Jun Li 
- : Effect of carbodiimides on the compatibility and hydrolytic behavior of PLA/PBAT blends. In: Green Materials.
- (2024): Early hydration and mechanical performance of composited cementitious system prepared from high temperature calcined molybdenum tailings. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Durability Evaluation of MICP-Repaired Concrete Exposed to the Freeze–Thaw Process. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 12 (December 2024).
- (2024): Dynamic response of calcareous sands shallow-buried reinforced concrete slab under surface explosion. In: Structures, v. 67 (September 2024).
- (2024): Development and validation of an innovative uplift-restraining friction pendulum bearing. In: Engineering Structures, v. 309 (June 2024).
- (2024): Effect of stirrup ratio on response of ultra-high performance concrete beams subjected to low-velocity impact loadings. In: Journal of Building Engineering, v. 92 (September 2024).
- (2024): The Dynamic Compressive Behavior of Waved Fiber-Reinforced Ultrahigh-Performance Cementitious Composites Containing Fly Ash and Ground Granulated Blast-Furnace Slag. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2023): Effect of brick-based construction and demolition waste on the performance and microstructure of lightweight aggregate concrete. In: Journal of Building Engineering, v. 78 (November 2023).
- (2022): Effect of steel fiber type and content on the dynamic tensile properties of ultra-high performance cementitious composites (UHPCC). In: Construction and Building Materials, v. 342 (August 2022).
- (2017): The Effect of Temporal Resolution on the Accuracy of Predicting Building Occupant Behaviour based on Markov Chain Models. In: Procedia Engineering, v. 205 ( 2017).
- (2022): Effects of Parameter Selections on Fitting Vertical Curves to Data. In: Journal of Surveying Engineering (ASCE), v. 148, n. 2 (May 2022).
- (2021): Effect of Point Configurations on Parameter Estimation Analysis of Circles. In: Journal of Surveying Engineering (ASCE), v. 147, n. 3 (August 2021).
- (2021): Dynamic response reconstruction for structural health monitoring using densely connected convolutional networks. In: Structural Health Monitoring, v. 20, n. 4 (April 2021).
- (2021): Dynamic behaviors of reinforced NSC and UHPC columns protected by aluminum foam layer against low-velocity impact. In: Journal of Building Engineering, v. 34 (February 2021).
- (2008): Dynamic stiffness analysis for free vibrations of axially loaded laminated composite beams. In: Composite Structures, v. 84, n. 1 (June 2008).
- (2020): Effect of hydrated lime on structures and properties of decorative rendering mortar. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Effect of Adding Methylcellulose on Mechanical and Vibration Properties of Geopolymer Paste and Hybrid Fiber-Reinforced Geopolymer Composite. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (July 2020).
- (2018): Effects of bentonite slurry on air-void structure and properties of foamed concrete. In: Construction and Building Materials, v. 179 (August 2018).
- (2015): Dynamic responses of a three-span continuous girder bridge with variable cross-section based on vehicle–bridge coupled vibration analysis. In: The IES Journal Part A: Civil & Structural Engineering, v. 8, n. 2 (April 2015).
- (2019): Effect of nanoparticles on foaming agent and the foamed concrete. In: Construction and Building Materials, v. 227 (December 2019).
- (2014): Dynamic stiffness analysis of steel-concrete composite beams. In: Steel and Composite Structures, v. 16, n. 6 (June 2014).
- (2019): Effect of Na/Al on formation, structures and properties of metakaolin based Na-geopolymer. In: Construction and Building Materials, v. 226 (November 2019).
- (2019): Effect of nano-SiO2 on early hydration of natural hydraulic lime. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Effect of retarders on the early hydration and mechanical properties of reactivated cementitious material. In: Construction and Building Materials, v. 212 (July 2019).
- (2019): Effect of Temperature on Mechanical Performance and Tensoresistivity of a New Sensor-Enabled Geosynthetic Material. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 6 (June 2019).
- (2019): Effect of activated silica on polymerization mechanism and strength development of MSWI bottom ash alkali-activated mortars. In: Construction and Building Materials, v. 201 (March 2019).
- (2016): Effects of steel fibres on dynamic strength of UHPC. In: Construction and Building Materials, v. 114 (July 2016).
- (2017): Development of novel ultra-high performance concrete: From material to structure. In: Construction and Building Materials, v. 135 (March 2017).
- (2014): Dynamic Assessment of Shear Connectors in Composite Bridges with Ambient Vibration Measurements. In: Advances in Structural Engineering, v. 17, n. 5 (May 2014).
- (2016): Effects of Solar Temperature Gradient on Long-Span Concrete Box Girder during Cantilever Construction. In: Journal of Bridge Engineering (ASCE), v. 21, n. 3 (March 2016).
Structurae cooperates with
