Jing Liu 
- (2024): Integrating NSGA-II and CFD for enhanced urban airflow prediction: Recalibration of closure coefficients for a nonlinear eddy viscosity model. In: Building and Environment, v. 259 (July 2024).
- (2015): Mechanical behavior of circular and square concrete filled steel tube stub columns under local compression. In: Thin-Walled Structures, v. 94 (September 2015).
- (2024): Optimization of the Mechanical Properties of Bolted Connections between Concrete-Filled Tubular Columns and Steel Beam with Reinforcing Rings. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): Investigation of Rates of Demolition Waste Generated in Decoration and Renovation Projects: An Empirical Study. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2024): An online fault detection and diagnosis method of sensors in district heating substations based on long short_term memory network and adaptive threshold selection algorithm. In: Energy and Buildings, v. 308 (April 2024).
- (2024): Optimizing measurement schemes to improve indoor airflow and temperature CFD–EnKF joint simulation. In: Building and Environment, v. 248 (January 2024).
- (2022): A new permanent displacement model considering pulse-like ground motions and its application in landslide hazard assessment. In: Soil Dynamics and Earthquake Engineering, v. 163 (December 2022).
- (2022): Improving indoor air flow and temperature prediction with local measurements based on CFD-EnKF data assimilation. In: Building and Environment, v. 223 (September 2022).
- (2022): An Infrared and Visible Image Fusion Method Based on Fuzzy Pulse Coupled Neural Network And Salience Detection. In: DYNA, v. 97, n. 5 (1 September 2022).
- (2022): Indoor Thermal Environment during Heating Season and the Health of Elderly in China. In: Science and Technology for the Built Environment, v. 28, n. 7 (August 2022).
- (2021): Investigation on strength characteristics of bio-asphalt mixtures based on the time–temperature equivalence principle. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Impact of Brine on Disjoining Pressure and Rock Wettability of Oil, Brine, and Mineral Systems. In: Journal of Energy Engineering, v. 148, n. 4 (August 2022).
- (2021): Indoor-outdoor relationship of PM2.5 mass concentrations in severe cold regions based on a coupled canopy model. In: Sustainable Cities and Society, v. 75 (December 2021).
- (2021): Improvements on performance of bio-asphalt modified by castor oil-based polyurethane: An efficient approach for bio-oil utilization. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Investigation of fungal contamination in urban houses with children in six major Chinese cities: Genus and concentration characteristics. In: Building and Environment, v. 205 (November 2021).
- (2021): A method for judging the overheating of the radiator in the compensation of window downdraught based on thermal image velocimetry. In: Building and Environment, v. 197 (June 2021).
- (2009): A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof. In: Energy and Buildings, v. 41, n. 8 (August 2009).
- (2012): A method to weight three categories of adaptive thermal comfort. In: Energy and Buildings, v. 47 (April 2012).
- (2020): Machine learning-based leakage fault detection for district heating networks. In: Energy and Buildings, v. 223 (September 2020).
- (2020): On-site measurement and zonal simulation on winter indoor environment and air infiltration in an atrium in a severe cold region. In: Energy and Buildings, v. 223 (September 2020).
- (2020): Indoor PM2.5 concentrations during winter in a severe cold region of China: A comparison of passive and conventional residential buildings. In: Building and Environment, v. 180 (August 2020).
- (2018): Investigating particles, VOCs, ROS produced from mosquito-repellent incense emissions and implications in SOA formation and human health. In: Building and Environment, v. 143 (October 2018).
- (2018): Outdoor thermal comfort and adaptation in severe cold area: A longitudinal survey in Harbin, China. In: Building and Environment, v. 143 (October 2018).
- (2017): An integrated local climatic evaluation system for green sustainable eco-city construction: A case study in Shenzhen, China. In: Building and Environment, v. 114 (March 2017).
- (2011): The impact of temperature on mean local air age and thermal comfort in a stratum ventilated office. In: Building and Environment, v. 46, n. 2 (February 2011).
- (2016): Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression. In: Thin-Walled Structures, v. 99 (February 2016).
- (2016): Flexural stiffness of steel-concrete composite beam under positive moment. In: Steel and Composite Structures, v. 20, n. 6 ( 2016).
- (2019): Flexural Capacity of Steel-Concrete Composite Beams under Hogging Moment. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Optimizing the thermal performance of building envelopes for energy saving in underground office buildings in various climates of China. In: Tunnelling and Underground Space Technology, v. 77 (July 2018).
- (2018): Influence of the Stabilizer on Interfacial Bonding Behavior of Cement Asphalt Mortar in Slab Ballastless Track. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (October 2018).
Structurae cooperates with
