Bo Li 
- (2025): Effect of Fe2O3 content on clinkerization of low calcium carbonatable belite-rankinite clinker. In: Construction and Building Materials, v. 463 (February 2025).
- (2024): Effect of naphthenic oil and viscosity reduction process on fatigue life and rheological properties of crumb rubber modified asphalt. In: Construction and Building Materials, v. 455 (December 2024).
- (2024): Comprehensive analysis of compatibility and low-temperature rheological properties of SBS modified asphalt binder using entropy weight-TOPSIS method. In: Construction and Building Materials, v. 457 (December 2024).
- (2024): Development of polyurethane urea（PUU）– Waste rubber particles (WRP) composite materials for active ice-breaking of groove-filled asphalt pavement. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Development of cold-bond artificial aggregate with excavated soil and alkali-activated slag. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Data-driven predicting of bond strength in corroded BFRP concrete structures. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Effect of Clogging and Cleaning on the Air Void Microstructure of Porous Asphalt Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 8 (August 2024).
- (2024): Disc-cutter induced rock breakage mechanism for TBM excavation in rock masses with different joint shear strengths. In: Underground Space, v. 19 (December 2024).
- (2023): Development of a High-Power Density Diesel Engine with a Heat-Insulation Coating: Application of Ultrahigh-Pressure Fuel Injection. In: Journal of Energy Engineering, v. 149, n. 5 (October 2023).
- (2023): Development of rejuvenator using waste vegetable oil and its influence on pavement performance of asphalt binder under ultraviolet aging. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Coupling effect of freeze–thaw cycles and multiaxial compression on concrete-filled steel tube (CFST): Insights from simplified meso-scale axisymmetric finite element model. In: Engineering Structures, v. 280 (April 2023).
- (2023): Confinement-dependent failure criterion for high-strength concrete in multiaxial stress states. In: Construction and Building Materials, v. 366 (February 2023).
- (2023): Effect of graphene oxide in different phases on the high temperature rheological properties of asphalt based on grey relational and principal component analysis. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Effect of Fiber Characteristic Parameters on the High and Low Temperature Rheological Properties of Basalt Fiber Modified Asphalt Mortar. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Critical Stress Determination of Local and Distortional Buckling of Lipped Angle Columns under Axial Compression. In: Buildings, v. 12, n. 6 (7 June 2022).
- (2019): The Comprehensive Prediction Model of Rockburst Tendency in Tunnel Based on Optimized Unascertained Measure Theory. In: Geotechnical and Geological Engineering, v. 37, n. 4 (6 March 2019).
- (2019): An EEMD-Based Denoising Method for Seismic Signal of High Arch Dam Combining Wavelet with Singular Spectrum Analysis. In: Shock and Vibration, v. 2019 (January 2019).
- (2022): Dynamic Shear Modulus and Damping Ratio of the One-Part Geopolymer Stabilized Soft Clay. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (July 2022).
- (2022): Crushing behavior and energy absorption of a bio-inspired bi-directional corrugated lattice under quasi-static compression load. In: Composite Structures, v. 286 (April 2022).
- (2022): Compressive Behavior of Predamaged Concrete Cylinders Repaired with Jute and Basalt FRP Composites: A Comparative Study. In: Journal of Composites for Construction, v. 26, n. 3 (June 2022).
- (2022): Dynamic Multiobjective Optimal Dispatch of Distribution Network Considering Time of Use–Based Demand Response. In: Journal of Energy Engineering, v. 148, n. 2 (April 2022).
- (2007): Design of supplemental viscous dampers in inelastic SDOF system based on improved capacity spectrum method. In: Structural Engineering and Mechanics, v. 27, n. 5 (November 2007).
- (2021): Crack monitoring and damage assessment of BFRP-jacketed concrete cylinders under compression load based on acoustic emission techniques. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Effect of alkali contents, moduli and curing time on engineering properties of alkali activated slag. In: Construction and Building Materials, v. 249 (July 2020).
- (2015): Effect of High Axial Load on Seismic Behavior of Reinforced Concrete Beam-Column Joints with and without Strengthening. In: ACI Structural Journal, v. 112, n. 6 (November 2015).
- (2016): A Dynamic Forbidden Sector Skipping Strategy in Thrust Allocation for Marine Vessels. In: International Journal of Offshore and Polar Engineering, v. 26, n. 2 (June 2016).
- (2016): Dynamic Behavior and Liquefaction Analysis of Recycled-Rubber Sand Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 11 (November 2016).
- (2016): Effect of polyaluminum chloride on the properties and hydration of slag-cement paste. In: Construction and Building Materials, v. 124 (October 2016).
- (2013): Effect of abutment excitation on bridge pounding. In: Engineering Structures, v. 54 (September 2013).
- (2018): Design and analysis of a bi-stable linear force actuator for directly-driven metering pump. In: Smart Materials and Structures, v. 27, n. 10 (October 2018).
Structurae cooperates with
