Jun Li 
- (2024): Prediction of welding deformation in stiffened structures using a data-driven Def-GAN model. In: Journal of Constructional Steel Research, v. 221 (October 2024).
- (2024): Physics-guided deep learning based on modal sensitivity for structural damage identification with unseen damage patterns. In: Engineering Structures, v. 316 (October 2024).
- (2024): Out-of-plane full-field vibration displacement measurement with monocular computer vision. In: Automation in Construction, v. 165 (September 2024).
- (2024): Pore Formation and Performance Enhancement of Nanopore-Rich High Porosity Aerated Cement via Nanomontmorillonite. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (July 2024).
- (2023): Preparation and properties of Portland cement from secondary recycle waste of rare earth tailing. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Preparation, microstructure, performance and mortar application of paraffin/titanium-bearing blast furnace slag phase change aggregate. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Post-earthquake reliability assessment of segmental column structures based on nonlinear model updating. In: Engineering Structures, v. 283 (May 2023).
- (2023): Preparation and properties of high-strength lightweight aggregate ceramsite from nepheline tailings. In: Construction and Building Materials, v. 368 (March 2023).
- (2021): Properties and hydration mechanism of cement pastes in presence of nano-ZnO. In: Construction and Building Materials, v. 289 (June 2021).
- (2021): Preparation and performances of foamed hydraulic lime. In: Construction and Building Materials, v. 290 (July 2021).
- (2021): Projectile impact resistance of fibre-reinforced geopolymer-based ultra-high performance concrete (G-UHPC). In: Construction and Building Materials, v. 290 (July 2021).
- (2020): Preparation and Evaluation of Composite Flame Retardant Asphalt in Tunnel. In: IOP Conference Series: Materials Science and Engineering, v. 741, n. 1 (1 January 2020).
- (2016): Piezoelectric impedance based damage detection in truss bridges based on time frequency ARMA model. In: Smart Structures and Systems, v. 18, n. 3 (September 2016).
- (2022): Phase space reconstruction and Koopman operator based linearization of nonlinear model for damage detection of nonlinear structures. In: Advances in Structural Engineering, v. 25, n. 7 (April 2022).
- (2022): Preparation and thermal performance of phase change material (PCM) foamed cement used for the roof. In: Journal of Building Engineering, v. 53 (August 2022).
- (2022): Prevention and Control of Spontaneous Combustion of Residual Coals in Acid-Soaked Goaf in Gas Drainage Condition. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Performance of hydraulic lime by using carbide slag. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Post-fire mechanical properties of titanium–clad bimetallic steel in different cooling approaches. In: Journal of Constructional Steel Research, v. 191 (April 2022).
- (2021): Preparation and properties of nanopore-rich cement-based porous materials based on colloidal silica sol. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Predication of the residual axial load capacity of CFRP-strengthened RC column subjected to blast loading using artificial neural network. In: Engineering Structures, v. 242 (September 2021).
- (2020): Preface: Recent Research Advances on Structural Health Monitoring of Civil Engineering Structures. In: International Journal of Structural Stability and Dynamics, v. 20, n. 10 (September 2020).
- (2020): Pore structure and properties of porous geopolymer based on pre-swelled bentonite. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Preparation and properties of nanosilica-doped polycarboxylate superplasticizer. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Pore structure and hardened properties of aerogel/cement composites based on nanosilica and surface modification. In: Construction and Building Materials, v. 245 (June 2020).
- (2018): Preface: Recent Advances on Structural Control, Health Monitoring and Applications in Bridge Engineering. In: International Journal of Structural Stability and Dynamics, v. 18, n. 8 (August 2018).
- (2019): Preparation and hardened properties of lightweight gypsum plaster based on pre-swelled bentonite. In: Construction and Building Materials, v. 215 (August 2019).
- (2015): Preparation of carbon fiber reinforced cement-based composites using self-made carbon fiber mat. In: Construction and Building Materials, v. 79 (March 2015).
- (2019): Preparation and properties of nanopore-rich lightweight cement paste based on swelled bentonite. In: Construction and Building Materials, v. 199 (February 2019).
- (2019): Preparation and properties of ultra-lightweight EPS concrete based on pre-saturated bentonite. In: Construction and Building Materials, v. 195 (January 2019).
- (2017): Post-blast capacity of ultra-high performance concrete columns. In: Engineering Structures, v. 134 (March 2017).
Structurae cooperates with
