Tobias Huber 
- (2023): Structural design and testing of material optimized ribbed RC slabs with 3D printed formwork. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2023): Experimental investigation and mechanical modelling of shear failure in reinforced concrete members with plain and ribbed bent-up bars. In: Engineering Structures, v. 283 (May 2023).
- (2022): Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction. In: RILEM Technical Letters, v. 7 (August 2022).
- (2022): Design and fabrication of optimised ribbed concrete floor slabs using large scale 3D printed formwork. In: Automation in Construction, v. 144 (December 2022).
- (2021): Semi‐precast segmental bridges: Development of a new construction method using thin‐walled prefabricated concrete elements. In: Structural Concrete, v. 22, n. 3 (April 2021).
- (2022): Building bridges from thin-walled precast elements. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2022): Semi-Precast Segmental Bridge Construction Method: construction of a prototype and shear tests on cross-frames. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2021): Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): Shear connection between precast concrete bridge segments built with thin-walled elements. Presented at: IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021.
- (2019): Post tensioned box girder bridges made from thin-walled pre- fabricated elements. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2020): Querkrafttragverhalten von Stahlbetonbauteilen mit aufgebogenen Bewehrungsstäben auf Basis photogrammetrischer Messungen/Shear behavior of RC components with bent-up reinforcement bars based on photogrammetric measurements. In: Bauingenieur, v. 95, n. 6 (June 2020).
- (2021): Experimental investigation and analytical modelling of shear strength of thin walled textile-reinforced UHPC beams. In: Engineering Structures, v. 231 (March 2021).
- (2020): Querkraftmodell für bestehende Stahlbetonbauteile mit aufgebogenen Längsstäben. In: Beton- und Stahlbetonbau, v. 115, n. 10 (July 2020).
- (2020): Experimental and theoretical study on the shear behavior of single‐ and multi‐span T‐ and I‐shaped post‐tensioned beams. In: Structural Concrete, v. 21, n. 1 (February 2020).
- (2019): Influence of aggregate interlock on the shear resistance of reinforced concrete beams without stirrups. In: Engineering Structures, v. 186 (May 2019).
- (2017): Load carrying behaviour of beams with bent-up bars as shear reinforcement. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2017): Assessment of the shear strength of existing post-tensioned bridges. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2016): Investigation of the shear behavior of RC beams on the basis of measured crack kinematics. In: Engineering Structures, v. 113 (April 2016).
- (2018): Influence of loading conditions on the shear capacity of post-tensioned beams with low shear reinforcement ratios. In: Engineering Structures, v. 170 (September 2018).
- (2017): Umlenkkräfte bei Satteldachbindern. In: Beton- und Stahlbetonbau, v. 112, n. 11 (November 2017).
- (2018): Nachrechnung der Querkrafttragfähigkeit von mehrfeldrigen Spannbetonbrücken mit geringer Bügelbewehrung. In: Beton- und Stahlbetonbau, v. 113, n. 10 (October 2018).
- (2016): Rechnerische Beurteilung der Schubtragfähigkeit einer Spannbetonbrücke mit geringem Querkraftbewehrungsgrad - Erstmalige Anwendung des "Flexural Shear Crack"-Modells in der Praxis. In: Beton- und Stahlbetonbau, v. 111, n. 11 (November 2016).
Structurae cooperates with
