Bo Li 
- (2024): Theoretical Analysis of Drilling Unloading and Pile-Side Soil Pressure Recovery of Nonsqueezing Pipe Piles Installed in K0-Consolidated Soils. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2024): Shear performance of four-corner connected shear wall considering plate-frame connection ratio. In: Journal of Constructional Steel Research, v. 215 (April 2024).
- (2024): Shaking table test study on performance and functionality of a typical telecommunication room after earthquakes. In: Earthquake Engineering and Engineering Vibration, v. 23, n. 2 (April 2024).
- (2024): Study on the high temperature hydration characteristics of titanium extraction slag cementing fluid. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Seismic performance of reinforced concrete beam-column joints with diagonal bars wrapped by steel tubes: experimental, numerical and analytical study. In: Structures, v. 59 (January 2024).
- (2024): Study on Long-Span and Variable-Section Foundation Pit Excavation in Muddy Silty Clay. In: International Journal of Civil Engineering, v. 22, n. 5 (January 2024).
- (2023): A systematic critical review on policy-based initiatives of China's affordable housing: Challenges and opportunities. In: Developments in the Built Environment, v. 16 (December 2023).
- (2023): Selection of hazard-consistent ground motions for risk-based analyses of structures. In: Structural Safety, v. 104 (September 2023).
- (2023): Study on Horizontal Bearing Capacity of Pile Group Foundation Composed of Inclined and Straight Piles. In: Buildings, v. 13, n. 3 (26 February 2023).
- (2022): Trust repair in the aftermath of conflict occurrence in construction subcontracting: an intergroup contact perspective. In: Construction Management and Economics, v. 40, n. 10 (18 August 2022).
- (2022): Seismic Vibration Control of Atrium Buildings Using a Truss-Nonlinear Inertial Mass Damper System. In: International Journal of Structural Stability and Dynamics, v. 22, n. 14 (September 2022).
- (2022): Sustainable reuse of excavated soil and recycled concrete aggregate in manufacturing concrete blocks. In: Construction and Building Materials, v. 342 (August 2022).
- (2020): Stability Analysis of Slope and Diversion Water Tunnel of Hydropower Station under Strong Earthquake. In: Geotechnical and Geological Engineering, v. 39, n. 3 (18 November 2020).
- (2022): Structural behaviour of post-earthquake steel plate shear wall repaired by non-welded oblique stiffeners. In: Structures, v. 39 (May 2022).
- (2021): Stiffness and strength development of the soft clay stabilized by the one-part geopolymer under one-dimensional compressive loading. In: Soils and Foundations, v. 61, n. 4 (August 2021).
- (2021): Seismic behaviour of steel plate shear wall with non-welded oblique multi-ribs. In: Structures, v. 31 (June 2021).
- (2021): Seismic performance of reinforced concrete interior beam-column joints with novel reinforcement detail. In: Engineering Structures, v. 227 (January 2021).
- (2020): Stiffness-tunable robotic gripper driven by dielectric elastomer composite actuators. In: Smart Materials and Structures, v. 29, n. 12 (30 October 2020).
- (2020): Seismic collision potential of adjacent base-isolated buildings with corridor bridges subjected to bidirectional near-fault pulse-like ground motions. In: Soil Dynamics and Earthquake Engineering, v. 135 (August 2020).
- (2020): Seismic retrofit design and risk assessment of an irregular thermal power plant building. In: The Structural Design of Tall and Special Buildings, v. 29, n. 6 (25 April 2020).
- (2020): Seismic behaviour and failure-mode-prediction method of a reinforced-concrete rigid-frame bridge with thin-walled tall piers: Investigation by model-updating hybrid test. In: Engineering Structures, v. 208 (April 2020).
- (2020): Study on the fire resistance performance of cementitious composites containing recycled glass cullets (RGCs). In: Construction and Building Materials, v. 242 (May 2020).
- (2020): Simple discrete models for dynamic structure-soil-structure interaction analysis. In: Engineering Structures, v. 206 (March 2020).
- (2015): Strengthening of non-seismically designed beam-column joints by ferrocement jackets with chamfers. In: Earthquakes and Structures, v. 8, n. 5 (May 2015).
- (2019): Stretchable photonic crystals with periodic cylinder shaped air holes for improving mechanochromic performance. In: Smart Materials and Structures, v. 28, n. 7 (July 2019).
- (2015): The Stress-related Damping Ratio of Box Girder with Corrugated Steel Webs. In: The Open Civil Engineering Journal, v. 8, n. 1 (June 2015).
- (2015): The Stress-related Damping Ratio of Box Girder with Corrugated Steel Webs. In: The Open Civil Engineering Journal, v. 8, n. 1 (June 2015).
- (2011): Thermo-electro-mechanical instability of dielectric elastomers. In: Smart Materials and Structures, v. 20, n. 7 (July 2011).
- (2013): Slope stability analysis based on a multigrid method using a nonlinear 3D finite element model. In: Frontiers of Structural and Civil Engineering, v. 7, n. 1 (February 2013).
- (2018): Stacked dielectric elastomer actuator (SDEA): casting process, modeling and active vibration isolation. In: Smart Materials and Structures, v. 27, n. 7 (July 2018).
Structurae cooperates with
