Built Environment, v. 16 (December 2023).
- (2023): Pseudo-dynamic analysis of a 3D tunnel face in inclined weak strata. In: Underground Space, v. 12 (October 2023).
- (2023): Robustness analysis of magnetorheological elastomer-based vibration isolation system with optimal fuzzy controller. In: Smart Materials and Structures, v. 32, n. 3 (1 February 2023).
- (2022): A new permanent displacement model considering pulse-like ground motions and its application in landslide hazard assessment. In: Soil Dynamics and Earthquake Engineering, v. 163 (December 2022).
- (2022): Seismic Stability of 3D Tunnel Face considering Tensile Strength Cut-Off. In: KSCE Journal of Civil Engineering, v. 26, n. 8 (1 July 2022).
- (2021): Research on the Wing-Type Antiscour Device of Pier Based on Scour Test and Numerical Simulation. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2017): Searching for a Parking Spot in a Large City Center. In: Journal of Highway and Transportation Research and Development (English Edition), v. 11, n. 1 (March 2017).
- (2009): A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof. In: Energy and Buildings, v. 41, n. 8 (August 2009).
- (2012): A method to weight three categories of adaptive thermal comfort. In: Energy and Buildings, v. 47 (April 2012).
- (2017): Practical moisture buffering effect of three hygroscopic materials in real-world conditions. In: Energy and Buildings, v. 139 (March 2017).
- (2017): Preliminary assessment of the wind power resource around the thousand-meter scale megatall building. In: Energy and Buildings, v. 142 (May 2017).
- (2020): On-site measurement and zonal simulation on winter indoor environment and air infiltration in an atrium in a severe cold region. In: Energy and Buildings, v. 223 (September 2020).
- (2013): Planning and Design of Contemporary Villa District. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2019): Research of near-wall thermodynamic state for indoor airflow over the vertical heating unit using TIV/PIV/RTD. In: Building and Environment, v. 165 (November 2019).
- (2019): Physiological and thermal response to real-life transient conditions during winter in severe cold area. In: Building and Environment, v. 157 (June 2019).
- (2018): Quantitative effects of urban spatial characteristics on outdoor thermal comfort based on the LCZ scheme. In: Building and Environment, v. 143 (October 2018).
- (2018): Outdoor thermal comfort and adaptation in severe cold area: A longitudinal survey in Harbin, China. In: Building and Environment, v. 143 (October 2018).
- (2015): Revisiting the ‘Venturi effect’ in passage ventilation between two non-parallel buildings. In: Building and Environment, v. 94 (December 2015).
- (2015): Rheological Behavior, Segregation, Microstructure, and Construction Quality of Cement-Emulsified Asphalt Mortar with Associative Thickener. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 11 (November 2015).
- (2019): Robust Dual-Level Optimization Framework for Resource-Constrained Multiproject Scheduling for a Prefabrication Facility in Construction. In: Journal of Computing in Civil Engineering, v. 33, n. 2 (March 2019).
- (2018): Optimizing the thermal performance of building envelopes for energy saving in underground office buildings in various climates of China. In: Tunnelling and Underground Space Technology, v. 77 (July 2018).
Structurae cooperates with
